2026-10-03 · 16 models
Select a model to jump to its component table; former and renamed designations are listed under “Historical names / renamings”.
| Model | Period | Components |
|---|---|---|
| KREBS TGH 10 in | 2026-10-03 | 6 |
| KREBS TGH 12 in | 2026-10-03 | 6 |
| KREBS TGH 14 in | 2026-10-03 | 6 |
| KREBS TGH 16 in | 2026-10-03 | 6 |
| KREBS TGH 18 in | 2026-10-03 | 6 |
| KREBS TGH 2 in | 2026-10-03 | 6 |
| KREBS TGH 20 in | 2026-10-03 | 6 |
| KREBS TGH 24 in | 2026-10-03 | 6 |
| KREBS TGH 26 in | 2026-10-03 | 6 |
| KREBS TGH 28 in | 2026-10-03 | 6 |
| KREBS TGH 3 in | 2026-10-03 | 6 |
| KREBS TGH 30 in | 2026-10-03 | 6 |
| KREBS TGH 36 in | 2026-10-03 | 6 |
| KREBS TGH 4 in | 2026-10-03 | 6 |
| KREBS TGH 6 in | 2026-10-03 | 6 |
| KREBS TGH 8 in | 2026-10-03 | 6 |
The numbers on the diagram correspond one to one with the rows below.
| No. | Component | Location |
|---|---|---|
| 1 | Actuator assembly | Actuator housing above the valve body |
| 2 | Sealing sleeve | Visible sealing sleeve face at the circular valve port |
| 3 | Valve body | External pressure valve body |
| Component |
|---|
| Gate |
| Gate wiper blade |
| Stem dust boot |
| Splash guard |
Models with the same components are grouped together; select a group to open its component table.
Models: KREBS TGH 10 in, KREBS TGH 12 in, KREBS TGH 14 in, KREBS TGH 16 in, KREBS TGH 18 in, KREBS TGH 2 in, KREBS TGH 20 in, KREBS TGH 24 in, KREBS TGH 26 in, KREBS TGH 28 in, KREBS TGH 3 in, KREBS TGH 30 in, KREBS TGH 36 in, KREBS TGH 4 in, KREBS TGH 6 in, KREBS TGH 8 in
| No. | Component |
|---|---|
| 1 | Model-specific component |
| 2 | Wear seal sleeve |
| Model-specific component | |
| Model-specific component | |
| Dust sleeve | |
| Model-specific component |
The TGH covers 16 models: KREBS TGH 10 in, KREBS TGH 12 in, KREBS TGH 14 in, KREBS TGH 16 in, KREBS TGH 18 in, KREBS TGH 2 in, KREBS TGH 20 in, KREBS TGH 24 in, KREBS TGH 26 in, KREBS TGH 28 in, KREBS TGH 3 in, KREBS TGH 30 in, KREBS TGH 36 in, KREBS TGH 4 in, KREBS TGH 6 in, KREBS TGH 8 in. Former and renamed designations are listed in the models table on this page.
The TGH is also documented under these designations: KREBS TGH 10 in, KREBS TGH 12 in, KREBS TGH 14 in, KREBS TGH 16 in, KREBS TGH 18 in, KREBS TGH 2 in, KREBS TGH 20 in, KREBS TGH 24 in, KREBS TGH 26 in, KREBS TGH 28 in, KREBS TGH 3 in, KREBS TGH 30 in, KREBS TGH 36 in, KREBS TGH 4 in.
The TGH is listed under the KREBS Cyclones and Slurry Pumps brand. Period: 2026-10-03. Status: Historical model.
6 components are recorded, including: Wear seal sleeve, Dust sleeve and more. The full list with locations is in the components table on this page.
Send us a drawing or sample and tell us the equipment model and part name.
Provide the equipment model, drawing for engineering review and quotation. If service life or wear is a concern, describe the operating conditions as well.
Or contact us directly: +86 156 3797 3199
zzx@anranst.com
ANRANST provides customers worldwide with engineering assessment, production at certified foundries to the customer technical requirements, quality control and finished-part delivery for custom wear parts and industrial spares, with scope to support other custom industrial parts.
We review mating surfaces and interface dimensions and assess material, heat treatment and manufacturing feasibility.
Material grades and heat-treatment processes are specified order by order, stated in the technical agreement and tracked through production.
Drawing confirmation, material and process control, production tracking, inspection and acceptance coordination.
We coordinate manufacturing, quality confirmation, packaging and delivery of complete finished parts in a workable, closed-loop supply process.
Provide the existing model, drawings, drawing, materials or operating conditions so we can identify the appropriate technical review and supply route.
Submit an Enquiry