2018 · 3 models
Select a model to jump to its component table; former and renamed designations are listed under “Historical names / renamings”.
| Model | Period | Components |
|---|---|---|
| Elgin Independent Polymer Injection | 2018 | 6 |
| Elgin Polymer Injection 10 ft Container | 2018 | 6 |
| Elgin Polymer Injection 20 ft Container | 2018 | 6 |
The numbers on the diagram correspond one to one with the rows below.
| No. | Component | Location | Applies to |
|---|---|---|---|
| 1 | Progressive cavity polymer pump | Lower-left green progressive cavity pump | Polymer Injection 20 ft Container |
| 2 | Tank agitator | Agitator drive on tank top | Polymer Injection 20 ft Container |
| 3 | Flowmeter | Flowmeter on right vertical pipe | Polymer Injection 20 ft Container |
| 4 | Polymer tank | Central blue polymer tank | Polymer Injection 20 ft Container |
| Component |
|---|
| Static mixer |
| Hydration manifold |
| Level sensor |
Models with the same components are grouped together; select a group to open its component table.
Models: Elgin Independent Polymer Injection, Elgin Polymer Injection 10 ft Container, Elgin Polymer Injection 20 ft Container
| No. | Component | Location |
|---|---|---|
| 1 | Screw polymer pump | Polymer dosing line |
| 2 | In-tank agitator | Hydration preparation tank |
| 3 | Flowmeter | Preparation and dosing monitoring line |
| Static mixer | Polymer in-line mixing pipe section | |
| Hydration manifold | Polymer premix supply position | |
| Level sensor | Liquid level monitoring point of the preparation tank |
The Polymer Injection covers 3 models: Elgin Independent Polymer Injection, Elgin Polymer Injection 10 ft Container, Elgin Polymer Injection 20 ft Container. Former and renamed designations are listed in the models table on this page.
The Polymer Injection is also documented under these designations: Elgin Independent Polymer Injection, Elgin Polymer Injection 10 ft Container, Elgin Polymer Injection 20 ft Container.
The Polymer Injection is listed under the Elgin brand. Period: 2018. Status: Historical model.
6 components are recorded, including: Screw polymer pump, In-tank agitator, Static mixer, Hydration manifold, Flowmeter, Level sensor. The full list with locations is in the components table on this page.
Model-specific components with their own page: Screw polymer pump, In-tank agitator, Static mixer, Hydration manifold, Flowmeter, Level sensor (6 in total).
Send us a drawing or sample and tell us the equipment model and part name.
Provide the equipment model, drawing for engineering review and quotation. If service life or wear is a concern, describe the operating conditions as well.
Or contact us directly: +86 156 3797 3199
zzx@anranst.com
ANRANST provides customers worldwide with engineering assessment, production at certified foundries to the customer technical requirements, quality control and finished-part delivery for custom wear parts and industrial spares, with scope to support other custom industrial parts.
We review mating surfaces and interface dimensions and assess material, heat treatment and manufacturing feasibility.
Material grades and heat-treatment processes are specified order by order, stated in the technical agreement and tracked through production.
Drawing confirmation, material and process control, production tracking, inspection and acceptance coordination.
We coordinate manufacturing, quality confirmation, packaging and delivery of complete finished parts in a workable, closed-loop supply process.
Provide the existing model, drawings, drawing, materials or operating conditions so we can identify the appropriate technical review and supply route.
Submit an Enquiry