Which models does the Apex FHD cover?
The Apex FHD covers 2 models: Apex 14FHD, Apex 16FHD. Former and renamed designations are listed in the models table on this page.
2018 · 2 models


Select a model to jump to its component table; former and renamed designations are listed under “Historical names / renamings”.
| Model | Period | Components |
|---|---|---|
| Apex 14FHD | 2018 | 9 |
| Apex 16FHD | 2018 | 9 |
The numbers on the diagram correspond one to one with the rows below.
| No. | Component | Location | Applies to |
|---|---|---|---|
| 1 | Electric power motor | Original 1: hydraulic power-unit motor | Apex 14FHD |
| 1 | Hydraulic pump | Hydraulic pump beside central power motor | Apex 16FHD |
| 2 | Variable-displacement hydraulic pump | Original 2: hydraulic pump beside power motor | Apex 14FHD |
| 2 | Hydraulic drive motor | Hydraulic drive at right end of rotating assembly | Apex 16FHD |
| 3 | Main-drive hydraulic motor | Original 3: main-drive inset | Apex 14FHD |
| 3 | Heat exchanger | Heat exchanger at right of platform | Apex 16FHD |
| 4 | Back-drive hydraulic motor | Original 4: back-drive inset | Apex 14FHD |
| 4 | Hydraulic reservoir | Rear-right DXP hydraulic reservoir | Apex 16FHD |
| 5 | Hydraulic reservoir | Original 5: reservoir below frame | Apex 14FHD |
| 5 | Control panel | Electrical cabinet on left | Apex 16FHD |
| 6 | Hydraulic heat exchanger | Original 6: heat exchanger on platform | Apex 14FHD |
| 7 | Electrical control panel | Original 7: right-side control panel | Apex 14FHD |
| 8 | Rotating assembly | Original 8: rotating-assembly location below cover | Apex 14FHD |
| Component |
|---|
| Bowl |
| Scroll conveyor |
| Solids discharge wear component |
| Liquid discharge port |
| Main bearing |
Models with the same components are grouped together; select a group to open its component table.
Models: Apex 14FHD, Apex 16FHD
| No. | Component | Location |
|---|---|---|
| 2 | Variable displacement hydraulic pump | Hydraulic power unit |
| 2 | Hydraulic drive motor | Drive end of the drum and screw |
| 3 | Heat exchanger | Hydraulic cooling circuit |
| 4 | Hydraulic oil tank | Hydraulic power unit |
| Rotating drum | Centrifugal separation working zone | |
| Screw conveyor | Conveying position inside the drum | |
| Solids outlet wear part | Solids discharge outlet of the drum | |
| Liquid outlet | Liquid-phase discharge end of the drum | |
| Main bearing | Support positions at both ends of the drum |
The Apex FHD covers 2 models: Apex 14FHD, Apex 16FHD. Former and renamed designations are listed in the models table on this page.
The Apex FHD is also documented under these designations: Apex 14FHD, Apex 16FHD.
The Apex FHD is listed under the Elgin brand. Period: 2018. Status: Historical model.
9 components are recorded, including: Rotating drum, Screw conveyor, Solids outlet wear part, Liquid outlet, Main bearing, Variable displacement hydraulic pump, Hydraulic drive motor, Hydraulic oil tank and more. The full list with locations is in the components table on this page.
Model-specific components with their own page: Rotating drum, Screw conveyor, Solids outlet wear part, Liquid outlet, Main bearing, Variable displacement hydraulic pump, Hydraulic drive motor, Hydraulic oil tank and more (9 in total).
Send us a drawing or sample and tell us the equipment model and part name.
Provide the equipment model, drawing for engineering review and quotation. If service life or wear is a concern, describe the operating conditions as well.
Or contact us directly: +86 156 3797 3199
zzx@anranst.com
ANRANST provides customers worldwide with engineering assessment, production at certified foundries to the customer technical requirements, quality control and finished-part delivery for custom wear parts and industrial spares, with scope to support other custom industrial parts.
We review mating surfaces and interface dimensions and assess material, heat treatment and manufacturing feasibility.
Material grades and heat-treatment processes are specified order by order, stated in the technical agreement and tracked through production.
Drawing confirmation, material and process control, production tracking, inspection and acceptance coordination.
We coordinate manufacturing, quality confirmation, packaging and delivery of complete finished parts in a workable, closed-loop supply process.
Provide the existing model, drawings, drawing, materials or operating conditions so we can identify the appropriate technical review and supply route.
Submit an Enquiry