Vibrating feeder · 2000 · 6 models
Select a model to jump to its component table; former and renamed designations are listed under “Historical names / renamings”.
| Model | Historical names / renamings | Period | Components |
|---|---|---|---|
| Schenck SLB | SLB; : 1300–1900 mm; 3000–5000 mm | 2000 | 4 |
| Schenck SLF | SLF; : 1300–3100 mm; 3600–9000 mm | 2000 | 4 |
| Schenck SLH | SLH; : 1600–4000 mm; 4750–10000 mm | 2000 | 4 |
| Schenck SLR | SLR; : 600–3100 mm; 2500–8000 mm | 2000 | 4 |
| Schenck Train Load-Out | TLO; Train Load-Out | 2026 | 3 |
| Schenck Mining Vibrating feeder | 2026 | 4 |
The numbers on the diagram correspond one to one with the rows below.
| No. | Component | Location | Applies to |
|---|---|---|---|
| 1 | Screen panel | Visible upper screening deck | Schenck SLF |
| 2 | Gearbox-type force exciter | Exciter on upper drive beam | Schenck SLF |
| 3 | Side plate | Bolted side plate on right of screen box | Schenck SLF |
| Component |
|---|
| Drive shaft |
| Isolation support |
| Feed trough |
| Wear liner |
| Exciter |
| Loading gate |
| Loading chute |
| Weighing system |
Models with the same components are grouped together; select a group to open its component table.
Models: Schenck SLB, Schenck SLF, Schenck SLH, Schenck SLR
| No. | Component |
|---|---|
| 1 | Screen plate |
| 2 | Model-specific component |
| Drive shaft | |
| Model-specific component |
| Component |
|---|
| Feed trough |
| Wear liner |
| Exciter |
| Model-specific component |
| Component | Location |
|---|---|
| Model-specific component | Bin discharge outlet |
| Model-specific component | |
| Model-specific component |
The Schenck Vibrating feeder covers 6 models: Schenck SLB, Schenck SLF, Schenck SLH, Schenck SLR, Schenck Train Load-Out, Schenck Mining Vibrating feeder. Former and renamed designations are listed in the models table on this page.
The Schenck Vibrating feeder is also documented under these designations: Schenck SLB, SLB;: 1300–1900 mm; 3000–5000 mm, Schenck SLF, SLF;: 1300–3100 mm; 3600–9000 mm, Schenck SLH, SLH;: 1600–4000 mm; 4750–10000 mm, Schenck SLR, SLR;: 600–3100 mm; 2500–8000 mm, Schenck Train Load-Out, TLO, Train Load-Out, Schenck Mining Vibrating feeder.
The Schenck Vibrating feeder is listed under the SP Mining brand as: Vibrating feeder. Period: 2000. Status: Historical model.
10 components are recorded, including: Screen plate, Drive shaft, Feed trough, Wear liner, Exciter and more. The full list with locations is in the components table on this page.
Send us a drawing or sample and tell us the equipment model and part name.
Provide the equipment model, drawing for engineering review and quotation. If service life or wear is a concern, describe the operating conditions as well.
Or contact us directly: +86 156 3797 3199
zzx@anranst.com
ANRANST provides customers worldwide with engineering assessment, production at certified foundries to the customer technical requirements, quality control and finished-part delivery for custom wear parts and industrial spares, with scope to support other custom industrial parts.
We review mating surfaces and interface dimensions and assess material, heat treatment and manufacturing feasibility.
Material grades and heat-treatment processes are specified order by order, stated in the technical agreement and tracked through production.
Drawing confirmation, material and process control, production tracking, inspection and acceptance coordination.
We coordinate manufacturing, quality confirmation, packaging and delivery of complete finished parts in a workable, closed-loop supply process.
Provide the existing model, drawings, drawing, materials or operating conditions so we can identify the appropriate technical review and supply route.
Submit an Enquiry