Underground load-haul-dump loader · 2 2013–2014 · 5 models
Select a model to jump to its component table; former and renamed designations are listed under “Historical names / renamings”.
| Model | Historical names / renamings | Period | Components |
|---|---|---|---|
| Bucyrus Compact Loader (historical designation unrecorded) | Bucyrus Underground LHD loader Compact Loader (6 tonne); Bucyrus Underground LHD loader Compact Loader (10 tonne); Bucyrus Underground LHD loader Compact Loader (15 tonne); Bucyrus Compact Loader; Cat CL110 | 2 2013–2014 | 44 |
| Bucyrus FBL loader product family | Bucyrus Underground LHD loader FBL10; Bucyrus Underground LHD loader FBL15 | 2 2013–2014 | 8 |
| Bucyrus MH loader product family | Bucyrus Underground LHD loader MH10; Bucyrus Underground LHD loader MH15; Cat CL210B | 2 2013–2014 | 44 |
| Bucyrus 482 underground scoop | Bucyrus 482D | 2 2013–2014 | 5 |
| Bucyrus 488 underground scoop / LHD family | Bucyrus / LHD 488XL; Bucyrus / LHD 488D XP; Bucyrus / LHD 488-6 DM; Bucyrus / LHD 488L; Bucyrus / LHD 488-6; Bucyrus / LHD 488D LHD XP; Bucyrus 488D Un-A-Trac; CAT(Bucyrus)488D Un-A-Trac | 2 2013–2014 | 21 |
The numbers on the diagram correspond one to one with the rows below.
| No. | Component | Location | Applies to |
|---|---|---|---|
| 1 | Bucket | Bucket at the front of the loading attachment | CL210B |
| 2 | Tire | Tires on the front and rear axles | CL210B |
| 3 | Articulation joint | Articulation between the front and rear frames | CL210B |
| 4 | Lift arm | Lift arm between the front frame and bucket | CL210B |
| Component |
|---|
| Double acting hydraulic cylinder |
| Steering/brake hydraulic filter |
| Hinge pin and bushing |
| Brake accumulator |
| Gear hydraulic pump |
| Wheel end planetary transmission and wet braking |
| Traveling reduction gearbox |
| Hinge pin and spherical bushing |
| Battery socket and connection accessories |
| Articulated center locking lever |
| Handheld calibrator |
| 488D2009 turbine aftercooling engine |
| 488D2009Dana four-speed power shift transmission |
| 488D2009 dual 12V battery |
| 488D2009 frame |
| 488D2009 quick-change accessory connection system |
| 488D2009 cab control joystick |
| 488D2009SAHR external brake |
| 488D2009 filled tire |
| 488D submitted for review Cummins QSB6.7 engine |
| 488D submitted for review of DST emission control system |
| 488D DPM filter submitted for review |
| 488D exhaust heat exchanger submitted for review |
| 488D exhaust catalytic converter submitted for review |
| 488D flame arrester submitted for review |
| 488D exhaust pipe and bend section submitted for review |
| 2008 Compact Loader Diesel Drive System |
| Successor of CL110 push-away bucket |
| Successor CL110 diesel engine |
| Successor CL110 water cooling radiator |
| Successor to CL110 hydraulically driven fan |
| Successor CL110 pneumatic starter |
| Successor CL110 two-stage dry air intake filter |
| Successor of CL110 water bath explosion-proof exhaust processor |
| Successor CL110 catalytic exhaust purifier |
| Successor CL110 power shift transmission |
| Successor CL110 torque converter |
| successor to CL110 front and rear axles |
| Successor CL110 differential gear assembly |
| Successor of CL110 heavy duty rim |
Models with the same components are grouped together; select a group to open its component table.
