Which models does the Series 9000 DWS Dewatering screen cover?
The Series 9000 DWS Dewatering screen covers 6 models: DWS 38, DWS 410, DWS 513, DWS 613, DWS 716, DWS 816. Former and renamed designations are listed in the models table on this page.
Dewatering screen · 6 models


The numbers on the diagram correspond one to one with the rows below.
| No. | Component | Location |
|---|---|---|
| 1 | Polyurethane screening panel | Dewatering deck inside the screen box |
| 2 | Side liner | Working surfaces on the inside of the sidewalls |
| 3 | Vibrating motor | Twin vibrating motors on the top motor bridge |
| 4 | Discharge weir | Discharge retaining edge at the front of the deck |
Models with the same components are grouped together; select a group to open its component table.
Models: DWS 38, DWS 410, DWS 513, DWS 613, DWS 716, DWS 816
| No. | Component | Location |
|---|---|---|
| 1 | Polyurethane Panel / PU Screen | |
| 2 | Model-specific component | |
| 3 | Exciting Electric motor | Motor bridge at the top of the screen box |
| 4 | Discharge weir | Discharge end of the screen surface |
The Series 9000 DWS Dewatering screen covers 6 models: DWS 38, DWS 410, DWS 513, DWS 613, DWS 716, DWS 816. Former and renamed designations are listed in the models table on this page.
The Series 9000 DWS Dewatering screen is also documented under these designations: DWS 38, DWS 410, DWS 513, DWS 613, DWS 716, DWS 816.
The Series 9000 DWS Dewatering screen is listed under the Kolberg-Pioneer brand as: Dewatering screen. Status: Historical model.
4 components are recorded, including: Polyurethane Panel / PU Screen, Exciting Electric motor, Discharge weir and more. The full list with locations is in the components table on this page.
Model-specific components with their own page: Exciting Electric motor, Discharge weir (2 in total).
Send us a drawing or sample and tell us the equipment model and part name.
Provide the equipment model, drawing for engineering review and quotation. If service life or wear is a concern, describe the operating conditions as well.
Or contact us directly: +86 156 3797 3199
zzx@anranst.com
ANRANST provides customers worldwide with engineering assessment, production at certified foundries to the customer technical requirements, quality control and finished-part delivery for custom wear parts and industrial spares, with scope to support other custom industrial parts.
We review mating surfaces and interface dimensions and assess material, heat treatment and manufacturing feasibility.
Material grades and heat-treatment processes are specified order by order, stated in the technical agreement and tracked through production.
Drawing confirmation, material and process control, production tracking, inspection and acceptance coordination.
We coordinate manufacturing, quality confirmation, packaging and delivery of complete finished parts in a workable, closed-loop supply process.
Provide the existing model, drawings, drawing, materials or operating conditions so we can identify the appropriate technical review and supply route.
Submit an Enquiry