Vibrating feeder · 2025 · 6 models
Select a model to jump to its component table; former and renamed designations are listed under “Historical names / renamings”.
| Model | Period | Components |
|---|---|---|
| VGF3517-12 Vibrating feeder | 2025 | 3 |
| VGF4217-12 Vibrating feeder | 2025 | 3 |
| VGF4220-15 Vibrating feeder | 2025 | 3 |
| VGF5220-15 Vibrating feeder | 2025 | 3 |
| VGF5224-19 Vibrating feeder | 2025 | 3 |
| VGF6020-15 Vibrating feeder | 2025 | 3 |
The numbers on the diagram correspond one to one with the rows below.
| No. | Component | Location |
|---|---|---|
| 1 | Grizzly Bars | Parallel grizzly bars at the discharge end |
| 2 | Feed Trough Plate | Pan floor liner at the feed end |
| 3 | Vibrator Bearing | In the vibrator bearing housing beneath the pan |
| 4 | Support Springs | Spring groups beneath the sides of the trough |
Models with the same components are grouped together; select a group to open its component table.
Models: VGF3517-12 Vibrating feeder, VGF4217-12 Vibrating feeder, VGF4220-15 Vibrating feeder, VGF5220-15 Vibrating feeder, VGF5224-19 Vibrating feeder, VGF6020-15 Vibrating feeder
| No. | Component | Location |
|---|---|---|
| 1 | Bar | Pre-screening area at the front of the feeder |
| 2 | Feed trough plate | Feeder trough surface |
| 3 | Exciter bearing | Vibration drive shaft support |
The Advantage Vibrating feeder covers 6 models: VGF3517-12 Vibrating feeder, VGF4217-12 Vibrating feeder, VGF4220-15 Vibrating feeder, VGF5220-15 Vibrating feeder, VGF5224-19 Vibrating feeder, VGF6020-15 Vibrating feeder. Former and renamed designations are listed in the models table on this page.
The Advantage Vibrating feeder is also documented under these designations: VGF3517-12 Vibrating feeder, VGF4217-12 Vibrating feeder, VGF4220-15 Vibrating feeder, VGF5220-15 Vibrating feeder, VGF5224-19 Vibrating feeder, VGF6020-15 Vibrating feeder.
The Advantage Vibrating feeder is listed under the Cedarapids brand as: Vibrating feeder. Period: 2025. Status: Historical model.
3 components are recorded, including: Bar, Feed trough plate, Exciter bearing. The full list with locations is in the components table on this page.
Model-specific components with their own page: Bar, Feed trough plate, Exciter bearing (3 in total).
Send us a drawing or sample and tell us the equipment model and part name.
Provide the equipment model, drawing for engineering review and quotation. If service life or wear is a concern, describe the operating conditions as well.
Or contact us directly: +86 156 3797 3199
zzx@anranst.com
ANRANST provides customers worldwide with engineering assessment, production at certified foundries to the customer technical requirements, quality control and finished-part delivery for custom wear parts and industrial spares, with scope to support other custom industrial parts.
We review mating surfaces and interface dimensions and assess material, heat treatment and manufacturing feasibility.
Material grades and heat-treatment processes are specified order by order, stated in the technical agreement and tracked through production.
Drawing confirmation, material and process control, production tracking, inspection and acceptance coordination.
We coordinate manufacturing, quality confirmation, packaging and delivery of complete finished parts in a workable, closed-loop supply process.
Provide the existing model, drawings, drawing, materials or operating conditions so we can identify the appropriate technical review and supply route.
Submit an Enquiry