| Component | Location |
|---|---|
| 2008 Compact Loader Diesel Drive System | The US market exhibition draft clearly states diesel drive; engine selection is not included |
| Successor of CL110 push-away bucket | Standard bucket 2.7m³ stacking/2.25m³ flat packaging |
| Successor CL110 diesel engine | Cat C7 six-cylinder 7.2L turbocharged, 2013 version |
| Successor CL110 water cooling radiator | Engine cooling |
| Successor to CL110 hydraulically driven fan | Engine cooling |
| Successor CL110 pneumatic starter | 2013 original specification starting system |
| Successor CL110 two-stage dry air intake filter | Primary/secondary filter element |
| Successor of CL110 water bath explosion-proof exhaust processor | Original watch made by Bucyrus, historical approval does not mean it is valid today |
| Successor CL110 catalytic exhaust purifier | 2013 package |
| Successor CL110 power shift transmission | Four gears for front and rear modulation, not all old Compact Loaders |
| Successor CL110 torque converter | Unit structure on the engine |
| successor to CL110 front and rear axles | Built-in planetary type |
| Successor CL110 differential gear assembly | Bevel gear and pinion gear category |
| Successor of CL110 heavy duty rim | Five-piece rim |
| Successor CL110 tire | Original standard 17.5×25L3 radial pneumatic tire |
| Successor CL110 steering/brake hydraulic filter | Pressure filter 10 micron |
| Successor CL110 bucket/PTO hydraulic filter | Pressure filter 10 micron |
| Successor CL110 auxiliary hydraulic filter | Pressure filter 10 micron |
| Successor CL110 common return filter | The fuel tank is equipped with a 25 micron replaceable bypass filter. |
| Successor CL110 steering valve and cylinder | Orbital category in the original table, the number of cylinders is not inferred |
| Successor CL110 sealed pressure tank | Steering system original table category |
| Successor CL110 closed central control valve | Operating system |
| Successor CL110 direction joystick | Job control |
| Successor CL110 hinge pin | 2013 hinge position |
| Successor CL110 hinge bushing | 2013 hinge position |
| Successor CL110 articulated swing ball bearing | Hinge position swing mechanism |
| Successor CL110 air suspension seat | Horizontal seat arrangement |
| Successor CL110 adjustable cab ceiling | |
| Successor CL110 electrical system | Original 24V floating polarity explosion-proof package |
| Successor of CL110 front and rear lights | Original Bucyrus explosion-proof lamp, not all old units |
| Successor CL110 hydraulic drive generator | Original Bucyrus explosion-proof category |
| Successor CL110 piston air compressor | Engine gear drive |
| Successor CL110 main gas tank | Original watch 150L |
| Successor CL110 fuel tank | Original watch 150L |
| Successor CL110 hydraulic oil tank | Original watch 250L |
| successor CL110 water tank | Original watch 300L |
| Successor CL110 RAS quick change system | Original standard package, non-optional accessories |
| Successor CL110 side shift fork | Original text option |
| Successor CL110 manual side shift fork | Original text additional options |
| Successor CL110 front C-type Cockie Plate and winch | Original text option, don’t guess the specific function/material of the plate |
| Successor CL110 slewing arm crane | Original text option |
| Successor CL110 belt/cable reel | Original text option |
| Successor CL110 working platform | Original text option |
| Successor of CL110 three cubic meter bucket | Original option, spade or straight lip |
| Component | Location |
|---|---|
| Successor of CL210B 2012 standard dump bucket | 1 page, 3.5m³ stacking/2.7m³ flat packaging; bucket load 8t does not equal the load of all attachments |
| Successor CL210B 2012 Cat C7 Diesel Engine | 1 page six-cylinder turbo; 2012 version only |
| Successor CL210B 2012 coolant radiator | 1 page rear vertical |
| Successor of CL210B 2012 hydraulically driven cooling fan | 1 page |
| Successor of CL210B 2012 air turbine starter | 1 page pneumatic starting |
| Successor of CL210B 2012 dry double filter air intake cleaner | 1 page |
| Successor of CL210B 2012 spiral wound air intake flame arrester | 1 page |
| Successor of CL210B 2012 explosion-proof wet exhaust conditioner | 1 page |
| Successor of CL210B 2012 replaceable exhaust filter element | 1 page, except for Chinese configuration |
| Successor CL210B 2012 replaceable exhaust flame arrester | 1 page, China and RSA named configuration |
| Successor of CL210B 2012 catalytic exhaust purifier | 1 page post-processing |
| Successor CL210B 2012 power shift transmission | 1 page forward/reverse with four gears each |
| Successor of CL210B 2012 external planetary axle | 1 page |
| Successor of CL210B 2012 fixed front axle and swing bearing rear axle | 1 page separately constructed |
| Successor of CL210B 2012 bevel gear and pinion gear | 1-page bridge drive |
| Successor of CL210B 2012 heavy-duty five-piece wheels | 1-page wheel structure, not five wheels |
| Successor CL210B 2012 pneumatic radial tire | 2 pages XKA 17.5×R25; without 488D polyurethane filled tires |
| Successor of CL210B 2012 bucket oil return filter | 2 pages 10µm replaceable with bypass |
| Successor CL210B 2012 steering brake pressure filter | 2 pages 10µm replaceable with bypass |
| Successor of CL210B 2012 transverse driver’s seat | 2 pages |
| Successor of CL210B 2012 ROPS/FOPS protection shed | 2 pages |
