2026-10-04 · 12 models
Select a model to jump to its component table; former and renamed designations are listed under “Historical names / renamings”.
| Model | Historical names / renamings | Period | Components |
|---|---|---|---|
| Nordberg NP1110 | NP1110 | 6 | |
| Nordberg NP1110M | NP1110M | 6 | |
| Nordberg NP1213 | NP1213 | 6 | |
| Nordberg NP1213M | NP1213M | 6 | |
| Nordberg NP13 | NP13 | 2026-10-04 | 6 |
| Nordberg NP1313 | NP1313 | 6 | |
| Nordberg NP1315 | NP1315 | 6 | |
| Nordberg NP1415 | NP1415 | 2026-10-04 | 6 |
| Nordberg NP15 | NP15 | 2026-10-04 | 6 |
| Nordberg NP1620 | NP1620 | 2026-10-04 | 6 |
| Nordberg NP20 | NP20 | 2026-10-04 | 6 |
| Nordberg NP2023 | NP2023 | 6 |
The numbers on the diagram correspond one to one with the rows below.
| No. | Component | Location | Applies to |
|---|---|---|---|
| 1 | Blow bar | Radial working bar at the rotor periphery | NP Series OEM two-impact-plate design; dimensions not specified |
| 2 | Breaker plate liner | Working face of the upper breaker plate | NP Series OEM two-impact-plate design; dimensions not specified |
| 3 | Side liner | Side wall of the crushing chamber | NP Series OEM two-impact-plate design; dimensions not specified |
| 4 | Rotor | Rotor body in the lower chamber | NP Series OEM two-impact-plate design; dimensions not specified |
| 5 | Rotor shaft | Exposed shaft center on the front side | NP Series OEM two-impact-plate design; dimensions not specified |
| 6 | Blow bar locking device | Locking device at the blow bar root | NP Series OEM two-impact-plate design; dimensions not specified |
Models with the same components are grouped together; select a group to open its component table.
Models: Nordberg NP1110, Nordberg NP1110M, Nordberg NP1213, Nordberg NP1213M, Nordberg NP13, Nordberg NP1313, Nordberg NP1315, Nordberg NP1415, Nordberg NP15, Nordberg NP1620, Nordberg NP20, Nordberg NP2023
| No. | Component | Location |
|---|---|---|
| 1 | Model-specific component | |
| 2 | Impact liner | Working face of the impact frame |
| 3 | Model-specific component | |
| 4 | Rotor | Center of the crushing chamber |
| 5 | Rotor shaft | |
| 6 | Model-specific component |
The NP covers 12 models: Nordberg NP1110, Nordberg NP1110M, Nordberg NP1213, Nordberg NP1213M, Nordberg NP13, Nordberg NP1313, Nordberg NP1315, Nordberg NP1415, Nordberg NP15, Nordberg NP1620, Nordberg NP20, Nordberg NP2023. Former and renamed designations are listed in the models table on this page.
The NP is also documented under these designations: Nordberg NP1110, NP1110, Nordberg NP1110M, NP1110M, Nordberg NP1213, NP1213, Nordberg NP1213M, NP1213M, Nordberg NP13, NP13, Nordberg NP1313, NP1313, Nordberg NP1315, NP1315.
The NP is listed under the Nordberg brand. Period: 2026-10-04. Status: Historical model.
6 components are recorded, including: Impact liner, Rotor, Rotor shaft and more. The full list with locations is in the components table on this page.
Send us a drawing or sample and tell us the equipment model and part name.
Provide the equipment model, drawing for engineering review and quotation. If service life or wear is a concern, describe the operating conditions as well.
Or contact us directly: +86 156 3797 3199
zzx@anranst.com
ANRANST provides customers worldwide with engineering assessment, production at certified foundries to the customer technical requirements, quality control and finished-part delivery for custom wear parts and industrial spares, with scope to support other custom industrial parts.
We review mating surfaces and interface dimensions and assess material, heat treatment and manufacturing feasibility.
Material grades and heat-treatment processes are specified order by order, stated in the technical agreement and tracked through production.
Drawing confirmation, material and process control, production tracking, inspection and acceptance coordination.
We coordinate manufacturing, quality confirmation, packaging and delivery of complete finished parts in a workable, closed-loop supply process.
Provide the existing model, drawings, drawing, materials or operating conditions so we can identify the appropriate technical review and supply route.
Submit an Enquiry