- Identify each grinding disc and its reusable hub with shaft position and connection details. [source]
- Record the split-shell slip-in liner and feed/discharge flange wear components by installed position. [source]
- Identify the discharge-end product separator and its media-return arrangement from the assembly drawing. [source]
- Record shaft-entry sealing interfaces separately from grinding discs and shell lining. [source]
IsaMill: Wet-End and Nameplate Identification
Retain the M prefix and full numeric designation. Public production-table identities: M100; M500; M1,000; M3,000; M5,000; M7,500; M10,000; M15,000; M20,000; M50,000. M1,000 is independently written in the installation caption on the same manufacturer page.
OEM series guide
Identify the installed design before enquiry
IsaMill is a horizontal, high-intensity stirred mill. Slurry passes through successive grinding discs, while an internal product separator retains media at the discharge end. Glencore Technology provides process support and NETZSCH contributes mill manufacturing and design expertise. Identify your parts: send nameplate.
IsaMill
Wet-end and wear-part identification
Retain the M prefix and full numeric designation. Public production-table identities: M100; M500; M1,000; M3,000; M5,000; M7,500; M10,000; M15,000; M20,000; M50,000. M1,000 is independently written in the installation caption on the same manufacturer page. source
Nameplate identification
Request clear mill and drive nameplates: manufacturer, complete mill model and suffix, serial/equipment number, year, rated power and speed where stated. Identify your parts / send nameplate.
disc and hub positions; shell-liner construction; product-separator assembly; shaft interfaces; feed/discharge flange geometry