Rotary dryer · 2026 · 9 models
Select a model to jump to its component table; former and renamed designations are listed under “Historical names / renamings”.
| Model | Historical names / renamings | Period | Components |
|---|---|---|---|
| БС 1,2 rotary dryer | БС 1,2; 4000 / 6000 / 8000 / 12000 mm | 2026 | 5 |
| БС 1.6.10 / БС 1.6.16 rotary dryer | БС 1.6.10; БС 1.6.16; 1,6×10; 1,6×16 | 2026 | 6 |
| 3,2×22 m rotary dryer | 3,2×22 | 2026 | 5 |
| 3,5×27 m rotary dryer | 3,5×27 | 2026 | 6 |
| СМЦ 428.3М / 2,8×20 m rotary dryer | СМЦ 428.3М; 2,8×20 | 2026 | 6 |
| СМЦ 429.3М / 2,8×14 m rotary dryer | СМЦ 429.3М; 2,8×14 | 2026 | 5 |
| СМЦ 440.3М / 2,2×14 m rotary dryer | СМЦ 440.3М; 2,2×14 | 2026 | 5 |
| СМЦ 69 / 2,8×14 m rotary dryer | СМЦ 69; 2,8×14 | 2026 | 7 |
| СМЖ 855.80 / 1,6×8 m rotary dryer | СМЖ 855.80 | 2026 | 5 |
The numbers on the diagram correspond one to one with the rows below.
| No. | Component | Location | Applies to |
|---|---|---|---|
| 1 | Dryer shell | Outer wall of the rotary drying drum | Model not specified (OEM rotary dryer family view) |
| 2 | Tyre | Front support ring around the drum | Model not specified (OEM rotary dryer family view) |
| 3 | Support roller | Beneath the front tyre | Model not specified (OEM rotary dryer family view) |
| 4 | Lifter | Lifting region inside the cutaway drum | Model not specified (OEM rotary dryer family view) |
| 5 | Ring gear | Drive ring around the middle of the drum | Model not specified (OEM rotary dryer family view) |
| Component |
|---|
| Thrust rollers |
| End seals |
| Heat exchange tubes |
Models with the same components are grouped together; select a group to open its component table.
Models: БС 1,2 rotary dryer, 3,2×22 m rotary dryer, СМЦ 429.3М / 2,8×14 m rotary dryer, СМЦ 440.3М / 2,2×14 m rotary dryer, СМЖ 855.80 / 1,6×8 m rotary dryer
| No. | Component |
|---|---|
| 1 | Dryer Shell |
| 2 | Tyre |
| 3 | Model-specific component |
| 5 | Ring gear |
| Model-specific component |
Models: БС 1.6.10 / БС 1.6.16 rotary dryer, 3,5×27 m rotary dryer, СМЦ 428.3М / 2,8×20 m rotary dryer
| No. | Component |
|---|---|
| 1 | Dryer Shell |
| 2 | Tyre |
| 3 | Model-specific component |
| 4 | Model-specific component |
| 5 | Ring gear |
| Model-specific component |
| No. | Component |
|---|---|
| 1 | Dryer Shell |
| 2 | Tyre |
| 3 | Model-specific component |
| 5 | Ring gear |
| Model-specific component | |
| End seal | |
| Model-specific component |
The БС / СМЦ / СМЖ Rotary dryer covers 9 models: БС 1,2 rotary dryer, БС 1.6.10 / БС 1.6.16 rotary dryer, 3,2×22 m rotary dryer, 3,5×27 m rotary dryer, СМЦ 428.3М / 2,8×20 m rotary dryer, СМЦ 429.3М / 2,8×14 m rotary dryer, СМЦ 440.3М / 2,2×14 m rotary dryer, СМЦ 69 / 2,8×14 m rotary dryer, СМЖ 855.80 / 1,6×8 m rotary dryer. Former and renamed designations are listed in the models table on this page.
The БС / СМЦ / СМЖ Rotary dryer is also documented under these designations: БС 1,2 rotary dryer, БС 1,2; 4000 / 6000 / 8000 / 12000 mm, БС 1.6.10 / БС 1.6.16 rotary dryer, БС 1.6.10, БС 1.6.16, 1,6×10, 1,6×16, 3,2×22 m rotary dryer, 3,2×22, 3,5×27 m rotary dryer, 3,5×27, СМЦ 428.3М / 2,8×20 m rotary dryer, СМЦ 428.3М, 2,8×20.
The БС / СМЦ / СМЖ Rotary dryer is listed under the Strommashina brand as: Rotary dryer. Period: 2026. Status: Historical model.
8 components are recorded, including: Dryer Shell, Tyre, Ring gear, End seal and more. The full list with locations is in the components table on this page.
Send us a drawing or sample and tell us the equipment model and part name.
Provide the equipment model, drawing for engineering review and quotation. If service life or wear is a concern, describe the operating conditions as well.
Or contact us directly: +86 156 3797 3199
zzx@anranst.com
ANRANST provides customers worldwide with engineering assessment, production at certified foundries to the customer technical requirements, quality control and finished-part delivery for custom wear parts and industrial spares, with scope to support other custom industrial parts.
We review mating surfaces and interface dimensions and assess material, heat treatment and manufacturing feasibility.
Material grades and heat-treatment processes are specified order by order, stated in the technical agreement and tracked through production.
Drawing confirmation, material and process control, production tracking, inspection and acceptance coordination.
We coordinate manufacturing, quality confirmation, packaging and delivery of complete finished parts in a workable, closed-loop supply process.
Provide the existing model, drawings, drawing, materials or operating conditions so we can identify the appropriate technical review and supply route.
Submit an Enquiry