Start with the brand, equipment series and installed machine, then explore wear parts, drive and structural spares, materials and processes, drawing review, quality control and finished-part delivery.
This page covers equipment series and models, part locations, materials and processes, drawing review and inquiry options. Before manufacture or quotation, confirm OEM drawing numbers, dimensions and tooling suitability against the complete model and drawings.
The model table assists with machine identification. Manufacture and quotation require the nameplate, complete model, serial number, drawing number, general arrangement and drawing revision.
| Series / Model | Equipment Range and Identification | Equipment History and Identification |
|---|---|---|
| PE Series jaw crushers | PE250×400, PE400×600, PE500×750, PE600×900, PE750×1060, PE800×1060, PE870×1060, PE900×1200, PE1000×1200, PE1200×1500; PEX250×750, PEX250×1000, PEX250×1200, PEX300×1300 | Identify by feed opening, model and drawing |
| C Series jaw crushers | C80, C96, C100, C106, C110, C116, C125, C140, C145, C160, C200, C3054 | Kinglink models; matching model names do not establish interchangeability with other brands |
| PF Series impact crushers | PF-1007, PF-1010, PF-1210, PF-1214, PF-1315, PF-1316, PF-1320, PF-1515 | Identify by rotor, blow bar and impact apron design |
| KPF Series impact crushers | KPF1010, KPF1012, KPF1016, KPF1408, KPF1410, KPF1412, KPF1416, KPF1420 | Hydraulic impact crusher range |
| KCS/KCH Series cone crushers | KCS420, KCS430, KCS440, KCS660; KCH420, KCH430, KCH440, KCH660, KCH870 | Identify by complete model, chamber configuration and part drawing |
| HPY Series multi-cylinder hydraulic cone crushers | HPY-200, HPY-300, HPY-400, HPY-500, HPY-800 | Identify by complete model, chamber configuration and part drawing |
| KL Series cone crushers | KLC600, KLF600; KLC/KLM/KLF1000, 1160, 1300, 1380, 1500, 1680 | Identify by series, size and chamber configuration |
| K Series vertical shaft impact crushers | KL-5, KL-7, KL-8, KL-10, KL-12 | VSI range; identify separately from KL cone crushers |
These cards describe generic crushing equipment parts and the information needed to specify them. Confirm suitability against the actual Kinglink model and drawings.
Wear Parts by Installation Position
Identify crushing equipment wear parts by location, wear pattern and operating conditions. Provide the complete model, drawing number, drawings or existing-part photos for material and manufacturing review.
Send Equipment Details →Identify gears, shafts, sleeves, bearings, seals, hydraulic parts, supports and connectors for drawing review. Listed OEM drawing or part references relate to identified parts and require confirmation against your machine.
Spares by Drawing and Assembly
Identify crushing equipment spares by drive, structural, hydraulic and support systems. Provide the complete model, assembly position and drawings to review interface dimensions and manufacturing requirements.
Send Equipment Details →Provide the complete model, serial number, drawing or part number, drawing revision, installation position, photographs of the current part, material and operating conditions.
No. General images help identify the part category. Manufacture requires agreed drawings, dimensions, interfaces, materials and acceptance criteria.
Start with the nameplate, general arrangement drawing, installation position, used-part photographs and key dimensions. We can then assess the feasibility of dimensional inspection, material evaluation and manufacture to drawing.
Provide the complete model, serial number, nameplate, installation position, photographs of the current part, drawings, material and operating conditions. We use these to identify the part, assess materials, match manufacturing resources, coordinate quality control and arrange finished-part delivery.
Phone: +86 156 3797 3199
zzx@anranst.com
ANRANST provides customers worldwide with coordinated consulting, supplier sourcing, quality control and finished-part delivery for custom parts, wear parts and industrial spares from China, with scope to support other custom industrial parts.
Equipment and part identification, drawing review, material selection and manufacturing feasibility assessment.
Match requirements with suitable manufacturers in China and coordinate the exchange of technical information.
Drawing confirmation, material and process control, production tracking, inspection and acceptance coordination.
Coordinate manufacturing, quality confirmation, packaging and delivery of complete finished parts.
Provide the existing model, drawings, drawing or part numbers, materials or operating conditions so we can identify the appropriate technical review and supply route.
Submit an Enquiry