2018 · 8 models
Select a model to jump to its component table; former and renamed designations are listed under “Historical names / renamings”.
| Model | Period | Components |
|---|---|---|
| Hyper-G 3P | 2018 | 6 |
| Hyper-G 3PDS | 2018 | 6 |
| Hyper-G 4P | 2018 | 6 |
| Hyper-G 4PDS | 2018 | 6 |
| Hyper-G 6P | 2018 | 6 |
| Hyper-G 6PDS | 2018 | 6 |
| Hyper-G Mud Cleaner | 2018 | 7 |
| Hyper-G Pro | 2018 | 4 |
The numbers on the diagram correspond one to one with the rows below.
| No. | Component | Location | Applies to |
|---|---|---|---|
| 1 | Composite screen panel | Exposed lower screen surface | Hyper-G 3P |
| 2 | Vibrating motor | Twin motors above screen basket | Hyper-G 3P |
| 3 | Isolation spring | Left-rear rubber isolator below basket | Hyper-G 3P |
| Component |
|---|
| Screen wedge |
| Screen seal |
| Side-discharge door |
| Hydrocyclone cone |
| Isolation valve |
| Pressure gauge |
| Discharge deflector |
Models with the same components are grouped together; select a group to open its component table.
Models: Hyper-G 3P, Hyper-G 3PDS, Hyper-G 4P, Hyper-G 4PDS, Hyper-G 6P, Hyper-G 6PDS
| No. | Component | Location |
|---|---|---|
| 1 | Composite screen panel | Vibrating screen deck |
| 2 | Vibrating Electric motor | Screen box exciter position |
| 3 | Isolation spring | Between the screen box and the base frame |
| Wedge clamp | Screen panel edge fixing position | |
| Screen plate seal | Joint between the screen panel and the screen box | |
| Side discharge door | Side discharge opening of the screen box |
| No. | Component | Location |
|---|---|---|
| 1 | Composite screen panel | Vibrating screen deck |
| Hydrocyclone cone | Cyclone separation unit | |
| Isolation valve | Feed pipelines of each hydrocyclone | |
| Pressure gauge | Feed manifold pressure monitoring point | |
| Discharge deflector | Discharge end at the bottom of the hydrocyclone | |
| Wedge clamp | Screen panel edge fixing position | |
| Screen plate seal | Joint between the screen panel and the screen box |
| No. | Component | Location |
|---|---|---|
| 1 | Composite screen panel | Vibrating screen deck |
| 2 | Vibrating Electric motor | Screen box exciter position |
| Wedge clamp | Screen panel edge fixing position | |
| Screen plate seal | Joint between the screen panel and the screen box |
The Hyper-G covers 8 models: Hyper-G 3P, Hyper-G 3PDS, Hyper-G 4P, Hyper-G 4PDS, Hyper-G 6P, Hyper-G 6PDS, Hyper-G Mud Cleaner, Hyper-G Pro. Former and renamed designations are listed in the models table on this page.
The Hyper-G is also documented under these designations: Hyper-G 3P, Hyper-G 3PDS, Hyper-G 4P, Hyper-G 4PDS, Hyper-G 6P, Hyper-G 6PDS, Hyper-G Mud Cleaner, Hyper-G Pro.
The Hyper-G is listed under the Elgin brand. Period: 2018. Status: Historical model.
10 components are recorded, including: Composite screen panel, Wedge clamp, Screen plate seal, Vibrating Electric motor, Isolation spring, Side discharge door, Hydrocyclone cone, Isolation valve and more. The full list with locations is in the components table on this page.
Model-specific components with their own page: Composite screen panel, Wedge clamp, Screen plate seal, Vibrating Electric motor, Isolation spring, Side discharge door, Hydrocyclone cone, Isolation valve and more (10 in total).
Send us a drawing or sample and tell us the equipment model and part name.
Provide the equipment model, drawing for engineering review and quotation. If service life or wear is a concern, describe the operating conditions as well.
Or contact us directly: +86 156 3797 3199
zzx@anranst.com
ANRANST provides customers worldwide with engineering assessment, production at certified foundries to the customer technical requirements, quality control and finished-part delivery for custom wear parts and industrial spares, with scope to support other custom industrial parts.
We review mating surfaces and interface dimensions and assess material, heat treatment and manufacturing feasibility.
Material grades and heat-treatment processes are specified order by order, stated in the technical agreement and tracked through production.
Drawing confirmation, material and process control, production tracking, inspection and acceptance coordination.
We coordinate manufacturing, quality confirmation, packaging and delivery of complete finished parts in a workable, closed-loop supply process.
Provide the existing model, drawings, drawing, materials or operating conditions so we can identify the appropriate technical review and supply route.
Submit an Enquiry