2018 · 11 models
Select a model to jump to its component table; former and renamed designations are listed under “Historical names / renamings”.
| Model | Period | Components |
|---|---|---|
| Apex 14FVFD | 2018 | 7 |
| Apex 14MVD-SL | 2018 | 7 |
| Apex 14MVD | 2018 | 6 |
| Apex 14MVFD | 2018 | 6 |
| Apex 16FVFD | 2018 | 7 |
| Apex 1842BD | 2018 | 7 |
| Apex 1850BD | 2018 | 7 |
| Apex 19FVFD | 2018 | 7 |
| Apex 2460BD | 2018 | 7 |
| Apex 25FVFD | 2018 | 7 |
| Apex 9FVFD | 2018 | 7 |
The numbers on the diagram correspond one to one with the rows below.
| No. | Component | Location | Applies to |
|---|---|---|---|
| 1 | Bowl | Exposed cylindrical bowl below the open cover | Apex 25FVFD |
| 2 | Liquid discharge port | Liquid-end discharge ports | Apex 25FVFD |
| 3 | Main bearing | Liquid-end pillow-block bearing | Apex 25FVFD |
| 4 | Main-drive motor | Motor outside the solids end | Apex 25FVFD |
| Component |
|---|
| Drive belt |
| Scroll conveyor |
| Solids discharge wear component |
| Planetary gearbox |
Models with the same components are grouped together; select a group to open its component table.
Models: Apex 14FVFD, Apex 14MVD-SL, Apex 16FVFD, Apex 1842BD, Apex 1850BD, Apex 19FVFD, Apex 2460BD, Apex 25FVFD, Apex 9FVFD
| No. | Component | Location |
|---|---|---|
| 1 | Rotating drum | Centrifugal separation working zone |
| 2 | Liquid outlet | Liquid-phase discharge end of the drum |
| 3 | Main bearing | Support positions at both ends of the drum |
| Drive belt | ||
| Screw conveyor | Conveying position inside the drum | |
| Solids outlet wear part | Solids discharge outlet of the drum | |
| Planetary gearbox | Differential drive end |
Models: Apex 14MVD, Apex 14MVFD
| No. | Component | Location |
|---|---|---|
| 1 | Rotating drum | Centrifugal separation working zone |
| 2 | Liquid outlet | Liquid-phase discharge end of the drum |
| 3 | Main bearing | Support positions at both ends of the drum |
| Screw conveyor | Conveying position inside the drum | |
| Solids outlet wear part | Solids discharge outlet of the drum | |
| Planetary gearbox | Differential drive end |
The Apex covers 11 models: Apex 14FVFD, Apex 14MVD-SL, Apex 14MVD, Apex 14MVFD, Apex 16FVFD, Apex 1842BD, Apex 1850BD, Apex 19FVFD, Apex 2460BD, Apex 25FVFD, Apex 9FVFD. Former and renamed designations are listed in the models table on this page.
The Apex is also documented under these designations: Apex 14FVFD, Apex 14MVD-SL, Apex 14MVD, Apex 14MVFD, Apex 16FVFD, Apex 1842BD, Apex 1850BD, Apex 19FVFD, Apex 2460BD, Apex 25FVFD, Apex 9FVFD.
The Apex is listed under the Elgin brand. Period: 2018. Status: Historical model.
7 components are recorded, including: Drive belt, Rotating drum, Screw conveyor, Solids outlet wear part, Liquid outlet, Main bearing, Planetary gearbox. The full list with locations is in the components table on this page.
Model-specific components with their own page: Rotating drum, Screw conveyor, Solids outlet wear part, Liquid outlet, Main bearing, Planetary gearbox (6 in total).
Send us a drawing or sample and tell us the equipment model and part name.
Provide the equipment model, drawing for engineering review and quotation. If service life or wear is a concern, describe the operating conditions as well.
Or contact us directly: +86 156 3797 3199
zzx@anranst.com
ANRANST provides customers worldwide with engineering assessment, production at certified foundries to the customer technical requirements, quality control and finished-part delivery for custom wear parts and industrial spares, with scope to support other custom industrial parts.
We review mating surfaces and interface dimensions and assess material, heat treatment and manufacturing feasibility.
Material grades and heat-treatment processes are specified order by order, stated in the technical agreement and tracked through production.
Drawing confirmation, material and process control, production tracking, inspection and acceptance coordination.
We coordinate manufacturing, quality confirmation, packaging and delivery of complete finished parts in a workable, closed-loop supply process.
Provide the existing model, drawings, drawing, materials or operating conditions so we can identify the appropriate technical review and supply route.
Submit an Enquiry