2010 · 1 model
Select a model to jump to its component table; former and renamed designations are listed under “Historical names / renamings”.
| Model | Historical names / renamings | Period | Components |
|---|---|---|---|
| HTM 04 | HTM 1004 ZA; HTM 604; HTM 704; HTM 804; HTM 904; HTM 1004; HTM 1004 K; HTM 1204; HTM 1204 K; HTM 1504; HTM 904 ZA; HTM 1004 ZA / 38; HTM 1204 ZA; HTM 1204 DA; HTM 1504 DA | 2010 | 5 |
The numbers on the diagram correspond one to one with the rows below.
| No. | Component | Location | Applies to |
|---|---|---|---|
| 1 | Mixing drum | Rotating drum on truck in right photo | HTM generation 04 OEM brochure configuration |
| 2 | Spiral mixing blades | Helical blades inside drum in left OEM cutaway | HTM generation 04 OEM brochure configuration |
| 3 | Discharge chute | Downward discharge chute at rear of truck in right photo | HTM generation 04 OEM brochure configuration |
Models with the same components are grouped together; select a group to open its component table.
| No. | Component | Location |
|---|---|---|
| 1 | Mixing drum | Upper rotating drum |
| 2 | Spiral mixing blade | Inside the mixing drum |
| 3 | Discharge chute | Rear discharge unit |
| Wear protection strip | Screw working section inside the drum | |
| Support support roller | Rear support track of the mixing drum |
The HTM 04 is also documented under these designations: HTM 1004 ZA, HTM 604, HTM 704, HTM 804, HTM 904, HTM 1004, HTM 1004 K, HTM 1204, HTM 1204 K, HTM 1504, HTM 904 ZA, HTM 1004 ZA / 38, HTM 1204 ZA, HTM 1204 DA.
The HTM 04 is listed under the Liebherr brand. Period: 2010. Status: Historical model.
5 components are recorded, including: Mixing drum, Spiral mixing blade, Wear protection strip, Support support roller, Discharge chute. The full list with locations is in the components table on this page.
Model-specific components with their own page: Mixing drum, Spiral mixing blade, Wear protection strip, Support support roller, Discharge chute (5 in total).
Send us a drawing or sample and tell us the equipment model and part name.
Provide the equipment model, drawing for engineering review and quotation. If service life or wear is a concern, describe the operating conditions as well.
Or contact us directly: +86 156 3797 3199
zzx@anranst.com
ANRANST provides customers worldwide with engineering assessment, production at certified foundries to the customer technical requirements, quality control and finished-part delivery for custom wear parts and industrial spares, with scope to support other custom industrial parts.
We review mating surfaces and interface dimensions and assess material, heat treatment and manufacturing feasibility.
Material grades and heat-treatment processes are specified order by order, stated in the technical agreement and tracked through production.
Drawing confirmation, material and process control, production tracking, inspection and acceptance coordination.
We coordinate manufacturing, quality confirmation, packaging and delivery of complete finished parts in a workable, closed-loop supply process.
Provide the existing model, drawings, drawing, materials or operating conditions so we can identify the appropriate technical review and supply route.
Submit an Enquiry