Hydraulic crawler drilling rig · 2 2013–2014 · 3 models
Select a model to jump to its component table; former and renamed designations are listed under “Historical names / renamings”.
| Model | Historical names / renamings | Period | Components |
|---|---|---|---|
| Bucyrus 345 series hydraulic crawler drilling rig | Bucyrus Hydraulic track Drill rig 345; Bucyrus Hydraulic track Drill rig 345S; Cat MD5090 | 2 2013–2014 | 36 |
| Bucyrus R series hydraulic crawler drilling rig | Bucyrus Hydraulic track Drill rig R20C; Bucyrus Hydraulic track Drill rig R20T; Bucyrus Hydraulic track Drill rig R30C; Bucyrus Hydraulic track Drill rig R60; Cat MD5050; Cat MD5050 T; Cat MD5075; Bucyrus R20 | 2 2013–2014 | 161 |
| Bucyrus SCH5000 series hydraulic crawler drilling rig | Bucyrus Hydraulic track Drill rig SCH5000C / CL | 2 2013–2014 | 14 |
The numbers on the diagram correspond one to one with the rows below.
| No. | Component | Location | Applies to |
|---|---|---|---|
| 1 | Crawler assembly | Crawler assembly under the main frame | MD5075 |
| 2 | Feed beam | Inclined feed beam ahead of the machine | MD5075 |
| 3 | Operator cab | Operator cab behind the feed beam | MD5075 |
| Component |
|---|
| MD5050/5050T 2012 hydraulic drive track assembly |
| MD5050/5050T 2012 crawler drive hydraulic motor |
| MD5050/5050T 2012 track brake |
| MD5050/5050T 2012 towing disconnect mechanism |
| MD5050/5050T 2012 excavator type track roller |
| MD5050/5050T 2012 track shoe/tooth track |
| MD5050/5050T 2012 GLT track pin |
| MD5050/5050T 2012 GLT Track Bushing |
| MD5050/5050T 2012 GLT link seal |
| MD5050/5050T 2012 MD5050 track swing hydraulic cylinder |
| MD5050/5050T 2012 MD5050T swivel base |
| MD5050/5050T 2012 telescopic arm inner section |
| MD5050/5050T 2012 Feeding table and extension section |
| MD5050/5050T 2012 drilling rig positioner |
| MD5050/5050T 2012 UFH16 feed slot/assembly |
| MD5050/5050T 2012 Feed Chain |
| MD5050/5050T 2012 planetary feed drive gearbox |
| MD5050/5050T 2012 Replaceable sliding pads and adjustment parts |
| MD5050/5050T 2012 power drill |
| MD5050/5050T 2012 manual inclinometer |
| MD5050/5050T 2012 drill pipe thread lubrication device |
| MD5050/5050T 2012 drill pipe/starting drill rod |
| MD5050/5050T 2012 six-position turntable rod changer |
| MD5050/5050T 2012 rod changer door mechanism |
| MD5050/5050T 2012 double rod clamp |
| MD5050/5050T 2012 rod changer indexing/locking mechanism |
| MD5050/5050T 2012 lever changer pivot part |
| MD5050/5050T 2012 feed light |
| MD5050/5050T 2012 Tier3 four-cylinder diesel engine |
| MD5050/5050T 2012 28000 series power gearbox |
| MD5050/5050T 2012 dual element engine air filter |
| MD5050/5050T 2012 double port fuel tank |
| MD5050/5050T 2012 pressure compensated/load sensitive piston pump |
| MD5050/5050T 2012 hydraulic oil tank |
| MD5050/5050T 2012 hydraulic full flow filter |
| MD5050/5050T 2012 hydraulic oil injection pump |
| MD5050/5050T 2012 hydraulic test port |
| MD5050/5050T 2012 hydraulic pressure gauge/test joint |
| MD5050/5050T 2012 Smart Drill control system |
| MD5050/5050T 2012 cooler combination |
Models with the same components are grouped together; select a group to open its component table.
