Which models does the HSI cover?
The HSI covers 3 models: CRH1111R, CRH1113R, CRH5064. Former and renamed designations are listed in the models table on this page.
HSI
2026-10-03 · 3 models
Cedarapids
CedarapidsBrand
2026-10-03Period
Historical modelStatus
Cedarapids
Numbered Components
The numbers on the diagram correspond one to one with the rows below.
| No. | Component | Location | Applies to |
|---|---|---|---|
| 1 | Blow Bar | Periphery of the horizontal rotor | CRH5064 |
| 2 | First Apron Liner | Rotor-facing surface of the primary apron | CRH5064 |
| 3 | Rotor Assembly | Horizontal rotor in the lower crushing chamber | CRH5064 |
Other Components · 16 items
| Component | Part / drawing no. |
|---|---|
| Blow Bar | CW057-002-MA500 |
| Blow Bar | CW057-002-CR18 |
| Blow Bar | CW057-002-CR27 |
| Blow Bar | CW057-002-CR27T |
| Blow Bar | CW057-002-MAC |
| Blow Bar | CW057-002-CR18C |
| Blow Bar | CW057-002-CR27C |
| Blow Bar | CW057-002-HDC |
| Blow Bar | CW027-001-MA500 |
| Blow Bar | CW027-001-CR018 |
| Blow Bar | CW027-001-CR027 |
| Blow Bar | CW027-001-CR27TC |
| Blow Bar | CW027-001-MAC |
| Blow Bar | CW027-001-CR18C |
| Blow Bar | CW027-001-CR27C |
| Blow Bar | CW027-001-HDC |
Cedarapids
Components by Model
Models with the same components are grouped together; select a group to open its component table.
CRH1111R, CRH1113R, CRH50643 items
Models: CRH1111R, CRH1113R, CRH5064
| No. | Component | Location |
|---|---|---|
| 1 | Blow Bar | |
| 2 | First Apron Liner | |
| 3 | Rotor assembly | Center of the crushing chamber |
Frequently asked questions
What other names or designations is the HSI known by?
The HSI is also documented under these designations: CRH1111R, CRH1113R, CRH5064.
Which brand and type of equipment is the HSI?
The HSI is listed under the Cedarapids brand. Period: 2026-10-03. Status: Historical model.
Which components and wear parts are recorded for the HSI?
3 components are recorded, including: Blow Bar, First Apron Liner, Rotor assembly. The full list with locations is in the components table on this page.
How do I enquire about parts for the HSI?
Send us a drawing or sample and tell us the equipment model and part name.