What other names or designations is the Hydraulic demolition shear known by?
The Hydraulic demolition shear is also documented under these designations: Krupp CombiCutter, Krupp CC 1501 R, Krupp CC 2100 R.
Hydraulic demolition shear
Hydraulic demolition shears · 2002 · 1 model
Krupp Berco Bautechnik
Krupp Berco BautechnikBrand
Hydraulic demolition shearsEquipment type
2002Period
Historical modelStatus
Krupp Berco Bautechnik
Models and Historical Names in This Series
Select a model to jump to its component table; former and renamed designations are listed under “Historical names / renamings”.
| Model | Historical names / renamings | Period | Components |
|---|---|---|---|
| Krupp Berco CC CombiCutter hydraulic demolition shears | Krupp CombiCutter; Krupp CC 1501 R; Krupp CC 2100 R | 2002 | 7 |
Krupp Berco Bautechnik
Numbered Components
The numbers on the diagram correspond one to one with the rows below.
| No. | Component | Location | Applies to |
|---|---|---|---|
| 1 | CombiCutter body | Central supporting body above jaws | CombiCutter recycling-jaw configuration |
| 2 | CombiCutter interchangeable jaws | Interchangeable jaws below cutter body | CombiCutter recycling-jaw configuration |
| 3 | CombiCutter cutting blades | Cutting inserts behind recycling jaw tips | CombiCutter recycling-jaw configuration |
| 4 | CombiCutter replaceable crushing tips | Orange tips at recycling jaw ends | CombiCutter recycling-jaw configuration |
| 5 | CombiCutter slewing mechanism with overload protection | Slewing connection above cutter body | CombiCutter recycling-jaw configuration |
| 6 | Hydraulic cylinder | Jaw-actuation cylinders at both sides | CombiCutter recycling-jaw configuration |
Other Components · 2 items
| Component |
|---|
| CombiCutter recycling scissor arm |
| CombiCutter Scrap Cutting Arm |
Krupp Berco Bautechnik
Components by Model
Models with the same components are grouped together; select a group to open its component table.
Krupp Berco CC CombiCutter hydraulic demolition shears7 items
| No. | Component | Location |
|---|---|---|
| 1 | CombiCutter | Main support frame |
| 2 | CombiCutter replaceable scissor arms | Both sides of the working opening of the shear body; interchangeable arm structure |
| 3 | CombiCutter cutting blade | Scissor arm working port; recovery arm blade is behind the crushing tooth tip |
| 4 | CombiCutter replaceable crushing tip | The front part of the recovery shear arm is in contact with the concrete |
| 5 | CombiCutter with overload protection slewing mechanism | Rotating mechanism on the connecting side between shear body and excavator |
| CombiCutter recycling scissor arm | Concrete crushing and steel bar separation working port | |
| CombiCutter Scrap Cutting Arm | Special arm for scrap steel installed at the working port |
Frequently asked questions
Which brand and type of equipment is the Hydraulic demolition shear?
The Hydraulic demolition shear is listed under the Krupp Berco Bautechnik brand as: Hydraulic demolition shears. Period: 2002. Status: Historical model.
Which components and wear parts are recorded for the Hydraulic demolition shear?
7 components are recorded, including: CombiCutter, CombiCutter replaceable scissor arms, CombiCutter recycling scissor arm, CombiCutter Scrap Cutting Arm, CombiCutter cutting blade, CombiCutter replaceable crushing tip, CombiCutter with overload protection slewing mechanism. The full list with locations is in the components table on this page.
How do I enquire about parts for the Hydraulic demolition shear?
Send us a drawing or sample and tell us the equipment model and part name.