| Component | Location | Part / drawing no. |
|---|---|---|
| MD5050/5050T 2012 hydraulic drive track assembly | Page 5/21/25; T and ordinary version chassis are marked separately | |
| MD5050/5050T 2012 crawler drive hydraulic motor | Page 5/21 Hydraulic travel drive | |
| MD5050/5050T 2012 track brake | Page 21/25 Spring applied, hydraulically released disc type | |
| MD5050/5050T 2012 towing disconnect mechanism | Page 21towing disconnects, internal members not documented | |
| MD5050/5050T 2012 excavator type track roller | Page 5; non-specific dimensional drawing | |
| MD5050/5050T 2012 track shoe/tooth track | Page 5/21/25; MD5050 double/triple tooth source document conflict, T width 500mm | |
| MD5050/5050T 2012 GLT track pin | Page 5 Grease lubricated chain link pin | |
| MD5050/5050T 2012 GLT Track Bushing | Page 5 pin and bushing, no grade given | |
| MD5050/5050T 2012 GLT link seal | Page 5 Retaining Pin/Bush Inter-Grease | |
| MD5050/5050T 2012 MD5050 track swing hydraulic cylinder | Page 25 Ordinary MD5050 standard; does not set T | |
| MD5050/5050T 2012 MD5050T swivel base | Page 4/7/21/25; Cat312 chassis with 315slew, 360° | |
| MD5050/5050T 2012 telescopic arm inner section | Page 4/10/22; normal 0.6/0.61m writing, T1.2m | T104851 |
| MD5050/5050T 2012 Feeding table and extension section | Page 10/22; Page 25universal feed table | |
| MD5050/5050T 2012 drilling rig positioner | Page 25drill positioner | |
| MD5050/5050T 2012 UFH16 feed slot/assembly | Page 22/25 Hydraulic motor driven steel channel | |
| MD5050/5050T 2012 Feed Chain | Page 10 chain feed; do not borrow MD5075 chain distance | |
| MD5050/5050T 2012 planetary feed drive gearbox | Page 10planetary gearbox feed drive | 337785 |
| MD5050/5050T 2012 Replaceable sliding pads and adjustment parts | Page 22replaceable wear pads with adjusters | 401810 / 401811 / 401812 |
| MD5050/5050T 2012 power drill | Page 22/25power centralizer | 425777 |
| MD5050/5050T 2012 manual inclinometer | Page 10/22/25; separate from cab biaxial instrument | |
| MD5050/5050T 2012 drill pipe thread lubrication device | Page 22/25thread lubrication | 337393 |
| MD5050/5050T 2012 drill pipe/starting drill rod | Page 9/22/25; Length/diameter and configuration table, no supplementary materials | |
| MD5050/5050T 2012 six-position turntable rod changer | Page 9/22/25; 12ft/14ft configuration separated | 437523 |
| MD5050/5050T 2012 rod changer door mechanism | Page 9gate design maintains lever position | |
| MD5050/5050T 2012 double rod clamp | Page 9dual rod grippers | |
| MD5050/5050T 2012 rod changer indexing/locking mechanism | Page 9 precise positioning indexes and locks; internal sensors not listed | |
| MD5050/5050T 2012 lever changer pivot part | ||
| MD5050/5050T 2012 feed light | Page 10 Feed/Rod Changing Work Area | 416999 |
| MD5050/5050T 2012 Tier3 four-cylinder diesel engine | Page 11/21/25; This volume does not give the engine brand/model, and does not apply to Isuzu4HK from the 2011 volume | |
| MD5050/5050T 2012 28000 series power gearbox | Page 11/21 | 1609092 |
| MD5050/5050T 2012 dual element engine air filter | Page 11/21 | 1574558 |
| MD5050/5050T 2012 double port fuel tank | Page 11/21/25, 303L; page 11 83gal is different from table 80gal | 438130 |
| MD5050/5050T 2012 pressure compensated/load sensitive piston pump | Page 11/21/25, partial segment axial piston | 426390 |
