25 models
Select a model to jump to its component table; former and renamed designations are listed under “Historical names / renamings”.
The numbers on the diagram correspond one to one with the rows below.
| No. | Component | Location | Applies to |
|---|---|---|---|
| 1 | Mounting base | Ground support base | ЭШ-11/70 |
| 2 | Roller circle | Under the revolving platform | ЭШ-11/70 |
| 3 | Slewing ring gear | Between platform and base | ЭШ-11/70 |
| 4 | Center trunnion | Center of the revolving platform | ЭШ-11/70 |
| 5 | Walking mechanism | At the sides of the base | ЭШ-11/70 |
| 6 | Slewing mechanism | Platform drive | ЭШ-11/70 |
| 7 | Fairlead sheaves | Drag-rope fairlead | ЭШ-11/70 |
| 8 | Support sheaves | Front rope support | ЭШ-11/70 |
| 9 | Drag ropes | From drag winch to bucket | ЭШ-11/70 |
| 10 | Bucket | Digging end | ЭШ-11/70 |
| 11 | Hoist ropes | From boom tip to bucket | ЭШ-11/70 |
| 12 | Boom-point sheaves | At the boom tip | ЭШ-11/70 |
| 13 | Boom | Upper working structure | ЭШ-11/70 |
| 14 | Boom suspension ropes | Stay ropes above the boom | ЭШ-11/70 |
| 15 | Cab | Operator cab | ЭШ-11/70 |
| 16 | Boom hoist winch | Boom raising drive | ЭШ-11/70 |
| 17 | Body enclosure | Upper body enclosure | ЭШ-11/70 |
| 18 | Crane rails | Crane rails inside the body | ЭШ-11/70 |
| 19 | Hoist winch | On the revolving platform | ЭШ-11/70 |
| 20 | Drag winch | On the revolving platform | ЭШ-11/70 |
| 21 | Superstructure | Structure above the platform | ЭШ-11/70 |
| 22 | Revolving platform | Platform supporting upper machinery | ЭШ-11/70 |
| 23 | Main converting unit | Rear of the upper machinery platform | ЭШ-11/70 |
| 24 | Control cabinets | Electrical control area inside the enclosure | ЭШ-11/70 |
Models with the same components are grouped together; select a group to open its component table.
Models: ЭШ-1, ЭШ-10 / 100, ЭШ-10 / 50, ЭШ-10 / 60, ЭШ-10 / 70, ЭШ-10 / 70А, ЭШ-11-70-У, ЭШ-11 / 70, ЭШ-13 / 50, ЭШ-14-50-У, ЭШ-14 / 50, ЭШ-15 / 80, ЭШ-15 / 90, ЭШ-15-90Н, ЭШ-20 / 65, ЭШ-20 / 90, ЭШ-20-90Н, ЭШ-4 / 40, ЭШ-5 / 45, ЭШ-6 / 45, ЭШ-6 / 60, ЭШ-6,5-45-М-У, ЭШ-6,5-45-М, ЭШ-6,5 / 45, ЭШ-8 / 60
| No. | Component |
|---|---|
| 2 | Model-specific component |
| 3 | Rotary Ring gear |
| 4 | Model-specific component |
| 7 | Model-specific component |
| 9 | Model-specific component |
| 10 | Bucket |
| 11 | Model-specific component |
| 13 | Model-specific component |
The Walking draglines covers 25 models: ЭШ-1, ЭШ-10 / 100, ЭШ-10 / 50, ЭШ-10 / 60, ЭШ-10 / 70, ЭШ-10 / 70А, ЭШ-11-70-У, ЭШ-11 / 70, ЭШ-13 / 50, ЭШ-14-50-У, ЭШ-14 / 50, ЭШ-15 / 80, ЭШ-15 / 90, ЭШ-15-90Н, ЭШ-20 / 65, ЭШ-20 / 90, ЭШ-20-90Н, ЭШ-4 / 40, ЭШ-5 / 45, ЭШ-6 / 45, ЭШ-6 / 60, ЭШ-6,5-45-М-У, ЭШ-6,5-45-М, ЭШ-6,5 / 45, ЭШ-8 / 60. Former and renamed designations are listed in the models table on this page.
The Walking draglines is also documented under these designations: ЭШ-1, ЭШ-10 / 100, ЭШ-10 / 50, ЭШ-10 / 60, ЭШ-10 / 70, ЭШ-10 / 70А, ЭШ-11-70-У, ЭШ-11 / 70, ЭШ-13 / 50, ЭШ-14-50-У, ЭШ-14 / 50, ЭШ-15 / 80, ЭШ-15 / 90, ЭШ-15-90Н.
The Walking draglines is listed under the NKMZ brand. Status: Historical model.
8 components are recorded, including: Bucket, Rotary Ring gear and more. The full list with locations is in the components table on this page.
Send us a drawing or sample and tell us the equipment model and part name.
Provide the equipment model, drawing for engineering review and quotation. If service life or wear is a concern, describe the operating conditions as well.
Or contact us directly: +86 156 3797 3199
zzx@anranst.com
ANRANST provides customers worldwide with engineering assessment, production at certified foundries to the customer technical requirements, quality control and finished-part delivery for custom wear parts and industrial spares, with scope to support other custom industrial parts.
We review mating surfaces and interface dimensions and assess material, heat treatment and manufacturing feasibility.
Material grades and heat-treatment processes are specified order by order, stated in the technical agreement and tracked through production.
Drawing confirmation, material and process control, production tracking, inspection and acceptance coordination.
We coordinate manufacturing, quality confirmation, packaging and delivery of complete finished parts in a workable, closed-loop supply process.
Provide the existing model, drawings, drawing, materials or operating conditions so we can identify the appropriate technical review and supply route.
Submit an Enquiry