IsaMill: Wet-End and Nameplate Identification

Retain the M prefix and full numeric designation. Public production-table identities: M100; M500; M1,000; M3,000; M5,000; M7,500; M10,000; M15,000; M20,000; M50,000. M1,000 is independently written in the installation caption on the same manufacturer page.

OEM series guide

Identify the installed design before enquiry

IsaMill is a horizontal, high-intensity stirred mill. Slurry passes through successive grinding discs, while an internal product separator retains media at the discharge end. Glencore Technology provides process support and NETZSCH contributes mill manufacturing and design expertise. Identify your parts: send nameplate.

IsaMill

Wet-end and wear-part identification

Retain the M prefix and full numeric designation. Public production-table identities: M100; M500; M1,000; M3,000; M5,000; M7,500; M10,000; M15,000; M20,000; M50,000. M1,000 is independently written in the installation caption on the same manufacturer page. source

  • Identify each grinding disc and its reusable hub with shaft position and connection details. [source]
  • Record the split-shell slip-in liner and feed/discharge flange wear components by installed position. [source]
  • Identify the discharge-end product separator and its media-return arrangement from the assembly drawing. [source]
  • Record shaft-entry sealing interfaces separately from grinding discs and shell lining. [source]

Nameplate identification

Request clear mill and drive nameplates: manufacturer, complete mill model and suffix, serial/equipment number, year, rated power and speed where stated. Identify your parts / send nameplate.

disc and hub positions; shell-liner construction; product-separator assembly; shaft interfaces; feed/discharge flange geometry

Identify your parts / send nameplate

Identify your parts / send nameplate

Send the full nameplate photo, model designation, serial number and photographs of the installed wear parts. ANRANST quotes aftermarket wear parts after identification; no interchange numbers are published.

Demander un devis

Ou contactez-nous directement : +86 156 3797 3199
zzx@anranst.com

Manufacturing Services in China

From Technical Assessment to Finished-Part Delivery

ANRANST provides customers worldwide with engineering assessment, production at certified foundries to drawing, quality control and finished-part delivery for custom wear parts and industrial spares, with scope to support other custom industrial parts.

Veuillez fournir la marque de l’équipement, le modèle complet et le numéro de série, le nom de la pièce, sa référence ou le numéro du plan, l’indice de révision du plan, la quantité, les exigences relatives au matériau et les conditions de service. Si ces identifiants ne sont pas disponibles, envoyez des photographies et les dimensions principales.

Submit an Enquiry