| MD5050/5050T 2012 hydraulic oil tank | Page 11/21, 379L/100gal | 1513480 |
| MD5050/5050T 2012 hydraulic full flow filter | Page 21 5micron; without MD5075 3micron | 413495 |
| MD5050/5050T 2012 hydraulic oil injection pump | Page 19/21fill pump | 326670 |
| MD5050/5050T 2012 hydraulic test port | Page 21/25 On-board test interface; external test kit not listed | |
| MD5050/5050T 2012 hydraulic pressure gauge/test joint | Page 21gauges and test taps | |
| MD5050/5050T 2012 Smart Drill control system | Page 15/22/25; hydraulic/electronic wording differences reserved | |
| MD5050/5050T 2012 cooler combination | Page 11/21/25 ATAAC parallel/AKG four vertical sections with different descriptions reserved | 436005 |
| MD5050/5050T 2012 cooling fan assembly | Page 11/21/25 76cm, temperature compensation wind speed | |
| MD5050/5050T 2012 screw air compressor | Page 11/21/25; pressure values in different sections are not rewritten | 412885 |
| MD5050/5050T 2012 compressor poly chain belt drive | Page 11/21/25 driven directly by gearbox | |
| MD5050/5050T 2012 compressor air inlet check valve | Page 21/25 | V012571 |
| MD5050/5050T 2012 gas storage/separation combination tank | Page 11/21/25receiver-separator | |
| MD5050/5050T 2012 compressor dual filter element | Page 21dual filter elements | |
| MD5050/5050T 2012 HPR4519 hydraulic rock drill | Page 13/23/25 standard 19kW; optional HPR5123 replacement | 407596 / 4271580 |
| MD5050/5050T 2012 rock drill dual hydraulic variable speed swing motor | Page 13/23; only named configurations in this volume | 420250 |
| MD5050/5050T 2012 supercharged ROPS/FOPS cab | Page 14/22/25; Inappropriate material grade for certification standards | 4263579 |
| MD5050/5050T 2012 cab vibration reduction installation | Page 14 isolator mounted | |
| MD5050/5050T 2012 cab air filter | Page 14 | |
| MD5050/5050T 2012 cab heater/air conditioner | Page 14/22/25, the specific internal layout is not listed | V015610 |
| MD5050/5050T 2012 driver adjustable seat | Page 14/22 Six-way adjustment | 4259308 |
| MD5050/5050T 2012 joysticks on both sides of the seat | Page 14/22dual joysticks | 418687 |
| MD5050/5050T 2012 tinted safety glass window | Page 14/22; 3.07 is different from page 17 3.8m² | |
| MD5050/5050T 2012 Window Washer and Wiper | Page 14/22/25 three speed description | |
| MD5050/5050T 2012 reversing camera | The standard table on page 22 is not listed separately, and it is not presumed that all old machines are standard. | |
| MD5050/5050T 2012 Cab dual-axis inclination indicator | Page 14/22/25; not a manual instrument | |
| MD5050/5050T 2012 cab audio/radio | Page 14/22/25: AM/FM/CD differences in this volume are retained | 4271737 |
| MD5050/5050T 2012 cab 12V interface | Page 14/22 | |
| MD5050/5050T 2012 cab mirror | Page 14/17 Assisted Walking Observation | 418297 |
| MD5050/5050T 2012 cab safety belt | Page 25 | |
| MD5050/5050T 2012 dry dust collector assembly | Page 16/21/25; No model number is given for this volume | 432655 / 432656 |
| MD5050/5050T 2012 dust extraction fan | Page 16suction fan | |
| MD5050/5050T 2012 orifice dust cover | Page 16/21/25power pickup pot | 419066 |
| MD5050/5050T 2012 feed precleaner/separator | Page 16/21/25 | 413254 |
| MD5050/5050T 2012 wear-resistant vacuum hose | Page 16 127mm/5in is different from page 21 152.4mm/6in, reserved | |
