11 models
Select a model to jump to its component table; former and renamed designations are listed under “Historical names / renamings”.
The numbers on the diagram correspond one to one with the rows below.
| No. | Component | Location | Applies to |
|---|---|---|---|
| 1 | Conveyor belt | Carrying run of the telescoping conveyor | 33-30130;33-30150;33-36130;33-36136LP;33-36150;33-36170;33-36190;33-42150;33-42170;33-42190 |
| 1 | Conveyor belt | Carrying run of the telescoping transfer conveyor | 33-36125T |
| 2 | Conveyor frame | Truss structure along the conveyor | 33-30130;33-30150;33-36130;33-36136LP;33-36150;33-36170;33-36190;33-42150;33-42170;33-42190 |
| 2 | Telescoping conveyor section | Overlap between the extending conveyor and main truss | 33-36125T |
| 3 | Luffing support | Elevating support beneath the inclined conveyor | 33-30130;33-30150;33-36130;33-36136LP;33-36150;33-36170;33-36190;33-42150;33-42170;33-42190 |
| 3 | Tracked undercarriage | Tracked travel assembly beneath the main support | 33-36125T |
| 4 | Radial travel wheel assembly | Wheeled travel assembly beneath the main support | 33-30130;33-30150;33-36130;33-36136LP;33-36150;33-36170;33-36190;33-42150;33-42170;33-42190 |
| Component |
|---|
| Idler roller |
| Telescoping section |
| Cam-arm linkage |
| Counterweight |
| Belt Cleaner / Scraper |
| Feed Hopper Liner |
Models with the same components are grouped together; select a group to open its component table.
Models: 33-30130, 33-30150, 33-36130, 33-36136LP, 33-36150, 33-36170, 33-36190, 33-42150, 33-42170, 33-42190
| No. | Component | Location |
|---|---|---|
| 1 | Conveyor Belt | |
| 2 | Conveyor Frame | Support beneath the conveyor belt and idlers |
| Conveyor Rollers | ||
| Expansion joint | Telescopic section inside the main conveyor frame | |
| Cam arm link | Connection between the chassis and the conveyor frame | |
| Counterweight | Chassis balancing position |
| No. | Component | Location |
|---|---|---|
| 1 | Conveyor Belt | |
| 2 | Telescopic conveyor section | Telescopic section inside the main frame |
| 3 | Luffing bracket | Support beneath the conveyor frame |
| 3 | Crawler chassis | Beneath the mobile platform |
| Conveyor Rollers | ||
| Belt Cleaner / Scraper | ||
| Feed Hopper Liner |
The SuperStacker covers 11 models: 33-30130, 33-30150, 33-36125T, 33-36130, 33-36136LP, 33-36150, 33-36170, 33-36190, 33-42150, 33-42170, 33-42190. Former and renamed designations are listed in the models table on this page.
The SuperStacker is also documented under these designations: 33-30130, 33-30150, 33-36125T, 33-36130, 33-36136LP, 33-36150, 33-36170, 33-36190, 33-42150, 33-42170, 33-42190.
The SuperStacker is listed under the Kolberg-Pioneer brand. Status: Historical model.
11 components are recorded, including: Conveyor Belt, Conveyor Rollers, Belt Cleaner / Scraper, Feed Hopper Liner, Conveyor Frame, Expansion joint, Cam arm link, Counterweight and more. The full list with locations is in the components table on this page.
Model-specific components with their own page: Conveyor Frame, Expansion joint, Cam arm link, Counterweight, Telescopic conveyor section, Luffing bracket, Crawler chassis (7 in total).
Send us a drawing or sample and tell us the equipment model and part name.
Provide the equipment model, drawing for engineering review and quotation. If service life or wear is a concern, describe the operating conditions as well.
Or contact us directly: +86 156 3797 3199
zzx@anranst.com
ANRANST provides customers worldwide with engineering assessment, production at certified foundries to the customer technical requirements, quality control and finished-part delivery for custom wear parts and industrial spares, with scope to support other custom industrial parts.
We review mating surfaces and interface dimensions and assess material, heat treatment and manufacturing feasibility.
Material grades and heat-treatment processes are specified order by order, stated in the technical agreement and tracked through production.
Drawing confirmation, material and process control, production tracking, inspection and acceptance coordination.
We coordinate manufacturing, quality confirmation, packaging and delivery of complete finished parts in a workable, closed-loop supply process.
Provide the existing model, drawings, drawing, materials or operating conditions so we can identify the appropriate technical review and supply route.
Submit an Enquiry