Warman SP and SPR Vertical Sump Pumps

3 models

Warman SP and SPR Vertical Sump Pumps
Warman SP and SPR Vertical Sump Pumps (2)
Warman
WarmanBrand
Historical modelStatus
Warman

Models and Historical Names in This Series

Select a model to jump to its component table; former and renamed designations are listed under “Historical names / renamings”.

ModelHistorical names / renamingsComponents
Warman SPSP; SP40; SP150; SP2005
Warman SPRSPR; SPR40; SPR100; SPR1505
Warman WBVWBV; WBV40; WBV1506
Warman

Numbered Components

The numbers on the diagram correspond one to one with the rows below.

No.ComponentLocationApplies to
1ImpellerImpeller inside lower wet endWarman SP (OEM Fig.1)
2Pump casingWet-end casing surrounding impellerWarman SP (OEM Fig.1)
3Cantilever pump shaftCentral shaft from upper drive end to lower impellerWarman SP (OEM Fig.1)
4Intake strainerIntake strainer beneath wet endWarman SP (OEM Fig.1)
5Discharge pipeVertical discharge passage at rightWarman SP (OEM Fig.1)
6Suction coverSuction cover below impellerWarman SP (OEM Fig.1)
Warman

Components by Model

Models with the same components are grouped together; select a group to open its component table.

Warman SP, Warman SPR5 items

Models: Warman SP, Warman SPR

No.Component
1Impeller
2Pump casing
3Model-specific component
4Model-specific component
5Liquid discharge pipe
Warman WBV6 items
No.Component
1Impeller
2Pump casing
3Model-specific component
4Model-specific component
5Liquid discharge pipe
6Model-specific component

Frequently asked questions

Which models does the Warman SP and SPR Vertical Sump Pumps cover?

The Warman SP and SPR Vertical Sump Pumps covers 3 models: Warman SP, Warman SPR, Warman WBV. Former and renamed designations are listed in the models table on this page.

What other names or designations is the Warman SP and SPR Vertical Sump Pumps known by?

The Warman SP and SPR Vertical Sump Pumps is also documented under these designations: Warman SP, SP, SP40, SP150, SP200, Warman SPR, SPR, SPR40, SPR100, SPR150, Warman WBV, WBV, WBV40, WBV150.

Which brand and type of equipment is the Warman SP and SPR Vertical Sump Pumps?

The Warman SP and SPR Vertical Sump Pumps is listed under the Warman brand. Status: Historical model.

Which components and wear parts are recorded for the Warman SP and SPR Vertical Sump Pumps?

6 components are recorded, including: Impeller, Pump casing, Liquid discharge pipe and more. The full list with locations is in the components table on this page.

How do I enquire about parts for the Warman SP and SPR Vertical Sump Pumps?

Send us a drawing or sample and tell us the equipment model and part name.

Send us a drawing or sample and tell us the equipment model and part name

Provide the equipment model, drawing for engineering review and quotation. If service life or wear is a concern, describe the operating conditions as well.

Equipment Brand and ModelDrawingDrawing or DimensionsCurrent MaterialPhotographs of Failed PartsTarget Service LifeOperating Conditions
Request a Quote

Or contact us directly: +86 156 3797 3199
zzx@anranst.com

Manufacturing Services in China

From Technical Assessment to Finished-Part Delivery

ANRANST provides customers worldwide with engineering assessment, production at certified foundries to the customer technical requirements, quality control and finished-part delivery for custom wear parts and industrial spares, with scope to support other custom industrial parts.

01

Drawing and Engineering Review

We review mating surfaces and interface dimensions and assess material, heat treatment and manufacturing feasibility.

02

Material and Heat-Treatment Specification

Material grades and heat-treatment processes are specified order by order, stated in the technical agreement and tracked through production.

03

Quality Control

Drawing confirmation, material and process control, production tracking, inspection and acceptance coordination.

04

Finished-Part Delivery

We coordinate manufacturing, quality confirmation, packaging and delivery of complete finished parts in a workable, closed-loop supply process.

Provide the existing model, drawings, drawing, materials or operating conditions so we can identify the appropriate technical review and supply route.

Submit an Enquiry