Track impact crushing plant · 5 models
The numbers on the diagram correspond one to one with the rows below.
| No. | Component | Location |
|---|---|---|
| 1 | Conveyor belt | Discharge conveyor downstream of the crusher |
| 2 | Crawler track | Tracked undercarriage below the plant |
| 3 | Feed hopper | Receiving area upstream of the impactor |
| 4 | HSI crusher assembly | Impactor unit in the center of the plant |
| Component |
|---|
| Blow Bar |
| Impact Plate / Breaker Plate |
| Rotor |
| Hydraulic adjusting device |
| Hydraulically opening housing |
Models with the same components are grouped together; select a group to open its component table.
Models: FT4250CC, FT4250OC, FT5260, GT440CC, GT440OC
| No. | Component | Location |
|---|---|---|
| 1 | Conveyor Belt | |
| Blow Bar | ||
| Impact Plate / Breaker Plate | Working face of the impact frame | |
| Rotor | Center of the crushing chamber | |
| Hydraulic adjusting device | Impact frame adjustment position | |
| Hydraulically opening housing | Upper access opening of the crushing chamber |
The Mobile Andreas HSI Plants Track impact crushing plant covers 5 models: FT4250CC, FT4250OC, FT5260, GT440CC, GT440OC. Former and renamed designations are listed in the models table on this page.
The Mobile Andreas HSI Plants Track impact crushing plant is also documented under these designations: FT4250CC, FT4250OC, FT5260, GT440CC, GT440OC.
The Mobile Andreas HSI Plants Track impact crushing plant is listed under the Kolberg-Pioneer brand as: Track impact crushing plant. Status: Historical model.
6 components are recorded, including: Blow Bar, Impact Plate / Breaker Plate, Conveyor Belt, Rotor, Hydraulic adjusting device, Hydraulically opening housing. The full list with locations is in the components table on this page.
Model-specific components with their own page: Rotor, Hydraulic adjusting device, Hydraulically opening housing (3 in total).
Send us a drawing or sample and tell us the equipment model and part name.
Provide the equipment model, drawing for engineering review and quotation. If service life or wear is a concern, describe the operating conditions as well.
Or contact us directly: +86 156 3797 3199
zzx@anranst.com
ANRANST provides customers worldwide with engineering assessment, production at certified foundries to the customer technical requirements, quality control and finished-part delivery for custom wear parts and industrial spares, with scope to support other custom industrial parts.
We review mating surfaces and interface dimensions and assess material, heat treatment and manufacturing feasibility.
Material grades and heat-treatment processes are specified order by order, stated in the technical agreement and tracked through production.
Drawing confirmation, material and process control, production tracking, inspection and acceptance coordination.
We coordinate manufacturing, quality confirmation, packaging and delivery of complete finished parts in a workable, closed-loop supply process.
Provide the existing model, drawings, drawing, materials or operating conditions so we can identify the appropriate technical review and supply route.
Submit an Enquiry