| MD5050/5050T 2012 dust filter element | Page 16/21/25 Multiple components, replaceable from the bottom; quantity not documented | 419053 |
| MD5050/5050T 2012 filter backflush/exhaust valve | Page 16/21; internal valve list not included | 419058 |
| MD5050/5050T 2012 dust removal hydraulic drive motor | Page 21/25 | 432201 |
| MD5050/5050T 2012 Power Post Lubricator | Page 19/25power coupling greaser, separate from the optional automatic lubrication of the rock drill | |
| MD5050/5050T 2012 post grease reservoir | Page 19grease reservoir | |
| MD5050/5050T 2012 locking hood | Page 19/25; The entire cover can be removed by four pin points/lifting lugs | |
| MD5050/5050T 2012 hood door gas spring | Page 19gas springs | |
| MD5050/5050T 2012 hood fixing pin points and lifting lugs | Page 19four pinning points and lifting lugs, no load is given to the lifting lugs | |
| MD5050/5050T 2012 manual emergency valve group | Page 19 manual valve bank, power off operation | |
| MD5050/5050T 2012 hydraulic valve/valve block | Color identification on page 19, no presumption of quantity | |
| MD5050/5050T 2012 wall pipe joint | Page 19bulk head fitting | |
| MD5050/5050T 2012 hydraulic hose | Page 19 identified by diameter/length, no number recorded | |
| MD5050/5050T 2012 portable halogen lamp inside the hood | Page 19 | |
| MD5050/5050T 2012 rear facing external work light | Two on page 19; this volume only | |
| MD5050/5050T 2012 magnetic work light | Page 25 standard | |
| MD5050/5050T 2012 anti-slip steps/handrails | Page 17/23/25 | |
| MD5050/5050T 2012 fire extinguisher | Page 14/17 | 340612 |
| MD5050/5050T 2012 Feed emergency stop pull rope | Page 17/21/23swipe rope/cable | 433573 / 437447 |
| MD5050/5050T 2012 cab and feed emergency stop parts | Page 23 | |
| MD5050/5050T 2012 cab parking pedal | Page 23 | |
| MD5050/5050T 2012 transmission/work safety cover | Page 23guards | |
| MD5050/5050T 2012 tool box | Page 25; only cabinet name, does not declare internal tool list | |
| MD5050/5050T 2012 complete machine lifting ring | Page 25lifting eyes; non-given complete lifting kit | |
| MD5050/5050T 2012 telescopic main boom | Page 10 thick square tube and steel plate reinforced parts | T104857 |
| MD5050/5050T 2012 UFH Feed Loading Channel | Page 10 withstands torsional/thrust loads | |
| MD5075 2011 HPR4519 rock drill | Page 1, 19kW, internal parts not expanded | |
| MD5075 2011 38/45mm drill pipe | Page 1 drilling tool category, size not grade | |
| MD5075 2011 UFH14 chain feed assembly | Page 1; standard and optional UFH16 separated | |
| MD5075 2011 31.7mm pitch roller chain | Page 1; Pitch is not OEM number | |
| MD5075 2011 rock drill installation slide | Page 1drill mounting slide | |
| MD5075 2011 Replaceable wear-resistant sliding pad | Page 1 wear pads | |
| MD5075 2011 Feeding Station | Page 1 inline/offset/45° layout | |
| MD5075 2011 Scissor type burr | Page 1 scissors-type centralizer | |
| MD5075 2011 rod changer assembly | Page 1 five-digit/page 2 six-pole difference reserved, unified capacity not asserted | |
| MD5075 2011 hose reel | Page 1hosereel for maintenance reachable | |
| MD5075 2011 telescopic arm | Page 1, 3.81m is the version of this volume | |
| MD5075 2011 arm section | Page 1, extension 1.5m | |
| MD5075 2011 SmartDrill control system | Page 2, Monitor Hammer/Feed/Air/Swing Pressure | |
