Which models does the vMAX-R cover?
The vMAX-R covers 5 models: KREBS vMAX-R 2x2, KREBS vMAX-R 3x3, KREBS vMAX-R 4x4, KREBS vMAX-R 6x6, KREBS vMAX-R 8x8. Former and renamed designations are listed in the models table on this page.
vMAX-R
2026-10-03 · 5 models
KREBS Cyclones and Slurry Pumps
KREBS Cyclones and Slurry PumpsBrand
2026-10-03Period
Historical modelStatus
KREBS Cyclones and Slurry Pumps
Models and Historical Names in This Series
Select a model to jump to its component table; former and renamed designations are listed under “Historical names / renamings”.
| Model | Period | Components |
|---|---|---|
| KREBS vMAX-R 2x2 | 2026-10-03 | 10 |
| KREBS vMAX-R 3x3 | 2026-10-03 | 10 |
| KREBS vMAX-R 4x4 | 2026-10-03 | 10 |
| KREBS vMAX-R 6x6 | 2026-10-03 | 10 |
| KREBS vMAX-R 8x8 | 2026-10-03 | 10 |
KREBS Cyclones and Slurry Pumps
Numbered Components
The numbers on the diagram correspond one to one with the rows below.
| No. | Component | Location |
|---|---|---|
| 1 | Recessed impeller | Recessed impeller at the bottom of the vertical pump |
| 2 | Pump casing | Lower wet-end casing |
| 3 | Suction strainer | Suction strainer below the wet end |
| 4 | Pump shaft | Centre of the vertical shaft |
| 5 | Roller bearing | Upper bearing frame above the liquid level |
| 6 | Discharge elbow | Discharge connection at the side of the casing |
| 7 | Elastomer liner | Blue rubber lining on the internal wet-end surface |
Other Components · 3 items
| Component |
|---|
| Mounting plate |
| Motor mounting bracket |
| V-belt |
KREBS Cyclones and Slurry Pumps
Components by Model
Models with the same components are grouped together; select a group to open its component table.
KREBS vMAX-R 2x2, KREBS vMAX-R 3x3, KREBS vMAX-R 4x4, KREBS vMAX-R 6x6, KREBS vMAX-R 8x810 items
Models: KREBS vMAX-R 2x2, KREBS vMAX-R 3x3, KREBS vMAX-R 4x4, KREBS vMAX-R 6x6, KREBS vMAX-R 8x8
| No. | Component | Location |
|---|---|---|
| 1 | Model-specific component | |
| 2 | Pump casing | |
| 3 | Model-specific component | Outside the pump suction inlet |
| 4 | Pump shaft | |
| 5 | Roller bearing | |
| 6 | Model-specific component | |
| 7 | Model-specific component | |
| Mounting plate | ||
| Electric motor mounting seat | ||
| Model-specific component |
Frequently asked questions
What other names or designations is the vMAX-R known by?
The vMAX-R is also documented under these designations: KREBS vMAX-R 2x2, KREBS vMAX-R 3x3, KREBS vMAX-R 4x4, KREBS vMAX-R 6x6, KREBS vMAX-R 8x8.
Which brand and type of equipment is the vMAX-R?
The vMAX-R is listed under the KREBS Cyclones and Slurry Pumps brand. Period: 2026-10-03. Status: Historical model.
Which components and wear parts are recorded for the vMAX-R?
10 components are recorded, including: Pump casing, Pump shaft, Roller bearing, Mounting plate, Electric motor mounting seat and more. The full list with locations is in the components table on this page.
How do I enquire about parts for the vMAX-R?
Send us a drawing or sample and tell us the equipment model and part name.