Vertical trough Pump · 2022—2025 · 8 models
Select a model to jump to its component table; former and renamed designations are listed under “Historical names / renamings”.
| Model | Historical names / renamings | Period | Components |
|---|---|---|---|
| Sala VT100 | VT 100 | 2022—2025 | 10 |
| Sala VT150 | VT 150 | 2022—2025 | 10 |
| Sala VT200 | VT 200 | 2022—2025 | 10 |
| Sala VT250 | VT 250 | 2022—2025 | 10 |
| Sala VT40 laboratory type | VT40 1.5 lab | 2022—2025 | 10 |
| Sala VT40 | VT 40 | 2022—2025 | 10 |
| Sala VT50 | VT 50 | 2022—2025 | 10 |
| Sala VT80 | VT 80 | 2022—2025 | 10 |
The numbers on the diagram correspond one to one with the rows below.
| No. | Component | Location | Applies to |
|---|---|---|---|
| 1 | Impeller | Inside the wet-end casing at the lower end of the pump shaft | VT50 |
| 2 | Pump casing | Wet-end casing surrounding the impeller | VT50 |
| 3 | Pump shaft | Between the upper bearing assembly and lower impeller | VT50 |
| 4 | Bearing assembly | Inside the bearing housing above the liquid level | VT50 |
| 5 | Bearing housing | Upper support housing for the pump shaft | VT50 |
| 6 | V-belt drive | Between the motor and pump shaft at the top of the pump | VT50 |
| 7 | Pump trough | Open feed trough above the VT wet end | VT50 |
| 8 | Casing support beam | Opening support structure below the pump casing | VT50 |
| 9 | Drive guard | External guard around the upper belt drive | VT50 |
| Component |
|---|
| Motor adjustment plate |
Models with the same components are grouped together; select a group to open its component table.
Models: Sala VT100, Sala VT150, Sala VT200, Sala VT250, Sala VT40 laboratory type, Sala VT40, Sala VT50, Sala VT80
| No. | Component |
|---|---|
| 1 | Impeller |
| 2 | Pump casing |
| 3 | Pump shaft |
| 4 | Bearing Assembly |
| 5 | Bearing housing |
| 6 | Model-specific component |
| 7 | Pump trough |
| 8 | Model-specific component |
| 9 | Drive guard |
| Electric motor adjusting plate |
The VT Vertical trough Pump covers 8 models: Sala VT100, Sala VT150, Sala VT200, Sala VT250, Sala VT40 laboratory type, Sala VT40, Sala VT50, Sala VT80. Former and renamed designations are listed in the models table on this page.
The VT Vertical trough Pump is also documented under these designations: Sala VT100, VT 100, Sala VT150, VT 150, Sala VT200, VT 200, Sala VT250, VT 250, Sala VT40 laboratory type, VT40 1.5 lab, Sala VT40, VT 40, Sala VT50, VT 50.
The VT Vertical trough Pump is listed under the Sala brand as: Vertical trough Pump. Period: 2022—2025. Status: Historical model.
10 components are recorded, including: Impeller, Pump casing, Pump shaft, Bearing Assembly, Bearing housing, Pump trough, Electric motor adjusting plate, Drive guard and more. The full list with locations is in the components table on this page.
Send us a drawing or sample and tell us the equipment model and part name.
Provide the equipment model, drawing for engineering review and quotation. If service life or wear is a concern, describe the operating conditions as well.
Or contact us directly: +86 156 3797 3199
zzx@anranst.com
ANRANST provides customers worldwide with engineering assessment, production at certified foundries to the customer technical requirements, quality control and finished-part delivery for custom wear parts and industrial spares, with scope to support other custom industrial parts.
We review mating surfaces and interface dimensions and assess material, heat treatment and manufacturing feasibility.
Material grades and heat-treatment processes are specified order by order, stated in the technical agreement and tracked through production.
Drawing confirmation, material and process control, production tracking, inspection and acceptance coordination.
We coordinate manufacturing, quality confirmation, packaging and delivery of complete finished parts in a workable, closed-loop supply process.
Provide the existing model, drawings, drawing, materials or operating conditions so we can identify the appropriate technical review and supply route.
Submit an Enquiry