| MD5075 2011 CatC9 diesel engine | Page 2, TierIII six-cylinder 224kW; non-reverse sleeve 2012MD5050 | |
| MD5075 2011 power pump | Page 2 is driven by the engine through steel flexible coupling; the pump parts are not included in the detailed list | |
| MD5075 2011 engine dual element air filter | Page 2, with indicator | |
| MD5075 2011 fuel tank | Page 2, 492L/130gal only this volume | |
| MD5075 2011 screw compressor | Page 2, 163L/s; without borrowing other volumes, 250cfm | |
| MD5075 2011 compressor dual element filter | Page 2 | |
| MD5075 2011 pressure compensated/load sensitive piston pump | Page 3 | |
| MD5075 2011 hydraulic full flow tank filter | Page 3, 3micron | |
| MD5075 2011 sealed hydraulic oil tank | Page 3, 405L | |
| MD5075 2011 electric oil injection pump | Page 3 | |
| MD5075 2011 AKG cooler combination | Page 3 engine/hydraulic/compressor vertical parallel | |
| MD5075 2011 cooling fan assembly | Page 3, 1067mm | |
| MD5075 2011 HDE900 dust collector | Page 3 Original Model; not a part number | |
| MD5075 2011 precleaner and diverter cover | Page 3precleaner with diverter shield | |
| MD5075 2011 vacuum hose | Page 3 clearly indicates 12.7cm/5in; the aperture line has other unit errors that are not mixed in | |
| MD5075 2011 dust cover for the feed opening | page 3 pickup pot | |
| MD5075 2011 dust filter | Page 3 backflush cleaning; no specific number of filter elements is given | |
| MD5075 2011 ROPS/FOPS cab | Page 3, wider than MD5050; not all identical pieces | |
| MD5075 2011 heater/air conditioner | Page 3 | |
| MD5075 2011 adjustable seat | Page 3 | |
| MD5075 2011 Window Washer/Wiper | Page 3 | |
| MD5075 2011 dual-axis electronic indicator | Page 3 | |
| MD5075 2011 AM/FM/CD audio | Page 3 | |
| MD5075 2011 track shoes and track chain | Page 3Intertractor; do not borrow other manufacturers/sizes | |
| MD5075 2011 chassis side frame | Page 3design sideframes | |
| MD5075 2011 final drive assembly | Page 3final drive assemblies | |
| MD5075 2011 Hydraulic Release/Spring Applied Brake | Page 3 | |
| MD5075 2011 armrest seat joystick | Page 3armchair joystick | |
| MD5075 2011 electronic display system | Page 3 named operating data | |
| MD5075 2011 Engine/Rock Drill Hour Meter | Two items on page 3 are not equal to the real-time production time commitment | |
| MD5075 2011 voltmeter | Page 3 | |
| MD5075 2011 hydraulic oil temperature sight glass | Page 3 original sightglass, not corrected to display sensor | |
| MD5075 2011 Feed emergency stop pull rope | Page 3 | |
| MD5075 2011 cab emergency stop | Page 3 | |
| MD5075 2011 Pump Drive Steel Flexible Coupling | Page 2 Engine to Pump | |
| MD5050/5050T 2012 HPR5123 rock drill (replacement option) | Page 23/26 replaces HPR4519, 23kW; not both standard configurations at the same time | |
| MD5050/5050T 2012 51mm drill pipe (rod replacement configuration) | Page 22/23 replaces 45mm layout; does not supplement steel grade | |
| MD5050/5050T 2012 rod conversion kit (name only) | Page 26rod changer conversion kit, member unknown | 441217 |
| MD5050/5050T 2012 CE kit (name only) | Page 26CE kit, members unknown | |
| MD5050/5050T 2012 single tooth track shoe (option) | Page 26single bar grousers | |
| MD5050/5050T 2012 rock drill automatic lubrication system (option) | Page 13/23/26, grease tank/pump/timing board are named categories rather than a complete kit list | 411847 / 4248685 |
