Flotation machine · 1997 · 1 model
Select a model to jump to its component table; former and renamed designations are listed under “Historical names / renamings”.
| Model | Historical names / renamings | Period | Components |
|---|---|---|---|
| OK-TC/TankCell Flotation machine | OK-5-TC; OK-10-TC; OK-20-TC; OK-30-TC; OK-40-TC; OK-50-TC; OK-70-TC; OK-100-TC; OK-130-TC; OK-TC-XHD; TankCell 160 (1997); TankCell 200; TankCell 300 | 1997 | 3 |
The numbers on the diagram correspond one to one with the rows below.
| No. | Component | Location | Applies to |
|---|---|---|---|
| 1 | Mixing mechanism | Rotor-stator assembly at the bottom center | TankCell (pictured FloatForce configuration) |
| 2 | Internal froth launder | Radial launder at the upper inside edge | TankCell (pictured FloatForce configuration) |
| 3 | Froth crowder cone | Around the shaft in the upper tank | TankCell (pictured FloatForce configuration) |
| 4 | Impeller | Rotating rotor above the stator at the tank bottom | TankCell (pictured FloatForce configuration) |
| 5 | Stator | Stationary cage surrounding the rotor | TankCell (pictured FloatForce configuration) |
| 6 | Shaft assembly | Between the upper platform and rotor | TankCell (pictured FloatForce configuration) |
Models with the same components are grouped together; select a group to open its component table.
| No. | Component |
|---|---|
| 1 | Model-specific component |
| 2 | Model-specific component |
| 3 | Model-specific component |
The OK-TC/TankCell Flotation machine is also documented under these designations: OK-5-TC, OK-10-TC, OK-20-TC, OK-30-TC, OK-40-TC, OK-50-TC, OK-70-TC, OK-100-TC, OK-130-TC, OK-TC-XHD, TankCell 160, TankCell 200, TankCell 300.
The OK-TC/TankCell Flotation machine is listed under the Outokumpu brand as: Flotation machine. Period: 1997. Status: Historical model.
Send us a drawing or sample and tell us the equipment model and part name.
Provide the equipment model, drawing for engineering review and quotation. If service life or wear is a concern, describe the operating conditions as well.
Or contact us directly: +86 156 3797 3199
zzx@anranst.com
ANRANST provides customers worldwide with engineering assessment, production at certified foundries to the customer technical requirements, quality control and finished-part delivery for custom wear parts and industrial spares, with scope to support other custom industrial parts.
We review mating surfaces and interface dimensions and assess material, heat treatment and manufacturing feasibility.
Material grades and heat-treatment processes are specified order by order, stated in the technical agreement and tracked through production.
Drawing confirmation, material and process control, production tracking, inspection and acceptance coordination.
We coordinate manufacturing, quality confirmation, packaging and delivery of complete finished parts in a workable, closed-loop supply process.
Provide the existing model, drawings, drawing, materials or operating conditions so we can identify the appropriate technical review and supply route.
Submit an Enquiry