Mobile Cone crusher · 2010 4 · 6 models
Select a model to jump to its component table; former and renamed designations are listed under “Historical names / renamings”.
| Model | Historical names / renamings | Period | Components |
|---|---|---|---|
| 1000 Maxtrak | 6 | ||
| 1150 Maxtrak | 1150 Maxtrak Pre-Screen | 5 | |
| Powerscreen Pegson 1300 Maxtrak | 1300 Maxtrak | 2010 4 | 4 |
| 1400 Maxtrak | 2024 | 4 | |
| 1500 Maxtrak | Maxtrak 1500; Powerscreen Pegson 1500 Maxtrak | 2010 | 5 |
| Maxtrak 1010 Volt | 6 |
The numbers on the diagram correspond one to one with the rows below.
| No. | Component | Location | Applies to |
|---|---|---|---|
| 1 | Feed hopper | Feed hopper at the upper right rear | 1000 Maxtrak |
| 2 | Conveyor belt | Main discharge belt at the left front | 1000 Maxtrak |
| 3 | Track assembly | Track assembly beneath the centre of the chassis | 1000 Maxtrak |
| Component |
|---|
| Mantle |
| Bowl liner / concave |
| Post-screen media |
| Feeder |
Models with the same components are grouped together; select a group to open its component table.
Models: 1150 Maxtrak, 1500 Maxtrak
| No. | Component |
|---|---|
| 1 | Hopper |
| 2 | Conveyor belt |
| 3 | Track assembly |
| Mantle | |
| Concave |
Models: Powerscreen Pegson 1300 Maxtrak, 1400 Maxtrak
| No. | Component |
|---|---|
| 1 | Hopper |
| 2 | Conveyor belt |
| Mantle | |
| Concave |
| No. | Component |
|---|---|
| 1 | Hopper |
| 2 | Conveyor belt |
| 3 | Track assembly |
| Mantle | |
| Concave | |
| Model-specific component |
| No. | Component | Location |
|---|---|---|
| 1 | Hopper | |
| 2 | Conveyor belt | |
| 3 | Track assembly | |
| Mantle | ||
| Concave | ||
| Feeder | Between the hopper and the crushing chamber or screen box |
The Maxtrak Mobile Cone crusher covers 6 models: 1000 Maxtrak, 1150 Maxtrak, Powerscreen Pegson 1300 Maxtrak, 1400 Maxtrak, 1500 Maxtrak, Maxtrak 1010 Volt. Former and renamed designations are listed in the models table on this page.
The Maxtrak Mobile Cone crusher is also documented under these designations: 1000 Maxtrak, 1150 Maxtrak, 1150 Maxtrak Pre-Screen, Powerscreen Pegson 1300 Maxtrak, 1300 Maxtrak, 1400 Maxtrak, 1500 Maxtrak, Maxtrak 1500, Powerscreen Pegson 1500 Maxtrak, Maxtrak 1010 Volt.
The Maxtrak Mobile Cone crusher is listed under the Powerscreen brand as: Mobile Cone crusher. Period: 2010 4. Status: Historical model.
7 components are recorded, including: Mantle, Concave, Hopper, Conveyor belt, Track assembly, Feeder and more. The full list with locations is in the components table on this page.
Model-specific components with their own page: Feeder (1 in total).
Send us a drawing or sample and tell us the equipment model and part name.
Provide the equipment model, drawing for engineering review and quotation. If service life or wear is a concern, describe the operating conditions as well.
Or contact us directly: +86 156 3797 3199
zzx@anranst.com
ANRANST provides customers worldwide with engineering assessment, production at certified foundries to the customer technical requirements, quality control and finished-part delivery for custom wear parts and industrial spares, with scope to support other custom industrial parts.
We review mating surfaces and interface dimensions and assess material, heat treatment and manufacturing feasibility.
Material grades and heat-treatment processes are specified order by order, stated in the technical agreement and tracked through production.
Drawing confirmation, material and process control, production tracking, inspection and acceptance coordination.
We coordinate manufacturing, quality confirmation, packaging and delivery of complete finished parts in a workable, closed-loop supply process.
Provide the existing model, drawings, drawing, materials or operating conditions so we can identify the appropriate technical review and supply route.
Submit an Enquiry