| MD5050/5050T 2012 automatic rock drill lubrication grease storage tank (option member) | page 13 grease reservoir; not the page 19 extension tank | |
| MD5050/5050T 2012 automatic rock drill lubrication pump (option member) | Page 13grease pump | |
| MD5050/5050T 2012 automatic rock drill lubrication timing plate (option member) | Page 13timer board | |
| MD5050/5050T 2012 oil for cold areas (optional) | Page 26Arctic oil; no viscosity or brand given | |
| MD5050/5050T 2012 cold area package (name only) | Page 26cold weather package, member unknown | |
| MD5050/5050T 2012 remote control walking (option) | ||
| MD5050/5050T 2012 rear water injection device and 113L pressure tank (optional) | Page 26, quantity not to be combined with additional water tanks | |
| MD5050/5050T 2012 additional 113L water tank (optional) | Page 26additional, not required for each machine | |
| MD5050/5050T 2012 12ft six-position rod changer (optional) | Page 26 replaces 14ft layout, not two sets are counted at the same time | |
| MD5050/5050T 2012 MD5050T knuckle arm (replacement option) | Page 26knuckle boom in lieu of extension boom; T version only | |
| MD5075 2011 HPR5123 rock drill (replacement option) | Page 1 replaces HPR4519, 23kW | |
| MD5075 2011 51mm drill pipe (option) | Page 1 | |
| MD5075 2011 UFH16 feed assembly (option) | Page 1 singlepass/two-pole arrangement, starting pole 6.1m; not considered a standard UFH14 member | |
| MD5075 2011 knuckle arm (option) | Page 1knuckle5.87m, replace telescopic arm | |
| MD5075 2011 Cable remote control box (optional) | Page 3, 6.1m tether cable; wireless not recommended |
| Component | Location | Part / drawing no. |
|---|---|---|
| Successor MD5090 Manufacturer Catalog HPR4519 Rock Drill | Named on page 1 of the manufacturer's catalog 19kW | |
| Successor MD5090 Manufacturer Catalog Optional HPR5123 Rock Drill | Page 1 named 23kW, independent option | |
| Successor of MD5090 Manufacturer Catalog Drill Pipe | Page 1 standard 38/45mm and optional 51mm are separated, no steel grade is included | |
| Successor MD5090 manufacturer catalog UFH14 chain feeding mechanism | Page 1 | |
| Successor of MD5090 Manufacturer's Catalog Roller Chain | Page 1 31.7mm pitch | |
| Successor MD5090 Manufacturer’s catalog Rock drill mounting slide | Page 1 | |
| Successor MD5090 Manufacturer Catalog Replaceable Wear Pad | Page 1 feeding mechanism | |
| Successor of MD5090 Manufacturer's Catalog Scissor type burr | Page 1 | |
| Successor of MD5090 Manufacturer Catalog Telescopic Drill Boom | Page 1 | |
| Successor of MD5090 Manufacturer Catalog Manual Rod Holder | Page 1 standard, five rods 3.66m; not all alternative options added together | |
| Successor of MD5090 Manufacturer's Catalog Linear Rod Changer | Optional on page 1, pole length/configuration separated | |
| Successor MD5090 Supplier Specifications Cat C9 Diesel Engine | Supplier Page 2, Tier III Six-Cylinder Turbo Air Aftercooling | |
| Successor MD5090 supplier specifications dual filter element air intake filter | Page 2 with indicator | 319258 |
| Successor MD5090 Supplier Specifications Fuel Tank | Page 2 492L | 441068 |
| Successor MD5090 Supplier Specifications Rotary Screw Compressor | Page 2 | |
| Successor MD5090 Supplier Specifications Compressor Dual Element Air Filter | Page 2 with indicator | |