| Successor CL210B 2012 12V explosion-proof electrical system | 2 pages; does not declare the voltage of the old MH10 throughout the period |
| Successor CL210B 2012 DCS electronic shutdown system | 2 pages of standard/optional monitoring functions separated, no fictitious item-by-item sensor BOM |
| Successor of CL210B 2012 front and rear explosion-proof light set | 2 pages front and rear lights |
| Successor of CL210B 2012 hydraulic drive alternator | 2 pages |
| Successor of CL210B 2012 engine gear driven piston compressor | 2 pages |
| Successor CL210B 2012 air storage tank | 2 pages 150L |
| Successor CL210B 2012 hydraulic oil tank | 2 pages 250L |
| Successor CL210B 2012 fuel tank | 2 pages 200L |
| Successor of CL210B 2012 water tank | 2 pages 450L |
| Successor of CL210B 2012 side shift fork | Optional on page 4, 10t |
| Successor of CL210B 2012 slewing boom | Page 4 optional, 7t |
| Successor of CL210B 2012 shovel or straight lip bucket | Optional on page 4, 3.5m³ |
| Successor of CL210B 2012 direct-mounted bucket | Optional on page 4, 5m³ |
| Successor of CL210B 2012 universal trailer | Page 4 options |
| Successor of CL210B 2012 pipe trailer | Page 4 options |
| Successor CL210B 2012 power assist ready configuration | Optional on page 4, no complete members are included |
| Successor of CL210B 2012 belt/cable winding attachment | Page 4 optional, 7t |
| Successor of CL210B 2012 manual side shift fork | Optional on page 4, 10t |
| Successor CL210B 2012 SH150 trailer power assist | Optional on page 4, no complete members are included |
| Successor CL210B 2012 working platform | Page 4 options |
| Successor CL210B 2012 fuel tank attachment | Optional Fuel Pod on page 4 |
| Successor of CL210B 2012 concrete hopper | Page 4 options |
| Successor CL210B 2012 SH150 traction adapter | Page 4 options |
| Component | Location | Part / drawing no. |
|---|---|---|
| Wheel end planetary transmission and wet braking | Traveling axle | 390829 / DBT390829 |
| Traveling reduction gearbox | Travel transmission | 246963 / L-A10550X4 |
| Hinge pin and spherical bushing | fuselage hinge | 285573 / L-LUD02699 |
| Battery socket and connection accessories | Battery electrical connection | 378656 / 606984 / DBT378656 / DBT606984 |
| Articulated center locking lever | Maintenance fixed accessories | |
| Handheld calibrator | Control adjustment/fault diagnosis accessories | |
| 488D2009 turbine aftercooling engine | This exhibit has 156hp, the specific engine manufacturer/model is not specified. | |
| 488D2009Dana four-speed power shift transmission | The transmission of this exhibit does not match the configuration submitted for review in 2012 | |
| 488D2009 dual 12V battery | This version of 24V startup/12V system does not push all 488 | |
| 488D2009 frame | News clarifies low frame carrying powertrain | |
| 488D2009 quick-change accessory connection system | Quick Attach System, the complete list of attachments is not included | |
| 488D2009 cab control joystick | Control lever named by the manufacturer, no internal mechanism included | |
| 488D2009SAHR external brake | News clear SAHR; no friction materials or dimensions included | |
| 488D2009 filled tire | This version of the tire specification is named; it is not copied as the standard tire for all modifications | |
| 488D submitted for review Cummins QSB6.7 engine | 2011–12 This example was rated 193hp, and the entire machine was derated to 170hp | |
| 488D submitted for review of DST emission control system | Main text M30, attachment specification page title M335; name differences retained | |
| 488D DPM filter submitted for review | Named M30 in the text and appendix | M30-411-01R |
| 488D exhaust heat exchanger submitted for review | Verification text and specification attachments are signed, no internal materials are included | M190-301-01 |
| 488D exhaust catalytic converter submitted for review | Name the specifications and accessories, do not copy the supply code | M295-225-02 |
| 488D flame arrester submitted for review | The verification objects and corresponding conditions of this model are not fully 488 certified. | |
| 488D exhaust pipe and bend section submitted for review | The case shows that there are three bends and extensions on the outside of the flame arrester, which is not a recommended design for general standards. |
| Component | Location |
|---|---|
| Quick accessory connection system | Scraper working device interface |
| Side shift fork | Optional accessories for transporting work panel troughs |
| Push plate bucket | Optional shovel working device |
| Boom lifting accessories | Optional maintenance work device |
| Cable/conveyor belt rewinding accessories | Optional working device |
| Replaceable particle filter | Diesel exhaust system |
| Heat exchanger or wet scrubber | Exhaust cooling system selected according to version |
| Catalytic converter | Exhaust system |
| Component | Location |
|---|---|
| Double acting hydraulic cylinder | Loading/articulation hydraulic function |
| Steering/brake hydraulic filter | Steering brake circuit |
| Hinge pin and bushing | fuselage hinge |
| Brake accumulator | Brake hydraulic system |
| Gear hydraulic pump | Main hydraulic pump unit |
The Bucyrus Underground LHD Loaders and Scoops covers 5 models: Bucyrus Compact Loader, Bucyrus FBL loader product family, Bucyrus MH loader product family, Bucyrus 482 underground scoop, Bucyrus 488 underground scoop / LHD family. Former and renamed designations are listed in the models table on this page.
