6 models
Select a model to jump to its component table; former and renamed designations are listed under “Historical names / renamings”.
| Model | Components |
|---|---|
| МК-3,25х4 | 4 |
| МК-5х4 | 4 |
| МПМБ-3,25х4 | 4 |
| МПМН-4х4-ТД | 4 |
| МПМН-5х4 | 4 |
| ЦШ-4х4Д | 4 |
The numbers on the diagram correspond one to one with the rows below.
| No. | Component | Location | Applies to |
|---|---|---|---|
| 1 | Friction pulley | Left friction pulley driving the hoisting ropes | МК-3,25х4;МК-5х4;МПМБ-3,25х4;МПМН-4х4-ТД;МПМН-5х4;ЦШ-4х4Д |
| 2 | Brake system | Brake assemblies on both sides of the friction pulley | МК-3,25х4;МК-5х4;МПМБ-3,25х4;МПМН-4х4-ТД;МПМН-5х4;ЦШ-4х4Д |
| 3 | Brake control system | Control cabinet in front of the friction pulley | МК-3,25х4;МК-5х4;МПМБ-3,25х4;МПМН-4х4-ТД;МПМН-5х4;ЦШ-4х4Д |
| 4 | Machine motion controls | Shaft-end monitoring and operator console | МК-3,25х4;МК-5х4;МПМБ-3,25х4;МПМН-4х4-ТД;МПМН-5х4;ЦШ-4х4Д |
| 5 | Safeguards | Protective barriers beside the friction pulley and motors | МК-3,25х4;МК-5х4;МПМБ-3,25х4;МПМН-4х4-ТД;МПМН-5х4;ЦШ-4х4Д |
| 6 | Hoisting electric motors | Electric drive at the right | МК-3,25х4;МК-5х4;МПМБ-3,25х4;МПМН-4х4-ТД;МПМН-5х4;ЦШ-4х4Д |
| 7 | Drive mechanism | Central geared drive | МК-3,25х4;МК-5х4;МПМБ-3,25х4;МПМН-4х4-ТД;МПМН-5х4;ЦШ-4х4Д |
| 8 | Lubrication station | Lubrication unit below the drive | МК-3,25х4;МК-5х4;МПМБ-3,25х4;МПМН-4х4-ТД;МПМН-5х4;ЦШ-4х4Д |
| Component |
|---|
| Guide pulley |
| Main shaft |
Models with the same components are grouped together; select a group to open its component table.
Models: МК-3,25х4, МК-5х4, МПМБ-3,25х4, МПМН-4х4-ТД, МПМН-5х4, ЦШ-4х4Д
| No. | Component |
|---|---|
| 1 | Model-specific component |
| 2 | Brake system |
| Model-specific component | |
| Main shaft |
The Multirope friction mine winders covers 6 models: МК-3,25х4, МК-5х4, МПМБ-3,25х4, МПМН-4х4-ТД, МПМН-5х4, ЦШ-4х4Д. Former and renamed designations are listed in the models table on this page.
The Multirope friction mine winders is also documented under these designations: МК-3,25х4, МК-5х4, МПМБ-3,25х4, МПМН-4х4-ТД, МПМН-5х4, ЦШ-4х4Д.
The Multirope friction mine winders is listed under the NKMZ brand. Status: Historical model.
4 components are recorded, including: Brake system, Main shaft and more. The full list with locations is in the components table on this page.
Send us a drawing or sample and tell us the equipment model and part name.
Provide the equipment model, drawing for engineering review and quotation. If service life or wear is a concern, describe the operating conditions as well.
Or contact us directly: +86 156 3797 3199
zzx@anranst.com
ANRANST provides customers worldwide with engineering assessment, production at certified foundries to the customer technical requirements, quality control and finished-part delivery for custom wear parts and industrial spares, with scope to support other custom industrial parts.
We review mating surfaces and interface dimensions and assess material, heat treatment and manufacturing feasibility.
Material grades and heat-treatment processes are specified order by order, stated in the technical agreement and tracked through production.
Drawing confirmation, material and process control, production tracking, inspection and acceptance coordination.
We coordinate manufacturing, quality confirmation, packaging and delivery of complete finished parts in a workable, closed-loop supply process.
Provide the existing model, drawings, drawing, materials or operating conditions so we can identify the appropriate technical review and supply route.
Submit an Enquiry