| Successor MD5090 Supplier Specifications Pressure Compensated Axial Piston Main Pump | Page 2 has functions other than rotation/dust collection | 412307 |
| Successor MD5090 Supplier Specifications Rotary and Dust Collection Piston Pump | Page 2 pressure compensation | 412560 |
| Successor MD5090 Supplier Specifications High Pulse Spiral Wound Hose | Reinforcement layer material not listed on page 2 | |
| Successor MD5090 Supplier Specifications In-tank full-flow filter | Page 2 10µm | |
| Successor MD5090 Supplier Specifications Sealed Pressurized Hydraulic Tank | Page 2 405L | 441066 |
| Successor MD5090 supplier specifications manual oil charge pump and filter | Page 2 10µm filter | 326670 |
| Successor MD5090 Supplier Specifications Engine Hydraulic and Compressor Cooler Group | Page 2 side by side vertically | |
| Successor MD5090 supplier specifications cooling fan assembly | Page 2 | |
| Successor MD5090 Supplier Specifications HDE900 Dust Collector | Page 3, supplier rearranges text | |
| Successor MD5090 Supplier Specifications Vacuum Hose | Page 3 127mm | |
| Successor MD5090 supplier specifications feed beam pre-cleaner and dust suction port | Page 3 | |
| Successor MD5090 Supplier Specifications Backflush Dust Cleaning and Filtration Mechanism | Not all filters are listed on page 3 | |
| Successor MD5090 supplier specifications track chain and three-rib track shoes | Page 3 | V005654 |
| Successor MD5090 Supplier Specifications Track Side Frame | Page 3 | |
| Successor MD5090 Supplier Specifications Final Drive Assembly | Page 3 | V005637 |
| Successor MD5090 Supplier Specifications Spring Applied Hydraulic Release Brake | Page 3 | |
| Successor MD5090 Supplier Specifications Pressure Compensated Flow and Directional Valve | Named control agency on page 3 | |
| Successor MD5090 Supplier Specifications feed beam Emergency Stop Cable | Page 3 | |
| Successor MD5090 Supplier Specifications Travel and Drill Boom Console | Page 3 | |
| Successor MD5090 Supplier Specifications Engine Direct Drive Pump Flexible Coupling | Supplier Page 2 |
| Component | Location | Part / drawing no. |
|---|---|---|
| Crawler walking assembly | lower frame | 413574 |
| Spring-operated disc brake | Travel braking system | |
| Four-pump hydraulic system | Hydraulic drive system | |
| Hydraulic oil filter | Hydraulic oil circuit | 1400449 / 99738 |
| Screw air compressor | Air supply system | 1157263 / 420511 |
| Dry dust collector | Orifice dust collection system | 414400 / 419077 |
| Wear-resistant vacuum hose | Dust collection suction circuit | |
| Hydraulic impact rock drill | Drilling into the propelling beam | 412091 |
| Rock drill bushing | Inside the rock drill | 1419809 / 1419810 |
| Accumulator assembly | Rock drill hydraulic system | |
| Drill pipe changer | Propulsion system | |
| Powered rod centralizer | On the propulsion beam | 335232 |
| Replaceable wear pads | Only listed for C-type propulsion system | 1414807 / 1420798 / 415245 / 415246 |
| Automatic lubrication pump and grease storage tank | Optional rock drill automatic lubrication system |
The Bucyrus Hydraulic Track Drills (R / 345 / SCH5000) covers 3 models: Bucyrus 345 series hydraulic crawler drilling rig, Bucyrus R series hydraulic crawler drilling rig, Bucyrus SCH5000 series hydraulic crawler drilling rig. Former and renamed designations are listed in the models table on this page.
