2018 · 10 models
Select a model to jump to its component table; former and renamed designations are listed under “Historical names / renamings”.
| Model | Historical names / renamings | Period | Components |
|---|---|---|---|
| Armourblade | 1 | ||
| DipperEdge | 9-tooth wide radius; square corner | 2018 | 4 |
| GET Box Points and Wear Protection | Super Penetrator; Rock Abrasion; Loader Panel; Heavy Rock; Rock Penetrator; Double Panel; Tiger Point; HD Point; EHD Point | 8 | |
| RazerEdge | 4 | ||
| SaberEdge | Berkeley Forge SaberEdge | 6 | |
| SNRG | 14T and above | 2 | |
| Stingray | 2007 | 4 | |
| TLC | Berkeley Forge TLC | 6 | |
| Wearpact Light | 7–10 tonne | 2 | |
| Wearpact | standard; heavy duty | 2 |
The numbers on the diagram correspond one to one with the rows below.
| No. | Component | Location | Applies to |
|---|---|---|---|
| 1 | Bucket tooth | Tooth point at the front of the lip | GET Box Points and Wear Protection |
| 2 | Tooth adapter | Adapter behind the tooth point | GET Box Points and Wear Protection |
| 3 | Lip shroud | Blue shroud between adjacent adapters | GET Box Points and Wear Protection |
| 4 | Bucket wing shroud | Upright blue bucket wing protector | GET Box Points and Wear Protection |
| 5 | Bucket lip | Grey lip supporting adapters and shrouds | GET Box Points and Wear Protection |
| 6 | Lip wing shroud | Wing shroud at the left-hand lip end | GET Box Points and Wear Protection |
| Component |
|---|
| Cast lip |
| Retaining pin and lock |
| Machined lip |
| Wedge-nut locking system |
| Ground engaging tools |
| Weld-on cutting edge |
| Bucket corner shroud |
| Wear bar |
| Wear button |
Models with the same components are grouped together; select a group to open its component table.
Models: DipperEdge, RazerEdge, Stingray
| No. | Component | Location |
|---|---|---|
| 1 | Bucket tooth | |
| 2 | Tooth adapter | |
| 3 | Model-specific component | |
| Cast lip plate | Load-bearing and digging edge at the bucket front |
Models: SaberEdge, TLC
| No. | Component | Location |
|---|---|---|
| 1 | Bucket tooth | |
| 2 | Tooth adapter | |
| 3 | Model-specific component | |
| 4 | Model-specific component | |
| Model-specific component | ||
| Machined lip plate | Front edge of the rope shovel bucket |
Models: Wearpact Light, Wearpact
| No. | Component | Location |
|---|---|---|
| 6 | Model-specific component | |
| Wedge nut lock | Connection between the GET and the lip plate |
| No. | Component |
|---|---|
| 1 | Bucket tooth |
| 2 | Tooth adapter |
| 3 | Model-specific component |
| 4 | Model-specific component |
| Model-specific component | |
| Model-specific component | |
| Model-specific component | |
| Wear push button |
| Component | Location |
|---|---|
| Model-specific component | |
| Wedge nut lock | Connection between the GET and the lip plate |
| Component |
|---|
| Model-specific component |
The CR Ground Engaging Tools and Lip Systems covers 10 models: Armourblade, DipperEdge, GET Box Points and Wear Protection, RazerEdge, SaberEdge, SNRG, Stingray, TLC, Wearpact Light, Wearpact. Former and renamed designations are listed in the models table on this page.
The CR Ground Engaging Tools and Lip Systems is also documented under these designations: Armourblade, DipperEdge, 9-tooth wide radius, square corner, GET Box Points and Wear Protection, Super Penetrator, Rock Abrasion, Loader Panel, Heavy Rock, Rock Penetrator, Double Panel, Tiger Point, HD Point, EHD Point.
The CR Ground Engaging Tools and Lip Systems is listed under the CR brand. Period: 2018. Status: Historical model.
14 components are recorded, including: Bucket tooth, Tooth adapter, Wear push button, Cast lip plate, Machined lip plate, Wedge nut lock and more. The full list with locations is in the components table on this page.
Model-specific components with their own page: Cast lip plate, Machined lip plate, Wedge nut lock (3 in total).
Send us a drawing or sample and tell us the equipment model and part name.
Provide the equipment model, drawing for engineering review and quotation. If service life or wear is a concern, describe the operating conditions as well.
Or contact us directly: +86 156 3797 3199
zzx@anranst.com
ANRANST provides customers worldwide with engineering assessment, production at certified foundries to the customer technical requirements, quality control and finished-part delivery for custom wear parts and industrial spares, with scope to support other custom industrial parts.
We review mating surfaces and interface dimensions and assess material, heat treatment and manufacturing feasibility.
Material grades and heat-treatment processes are specified order by order, stated in the technical agreement and tracked through production.
Drawing confirmation, material and process control, production tracking, inspection and acceptance coordination.
We coordinate manufacturing, quality confirmation, packaging and delivery of complete finished parts in a workable, closed-loop supply process.
Provide the existing model, drawings, drawing, materials or operating conditions so we can identify the appropriate technical review and supply route.
Submit an Enquiry