What other names or designations is the Thickener known by?
The Thickener is also documented under these designations: Denver thickener, Thickener 12×8, Denver Thickener 4 X 6, Denver6ft.
Thickener · 1945 · 1 model


Select a model to jump to its component table; former and renamed designations are listed under “Historical names / renamings”.
| Model | Historical names / renamings | Period | Components |
|---|---|---|---|
| Denver thickener | Thickener 12×8; Denver Thickener 4 X 6; Denver6ft; Denver Thickener | 1945 | 17 |
The numbers on the diagram correspond one to one with the rows below.
| No. | Component | Location | Applies to |
|---|---|---|---|
| 1 | Tank | Central cylindrical tank | Denver 6 ft Thickener |
| 2 | Bridge | Bridge above tank | Denver 6 ft Thickener |
| 3 | Drive unit | Drive unit on bridge | Denver 6 ft Thickener |
| Component |
|---|
| N1850 tank (actual stock) |
| N1850 built-in overflow tank (actual stock) |
| N1850 bottom tapered outlet (actual stock) |
| N1850 feed well (actual stock) |
| N1850 rake category (actual stock) |
| N1850 support bridge (actual stock) |
| N1850 leg category (actual stock) |
| N1850 manual lifting mechanism (actual stock) |
| N1850 torque indicator (actual stock) |
| N1850 Dayton gear motor (actual stock) |
| N1850 chain drive category (actual stock) |
| N1850 electrical box (actual stock) |
| N1850 alarm category (actual stock) |
| L02682 six-foot tank (actual stock) |
| L02682 support bridge (actual stock) |
| N1850 Denver transmission mechanism (actual stock) |
| Available for Adjustable Stroke Diaphragm Pump peripheral accessories (1954 description) |
Models with the same components are grouped together; select a group to open its component table.
| Component | Location |
|---|---|
| N1850 tank (actual stock) | 6ft diameter×4ft depth |
| N1850 built-in overflow tank (actual stock) | 3in wide x 6in deep |
| N1850 bottom tapered outlet (actual stock) | 2in, valve/pump not provided |
| N1850 feed well (actual stock) | Feed Well |
| N1850 rake category (actual stock) | |
| N1850 support bridge (actual stock) | Support Bridge |
| N1850 leg category (actual stock) | Legs, no number given |
| N1850 manual lifting mechanism (actual stock) | Manual Raise |
| N1850 torque indicator (actual stock) | Torque Indicator, 547 field unprinted unit |
| N1850 Dayton gear motor (actual stock) | 0.5HP; 1745rpm input, output 45rpm, 39.0 ratio |
| N1850 chain drive category (actual stock) | Original with Chain Drive, number of chains/pitch not listed |
| N1850 electrical box (actual stock) | Electrical Box |
| N1850 alarm category (actual stock) | |
| L02682 six-foot tank (actual stock) | 6ft diameter, depth not documented |
| L02682 support bridge (actual stock) | Bridge |
| N1850 Denver transmission mechanism (actual stock) | All internal gears have not been disassembled |
| Available for Adjustable Stroke Diaphragm Pump peripheral accessories (1954 description) | Can be installed on Denver thickener and driven by its mechanism; not original internal parts for all models |
The Thickener is also documented under these designations: Denver thickener, Thickener 12×8, Denver Thickener 4 X 6, Denver6ft.
The Thickener is listed under the Denver Equipment brand as: Thickener. Period: 1945. Status: Historical model.
17 components are recorded, including: N1850 tank (actual stock), N1850 built-in overflow tank (actual stock), N1850 bottom tapered outlet (actual stock), N1850 feed well (actual stock), N1850 rake category (actual stock), N1850 support bridge (actual stock), N1850 leg category (actual stock), N1850 manual lifting mechanism (actual stock) and more. The full list with locations is in the components table on this page.
Model-specific components with their own page: N1850 Denver transmission mechanism (actual stock), Available for Adjustable Stroke Diaphragm Pump peripheral accessories (1954 description) (2 in total).
Send us a drawing or sample and tell us the equipment model and part name.
Provide the equipment model, drawing for engineering review and quotation. If service life or wear is a concern, describe the operating conditions as well.
Or contact us directly: +86 156 3797 3199
zzx@anranst.com
ANRANST provides customers worldwide with engineering assessment, production at certified foundries to the customer technical requirements, quality control and finished-part delivery for custom wear parts and industrial spares, with scope to support other custom industrial parts.
We review mating surfaces and interface dimensions and assess material, heat treatment and manufacturing feasibility.
Material grades and heat-treatment processes are specified order by order, stated in the technical agreement and tracked through production.
Drawing confirmation, material and process control, production tracking, inspection and acceptance coordination.
We coordinate manufacturing, quality confirmation, packaging and delivery of complete finished parts in a workable, closed-loop supply process.
Provide the existing model, drawings, drawing, materials or operating conditions so we can identify the appropriate technical review and supply route.
Submit an Enquiry