The Bucyrus Hydraulic Track Drills (R / 345 / SCH5000) is also documented under these designations: Bucyrus Hydraulic track Drill rig 345, Bucyrus Hydraulic track Drill rig 345S, Cat MD5090, Bucyrus R series hydraulic crawler drilling rig, Bucyrus Hydraulic track Drill rig R20C, Bucyrus Hydraulic track Drill rig R20T, Bucyrus Hydraulic track Drill rig R30C, Bucyrus Hydraulic track Drill rig R60, Cat MD5050, Cat MD5050 T, Cat MD5075, Bucyrus R20, Bucyrus Hydraulic track Drill rig SCH5000C / CL.
The Bucyrus Hydraulic Track Drills (R / 345 / SCH5000) is listed under the Bucyrus brand as: Hydraulic crawler drilling rig. Period: 2 2013–2014. Status: Historical model.
211 components are recorded, including: Successor MD5090 Manufacturer Catalog HPR4519 Rock Drill, Successor MD5090 Manufacturer Catalog Optional HPR5123 Rock Drill, Successor of MD5090 Manufacturer Catalog Drill Pipe, Successor MD5090 manufacturer catalog UFH14 chain feeding mechanism, Successor of MD5090 Manufacturer's Catalog Roller Chain, Successor MD5090 Manufacturer’s catalog Rock drill mounting slide, Successor MD5090 Manufacturer Catalog Replaceable Wear Pad, Successor of MD5090 Manufacturer's Catalog Scissor type burr and more. The full list with locations is in the components table on this page.
Successor MD5090 supplier specifications dual filter element air intake filter: 319258, Successor MD5090 Supplier Specifications Fuel Tank: 441068, Successor MD5090 Supplier Specifications Pressure Compensated Axial Piston Main Pump: 412307, Successor MD5090 Supplier Specifications Rotary and Dust Collection Piston Pump: 412560, Successor MD5090 Supplier Specifications Sealed Pressurized Hydraulic Tank: 441066, Successor MD5090 supplier specifications manual oil charge pump and filter: 326670, Successor MD5090 supplier specifications track chain and three-rib track shoes: V005654, Successor MD5090 Supplier Specifications Final Drive Assembly: V005637, MD5050/5050T 2012 telescopic arm inner section: T104851, MD5050/5050T 2012 planetary feed drive gearbox: 337785.
Model-specific components with their own page: MD5050/5050T 2012 HPR5123 rock drill (replacement option), MD5050/5050T 2012 51mm drill pipe (rod replacement configuration), MD5050/5050T 2012 rod conversion kit (name only), MD5050/5050T 2012 CE kit (name only), MD5050/5050T 2012 single tooth track shoe (option), MD5050/5050T 2012 rock drill automatic lubrication system (option), MD5050/5050T 2012 automatic rock drill lubrication grease storage tank (option member), MD5050/5050T 2012 automatic rock drill lubrication pump (option member) and more (21 in total).
Bucyrus 345 → Cat / Unit Rig MD5090, Bucyrus 345S → Cat / Unit Rig MD5090, Bucyrus R20C → Cat / Unit Rig MD5050, Bucyrus R20T → Cat / Unit Rig MD5050 T.
Send us a drawing or sample and tell us the equipment model and part name.
Provide the equipment model, drawing for engineering review and quotation. If service life or wear is a concern, describe the operating conditions as well.
Or contact us directly: +86 156 3797 3199
zzx@anranst.com
ANRANST provides customers worldwide with engineering assessment, production at certified foundries to the customer technical requirements, quality control and finished-part delivery for custom wear parts and industrial spares, with scope to support other custom industrial parts.
We review mating surfaces and interface dimensions and assess material, heat treatment and manufacturing feasibility.
Material grades and heat-treatment processes are specified order by order, stated in the technical agreement and tracked through production.
Drawing confirmation, material and process control, production tracking, inspection and acceptance coordination.
We coordinate manufacturing, quality confirmation, packaging and delivery of complete finished parts in a workable, closed-loop supply process.
Provide the existing model, drawings, drawing, materials or operating conditions so we can identify the appropriate technical review and supply route.
Submit an Enquiry