HIGmill Custom Structural Spares
المقسم أجسام المطحنة و الأجزاء الهيكلية
Split Mill Body and Structural Components
HIGmill uses a flanged split body to reduce maintenance space requirements. This page covers drawing review, manufacturing quality control and finished-part delivery for body sections, flanges, stator and liner interfaces, supports and connections.
المعدات Metso / Swiss Tower Mills HIGmill
موقع التركيب Vertical grinding chamber, flanged sections and support connections
Main requirements Pressure resistance, stiffness, coaxiality, weld integrity and sealing reliability
متطلبات التحديد Model, mill body general arrangement, section drawings and stator/liner interfaces
Structural scopeIndividual Part Body sections, flange rings, supports or interface parts Assembly configuration Split body with stator and liner mounting system Key accuracy requirements Diameter, roundness, coaxiality, flanges and hole patterns Quality priorities Materials, welding, NDT, dimensions and pressure/leak tests
The mill body requires more than a rolled and welded shell
The body must meet grinding chamber geometry, stator and liner mounting, flanged section, support, feed and discharge, maintenance and sealing requirements. Manufacture requires a complete general arrangement, interfaces and acceptance criteria, not outside diameter and height alone.
Identify the complete body, individual sections, flange rings, supports, interface mounts and connecting parts separately for each project. When surveying used parts, distinguish design dimensions from welding distortion and service wear.
Structural zones
Control sections, flanges and internal interfaces separately
Define all datums in the manufacturing drawings and inspection plan.
Body sections and flanges
Control rolled-section roundness, flange flatness, hole-pattern positions, section interchangeability and site assembly clearances.
Stator and liner interfaces
Control mounting datums, fastening holes, local reinforcement, curvature and coaxial alignment of adjoining grinding stages.
Support and nozzle structures
Check load paths, welds, reinforcing plates, feed and discharge interfaces, maintenance and lifting requirements.
المواد والعمليات
Coordinate steel plate, welding and nondestructive inspection
The drawings and technical agreement govern steel grade, plate thickness, welding consumables, preheat, post-weld heat treatment and inspection coverage.
Structural and Quenched and Tempered Steel Plate Select materials for pressure resistance, weldability, low-temperature toughness, thickness and interface loads. A wear plate designation does not replace structural calculations. Welding and Repair Processes Control joint preparation, welding consumables, preheat, interpass temperature, distortion, post-weld treatment and inspection requirements such as UT/MT/PT.
Models and drawing references
Mill bodies vary with volume and diameter
The equipment series name is insufficient to identify body sections and interfaces.
| HIGmill Model | Key identification details | Drawing Number / Part Number |
|---|---|---|
| HIG3500/23000 | 23,000 L mill body; check sections, stator stage count, supports and nozzles | Confirm against the serial number, mill body general arrangement and section drawings |
| HIG500/4000 | 4,000 L mill body; check diameter, flanges, hole patterns and site layout | Confirm against the serial number, mill body general arrangement and section drawings |
| HIG25 / HIG5 | Test equipment; construction differs from industrial mill bodies | Confirm against the nameplate and test equipment drawings |
| Other industrial HIGmill models | Provide chamber volume, diameter, general arrangement, interfaces and maintenance revision | Record OEM drawing references, third-party references and drawing revisions |
Match third-party mill body drawing references to the equipment serial number, volume, diameter, sections, material, welding class and drawing revision.
RFQ information
Mill body and structural part identification information
Start with the general arrangement drawing and site measurements where necessary so engineers can determine the manufacturing details required.
تحديد المعدات
OEM, model, serial number, volume and nameplate.
نطاق التوريد
Complete mill body, individual section, flange, support or interface part.
General arrangement and interfaces
Diameter, height, sections, flanges, hole patterns, nozzles and supports.
Internal assembly
Stator rings, liners, fasteners and grinding-stage datums.
Materials and welding
Steel plate, welding consumables, procedure qualification, heat treatment and inspection requirements.
Site condition
Deformation, cracks, corrosion, leaks and repair history.
الأجزاء والمعدات ذات الصلة
المعدات, liners and structural manufacturing
Check the mill body and internal wear system against the same assembly datums.
Request a HIGmill Body and Structural Parts Quotation
Provide the model, general arrangement, section drawings, interfaces, materials, welding and inspection requirements.
خدمات صنع في الصين
من التقييم الفني إلى تسليم المنتج بالكامل
توفر شركة ANRANST للعملاء العالميين تقييمات هندسية، واختيار التصنيع الصيني، ومراقبة الجودة، وتسليم الأجزاء النهائية لقطع الغيار الصناعية المقاومة للتآكل حسب الطلب، ويمكنها أيضًا دعم قطع الغيار الصناعية الأخرى حسب الطلب.
مراجعة الرسومات والهندسة
قم بمراجعة أسطح التزاوج وأبعاد الواجهة، وقم بتقييم جدوى المواد والمعالجة الحرارية والتصنيع.
تحديد المادة والمعالجة الحرارية
تُحدَّد درجات المواد وعمليات المعالجة الحرارية لكل طلب على حدة، وتُثبَّت في الاتفاقية الفنية وتُتابَع أثناء الإنتاج.
ضبط الجودة
يشمل ذلك تأكيد الرسم، ومراقبة المواد والعمليات، وتتبع الإنتاج، وتنسيق عمليات الفحص والقبول.
تسليم المنتج النهائي
تنظيم عمليات التصنيع والتحقق من الجودة والتعبئة والتغليف وتسليم المنتجات النهائية الكاملة لتشكيل حلقة إمداد قابلة للتنفيذ.
قم بتزويدنا بالنماذج الحالية، والرسومات، وأرقام الرسومات، وأرقام الأجزاء، والمواد، أو معلومات ظروف التشغيل، وسنقوم بتحديد التحقق الفني ومسار التوريد وفقًا لذلك.
إرسال طلب