Wear slurry pump · 2023 · 7 models
Select a model to jump to its component table; former and renamed designations are listed under “Historical names / renamings”.
| Model | Historical names / renamings | Period | Components |
|---|---|---|---|
| DuroLast 43RB | 43RB | 2023 | 5 |
| DuroLast NE | 5 | ||
| DuroLast RB / NE 3×2 | 3×2 in | 2023 | 5 |
| DuroLast RB / NE 4×3 | 4×3 in | 2023 | 5 |
| DuroLast RB / NE 6×4 | 6×4 in | 2023 | 5 |
| DuroLast RB / NE 8×6 | 8×6 in | 2023 | 5 |
| DuroLast RB | 5 |
The numbers on the diagram correspond one to one with the rows below.
| No. | Component | Location | Applies to | |
|---|---|---|---|---|
| 1 |  | Pump liner | Front red liner in exploded view | OEM pictured configuration (exact model not specified) |
| 1 | Pump casing | Blue casing on left | DuroLast 43RB | |
| 2 | Impeller | Blue impeller between red liner halves | OEM pictured configuration (exact model not specified) | |
| 2 | Drive motor | Drive motor on right | DuroLast 43RB | |
| 3 | Split pump casing | Front blue split casing | OEM pictured configuration (exact model not specified) | |
| 3 | Coupling guard | Orange guard between pump and motor | DuroLast 43RB |
| Component |
|---|
| Mechanical seal |
| Coupling |
Models with the same components are grouped together; select a group to open its component table.
Models: DuroLast 43RB, DuroLast NE, DuroLast RB / NE 3×2, DuroLast RB / NE 4×3, DuroLast RB / NE 6×4, DuroLast RB / NE 8×6, DuroLast RB
| No. | Component | Location |
|---|---|---|
| 1 | Pump lining | Liquid working chamber inside the pump casing |
| 2 | Impeller | Pump working chamber |
| 3 | Split pump casing | Pump wet-end casing |
| Mechanical seal | Shaft exit point through the pump casing | |
| Coupling | Connection between the drive and the pump shaft |
The DuroLast RB / NE Wear slurry pump covers 7 models: DuroLast 43RB, DuroLast NE, DuroLast RB / NE 3×2, DuroLast RB / NE 4×3, DuroLast RB / NE 6×4, DuroLast RB / NE 8×6, DuroLast RB. Former and renamed designations are listed in the models table on this page.
The DuroLast RB / NE Wear slurry pump is also documented under these designations: DuroLast 43RB, 43RB, DuroLast NE, DuroLast RB / NE 3×2, 3×2 in, DuroLast RB / NE 4×3, 4×3 in, DuroLast RB / NE 6×4, 6×4 in, DuroLast RB / NE 8×6, 8×6 in, DuroLast RB.
The DuroLast RB / NE Wear slurry pump is listed under the Elgin brand as: Wear slurry pump. Period: 2023. Status: Historical model.
5 components are recorded, including: Pump lining, Impeller, Mechanical seal, Coupling, Split pump casing. The full list with locations is in the components table on this page.
Model-specific components with their own page: Pump lining, Impeller, Mechanical seal, Coupling, Split pump casing (5 in total).
Send us a drawing or sample and tell us the equipment model and part name.
Provide the equipment model, drawing for engineering review and quotation. If service life or wear is a concern, describe the operating conditions as well.
Or contact us directly: +86 156 3797 3199
zzx@anranst.com
ANRANST provides customers worldwide with engineering assessment, production at certified foundries to the customer technical requirements, quality control and finished-part delivery for custom wear parts and industrial spares, with scope to support other custom industrial parts.
We review mating surfaces and interface dimensions and assess material, heat treatment and manufacturing feasibility.
Material grades and heat-treatment processes are specified order by order, stated in the technical agreement and tracked through production.
Drawing confirmation, material and process control, production tracking, inspection and acceptance coordination.
We coordinate manufacturing, quality confirmation, packaging and delivery of complete finished parts in a workable, closed-loop supply process.
Provide the existing model, drawings, drawing, materials or operating conditions so we can identify the appropriate technical review and supply route.
Submit an Enquiry