The Bucyrus Underground LHD Loaders and Scoops is also documented under these designations: Bucyrus Compact Loader, Bucyrus Underground LHD loader Compact Loader, Cat CL110, Bucyrus FBL loader product family, Bucyrus Underground LHD loader FBL10, Bucyrus Underground LHD loader FBL15, Bucyrus MH loader product family, Bucyrus Underground LHD loader MH10, Bucyrus Underground LHD loader MH15, Cat CL210B, Bucyrus 482 underground scoop, Bucyrus 482D, Bucyrus 488 underground scoop / LHD family, Bucyrus / LHD 488XL.
The Bucyrus Underground LHD Loaders and Scoops is listed under the Bucyrus brand as: Underground load-haul-dump loader. Period: 2 2013–2014. Status: Historical model.
122 components are recorded, including: 2008 Compact Loader Diesel Drive System, Successor of CL110 push-away bucket, Successor CL110 diesel engine, Successor CL110 water cooling radiator, Successor to CL110 hydraulically driven fan, Successor CL110 pneumatic starter, Successor CL110 two-stage dry air intake filter, Successor of CL110 water bath explosion-proof exhaust processor and more. The full list with locations is in the components table on this page.
Wheel end planetary transmission and wet braking: 390829 / DBT390829, Traveling reduction gearbox: 246963 / L-A10550X4, Hinge pin and spherical bushing: 285573 / L-LUD02699, Battery socket and connection accessories: 378656 / 606984 / DBT378656 / DBT606984, 488D DPM filter submitted for review: M30-411-01R, 488D exhaust heat exchanger submitted for review: M190-301-01, 488D exhaust catalytic converter submitted for review: M295-225-02.
Model-specific components with their own page: Successor CL110 RAS quick change system, Successor CL110 side shift fork, Successor CL110 manual side shift fork, Successor CL110 front C-type Cockie Plate and winch, Successor CL110 slewing arm crane, Successor CL110 belt/cable reel, Successor CL110 working platform, Successor of CL110 three cubic meter bucket and more (22 in total).
Bucyrus Compact Loader (6 tonne) → Cat / Unit Rig CL106, Bucyrus Compact Loader (10 tonne) → Cat / Unit Rig CL110, Bucyrus Compact Loader (15 tonne) → Cat / Unit Rig CL115, Bucyrus FBL10 → Cat / Unit Rig CL210.
Send us a drawing or sample and tell us the equipment model and part name.
Provide the equipment model, drawing for engineering review and quotation. If service life or wear is a concern, describe the operating conditions as well.
Or contact us directly: +86 156 3797 3199
zzx@anranst.com
ANRANST provides customers worldwide with engineering assessment, production at certified foundries to the customer technical requirements, quality control and finished-part delivery for custom wear parts and industrial spares, with scope to support other custom industrial parts.
We review mating surfaces and interface dimensions and assess material, heat treatment and manufacturing feasibility.
Material grades and heat-treatment processes are specified order by order, stated in the technical agreement and tracked through production.
Drawing confirmation, material and process control, production tracking, inspection and acceptance coordination.
We coordinate manufacturing, quality confirmation, packaging and delivery of complete finished parts in a workable, closed-loop supply process.
Provide the existing model, drawings, drawing, materials or operating conditions so we can identify the appropriate technical review and supply route.
Submit an Enquiry