Rail-mounted travelling grab ship unloader · 1993-12-13 · 2 models
Select a model to jump to its component table; former and renamed designations are listed under “Historical names / renamings”.
| Model | Historical names / renamings | Period | Components |
|---|---|---|---|
| McNally Wellman Pagbilao travelling grab ship unloader (original-preview candidate) | Hopewell Pagbilao Clamshell Ship Unloader | 1993-12-13 | 32 |
| McNally Wellman stationary grab ship unloader (Logan archival installation) | Logan Fixed ship unloader | 1993 | 4 |
Models with the same components are grouped together; select a group to open its component table.
| Component | Location |
|---|---|
| Pagbilao steel tower | Ship unloader main tower |
| Pagbilao fixed trolley track beam | Fixed runway on the upper part of the tower |
| Pagbilao liftable outrigger | hinged apron with runway extending towards the water surface |
| Pagbilao grab trolley | Walking on outstretched arms and runway |
| Pagbilao compensation trolley | Walking on runway; driven by the same rope as the main trolley, no independent drive |
| Pagbilao grab | cabin pickup end; double rope retention/closure system |
| Pagbilao maintaining and closing hoist | Two sets of lifting mechanisms in the mechanical room at the top of the tower |
| Pagbilao wire rope and pulley | Rope between drum, track beam, trolley and grab |
| Pagbilao hoist drum | Mechanical room holding/closing and outrigger hoist |
| Pagbilao gear reducer | Hoist and trolley winch transmission |
| Pagbilao spring brake | Hoist/trolley winch reducer input shaft |
| Pagbilao trolley winch | Mechanical room; rack winch is a rope-driven trolley winch, not mistakenly translated as rack drive |
| Pagbilao traveling trolley and double flange wheel | The four corners of the tower are along the dock track |
| Pagbilao track tightener | On two tracks; spring applied, hydraulically released |
| Pagbilao hopper and heavy duty grating | Material receiving position at the bottom of the tower |
| Pagbilao hopper windshield | Both sides of the hopper |
| Pagbilao belt feeder | From the hopper outlet to the dock conveyor |
| Pagbilao conveyor belt and roller | Inside the belt feeder |
| Pagbilao impact support table | Belt feeder and dock transfer and blanking part |
| Pagbilao retaining side plate and discharge chute | Feeder side and discharge end |
| Pagbilao screw tensioner | Belt feeder tensioning end |
| Pagbilao cutting gate | Belt feeder inlet; manual adjustment |
| Pagbilao electromagnetic iron remover | Above the discharge chute of the feeder |
| Pagbilao iron removal cleaning conveyor | Cleaning part of iron remover |
| Pagbilao manifold and liner | flopgate in the discharge chute of the feeder |
| Pagbilao diverter hydraulic cylinder | Discharge manifold plate driver |
| Pagbilao dust suppression water tank, pump and nozzle | Hopper and dock transfer and blanking place |
| Pagbilao hydraulic power unit | Machinery room; shared by brakes, tight rails and shunts |
| Pagbilao compensated variable pump, accumulator and solenoid valve | Shared hydraulic power unit |
| Pagbilao cable and hose reel | Original preview auxiliary equipment index and dust suppression water supply section |
| Pagbilao repair rewinding winch | Original preview auxiliary equipment Re-Reeving Winch |
| Pagbilao machinery room maintenance crane | For replacement of mechanical/electrical room equipment |
| Component | Location |
|---|---|
| Grab | Ship unloader spreader |
| Hopper grille | Hopper entrance |
| Hopper central baffle | Inside the hopper |
| Lifting lugs | Main pre-assembled assembly |
The Fixed grab ship unloader covers 2 models: McNally Wellman Pagbilao travelling grab ship unloader, McNally Wellman stationary grab ship unloader. Former and renamed designations are listed in the models table on this page.
The Fixed grab ship unloader is also documented under these designations: Hopewell Pagbilao Clamshell Ship Unloader, McNally Wellman stationary grab ship unloader, Logan Fixed ship unloader.
The Fixed grab ship unloader is listed under the McNally Wellman brand as: Rail-mounted travelling grab ship unloader. Period: 1993-12-13. Status: Historical model.
36 components are recorded, including: Pagbilao steel tower, Pagbilao fixed trolley track beam, Pagbilao liftable outrigger, Pagbilao grab trolley, Pagbilao compensation trolley, Pagbilao grab, Pagbilao maintaining and closing hoist, Pagbilao wire rope and pulley and more. The full list with locations is in the components table on this page.
Send us a drawing or sample and tell us the equipment model and part name.
Provide the equipment model, drawing for engineering review and quotation. If service life or wear is a concern, describe the operating conditions as well.
Or contact us directly: +86 156 3797 3199
zzx@anranst.com
ANRANST provides customers worldwide with engineering assessment, production at certified foundries to the customer technical requirements, quality control and finished-part delivery for custom wear parts and industrial spares, with scope to support other custom industrial parts.
We review mating surfaces and interface dimensions and assess material, heat treatment and manufacturing feasibility.
Material grades and heat-treatment processes are specified order by order, stated in the technical agreement and tracked through production.
Drawing confirmation, material and process control, production tracking, inspection and acceptance coordination.
We coordinate manufacturing, quality confirmation, packaging and delivery of complete finished parts in a workable, closed-loop supply process.
Provide the existing model, drawings, drawing, materials or operating conditions so we can identify the appropriate technical review and supply route.
Submit an Enquiry