IsaMill: Wet-End and Nameplate Identification

Retain the M prefix and full numeric designation. Public production-table identities: M100; M500; M1,000; M3,000; M5,000; M7,500; M10,000; M15,000; M20,000; M50,000. M1,000 is independently written in the installation caption on the same manufacturer page.

OEM series guide

Identify the installed design before enquiry

IsaMill is a horizontal, high-intensity stirred mill. Slurry passes through successive grinding discs, while an internal product separator retains media at the discharge end. Glencore Technology provides process support and NETZSCH contributes mill manufacturing and design expertise. Identify your parts: send nameplate.

IsaMill

Wet-end and wear-part identification

Retain the M prefix and full numeric designation. Public production-table identities: M100; M500; M1,000; M3,000; M5,000; M7,500; M10,000; M15,000; M20,000; M50,000. M1,000 is independently written in the installation caption on the same manufacturer page. source

  • Identify each grinding disc and its reusable hub with shaft position and connection details. [source]
  • Record the split-shell slip-in liner and feed/discharge flange wear components by installed position. [source]
  • Identify the discharge-end product separator and its media-return arrangement from the assembly drawing. [source]
  • Record shaft-entry sealing interfaces separately from grinding discs and shell lining. [source]

Nameplate identification

Request clear mill and drive nameplates: manufacturer, complete mill model and suffix, serial/equipment number, year, rated power and speed where stated. Identify your parts / send nameplate.

disc and hub positions; shell-liner construction; product-separator assembly; shaft interfaces; feed/discharge flange geometry

Identify your parts / send nameplate

Identify your parts / send nameplate

Send the full nameplate photo, model designation, serial number and photographs of the installed wear parts. ANRANST quotes aftermarket wear parts after identification; no interchange numbers are published.

اطلب عرض سعر

أو تواصل معنا مباشرة: +86 156 3797 3199
zzx@anranst.com

خدمات التصنيع في الصين

من التقييم الفني إلى تسليم القطع الجاهزة

تقدّم ANRANST لعملائها حول العالم التقييم الهندسي والإنتاج في مسابك معتمدة وفق المتطلبات الفنية للعميل ومراقبة الجودة وتسليم القطع الجاهزة لقطع التآكل المخصّصة وقطع الغيار الصناعية، مع إمكانية دعم قطع صناعية مخصّصة أخرى.

يرجى تقديم العلامة التجارية للمعدة، والطراز الكامل والرقم التسلسلي، واسم القطعة، ورقم القطعة أو رقم الرسم، وإصدار الرسم، والكمية، ومتطلبات المادة وظروف التشغيل. إذا لم تتوفر بيانات التعريف، فأرسل صورًا والأبعاد الرئيسية.

أرسل استفساراً