Mobile Jaw crusher · 2010 4 · 5 models
Select a model to jump to its component table; former and renamed designations are listed under “Historical names / renamings”.
| Model | Historical names / renamings | Period | Components |
|---|---|---|---|
| Powerscreen Pegson Metrotrak HA | Metrotrak HA | 2010 4 | 6 |
| Metrotrak | 8 | ||
| Powerscreen Pegson XA400S | XA400S; X400S | 2010 4 | 4 |
| Powerscreen Pegson XA750 | XA750 | 2010 4 | 7 |
| Powerscreen Pegson XR400S | XR400S; X400S | 2010 4 | 4 |
The numbers on the diagram correspond one to one with the rows below.
| No. | Component | Location | Applies to |
|---|---|---|---|
| 1 | Feed hopper | Hopper at the upper left rear | Pegson Metrotrak / Metrotrak HA OEM 2010 representative unit |
| 2 | Conveyor belt | Main product belt at the right front | Pegson Metrotrak / Metrotrak HA OEM 2010 representative unit |
| 3 | Track assembly | Tracks below the chassis | Pegson Metrotrak / Metrotrak HA OEM 2010 representative unit |
| Component |
|---|
| Fixed jaw plate |
| Swing jaw plate |
| Hopper wear liners |
| Grizzly bars |
| Feeder |
Models with the same components are grouped together; select a group to open its component table.
Models: Powerscreen Pegson XA400S, Powerscreen Pegson XR400S
| No. | Component |
|---|---|
| 1 | Hopper |
| 2 | Conveyor belt |
| Model-specific component | |
| Swing jaw plate |
| No. | Component | Location |
|---|---|---|
| 1 | Hopper | |
| 2 | Conveyor belt | |
| 3 | Track assembly | |
| Model-specific component | ||
| Swing jaw plate | ||
| Model-specific component | ||
| Model-specific component | ||
| Feeder | Between the hopper and the crushing chamber or screen box |
| No. | Component | Location |
|---|---|---|
| 1 | Hopper | |
| 2 | Conveyor belt | |
| 3 | Track assembly | |
| Model-specific component | ||
| Swing jaw plate | ||
| Model-specific component | ||
| Feeder | Between the hopper and the crushing chamber or screen box |
| No. | Component | Location |
|---|---|---|
| 1 | Hopper | |
| 2 | Conveyor belt | |
| Model-specific component | ||
| Swing jaw plate | ||
| Model-specific component | ||
| Feeder | Between the hopper and the crushing chamber or screen box |
The Mobile Jaw crusher covers 5 models: Powerscreen Pegson Metrotrak HA, Metrotrak, Powerscreen Pegson XA400S, Powerscreen Pegson XA750, Powerscreen Pegson XR400S. Former and renamed designations are listed in the models table on this page.
The Mobile Jaw crusher is also documented under these designations: Powerscreen Pegson Metrotrak HA, Metrotrak HA, Metrotrak, Powerscreen Pegson XA400S, XA400S, X400S, Powerscreen Pegson XA750, XA750, Powerscreen Pegson XR400S, XR400S.
The Mobile Jaw crusher is listed under the Powerscreen brand as: Mobile Jaw crusher. Period: 2010 4. Status: Historical model.
8 components are recorded, including: Swing jaw plate, Hopper, Conveyor belt, Track assembly, Feeder and more. The full list with locations is in the components table on this page.
Model-specific components with their own page: Feeder (1 in total).
Send us a drawing or sample and tell us the equipment model and part name.
Provide the equipment model, drawing for engineering review and quotation. If service life or wear is a concern, describe the operating conditions as well.
Or contact us directly: +86 156 3797 3199
zzx@anranst.com
ANRANST provides customers worldwide with engineering assessment, production at certified foundries to the customer technical requirements, quality control and finished-part delivery for custom wear parts and industrial spares, with scope to support other custom industrial parts.
We review mating surfaces and interface dimensions and assess material, heat treatment and manufacturing feasibility.
Material grades and heat-treatment processes are specified order by order, stated in the technical agreement and tracked through production.
Drawing confirmation, material and process control, production tracking, inspection and acceptance coordination.
We coordinate manufacturing, quality confirmation, packaging and delivery of complete finished parts in a workable, closed-loop supply process.
Provide the existing model, drawings, drawing, materials or operating conditions so we can identify the appropriate technical review and supply route.
Submit an Enquiry