Ore/slurry linear sampler · 1954 · 1 model
Select a model to jump to its component table; former and renamed designations are listed under “Historical names / renamings”.
| Model | Historical names / renamings | Period | Components |
|---|---|---|---|
| Deco Automatic Ore and Pulp linear sampler | Deco Automatic Ore and Pulp Sampler No.1; Deco Automatic Ore and Pulp Sampler No.2 (Heavy duty) | 1954 | 13 |
The numbers on the diagram correspond one to one with the rows below.
| No. | Component | Location | Applies to |
|---|---|---|---|
| 1 | Suspended sample cutter | Suspended cutter below body | Deco Automatic (specification not specified) |
| 2 | Drive housing | Upper drive housing | Deco Automatic (specification not specified) |
| Component |
|---|
| Deco roller ball bearing |
| Deco chain extension pin |
| Deco roller chain |
| Deco gear motor |
| Deco driving sprocket |
| Deco idle sprocket and shaft |
| Deco tensioning bearing seat |
| Deco limit switch at both ends |
| Deco timer switch |
| Deco roller trolley |
| Deco carrier block |
| Deco disengagement arm |
Models with the same components are grouped together; select a group to open its component table.
| No. | Component | Location |
|---|---|---|
| 1 | Deco hanging sampling cutout | Under the carrier block, the ore/slurry flow is cut across the ore/slurry flow in a straight line at a uniform speed |
| Deco roller ball bearing | Cart roller; replaces sliding contact structure | |
| Deco chain extension pin | Connect two links to change the traveling direction of the carrier along the closed-loop link | |
| Deco roller chain | Closed loop round trip drive | |
| Deco gear motor | Intermittent operation sampling drive | |
| Deco driving sprocket | Installed at the output end of the gear motor | |
| Deco idle sprocket and shaft | The other end of the chain link | |
| Deco tensioning bearing seat | Idle shaft supports and adjusts chain tension | |
| Deco limit switch at both ends | Cut off/restore circuit at both ends of the trolley's stroke | |
| Deco timer switch | Restore the motor circuit according to the intermittent cycle | |
| Deco roller trolley | Linear moving carrier | |
| Deco carrier block | Carrier for hanging cutout on trolley | |
| Deco disengagement arm | Engage with the chain extension pin on the carrier block |
The Ore / pulp linear sampler is also documented under these designations: Deco Automatic Ore and Pulp linear sampler, Deco Automatic Ore and Pulp Sampler No.1, Deco Automatic Ore and Pulp Sampler No.2.
The Ore / pulp linear sampler is listed under the Denver Equipment brand as: Ore/slurry linear sampler. Period: 1954. Status: Historical model.
13 components are recorded, including: Deco roller ball bearing, Deco chain extension pin, Deco roller chain, Deco gear motor, Deco driving sprocket, Deco idle sprocket and shaft, Deco tensioning bearing seat, Deco limit switch at both ends and more. The full list with locations is in the components table on this page.
Model-specific components with their own page: Deco hanging sampling cutout, Deco roller trolley, Deco carrier block, Deco disengagement arm (4 in total).
Send us a drawing or sample and tell us the equipment model and part name.
Provide the equipment model, drawing for engineering review and quotation. If service life or wear is a concern, describe the operating conditions as well.
Or contact us directly: +86 156 3797 3199
zzx@anranst.com
ANRANST provides customers worldwide with engineering assessment, production at certified foundries to the customer technical requirements, quality control and finished-part delivery for custom wear parts and industrial spares, with scope to support other custom industrial parts.
We review mating surfaces and interface dimensions and assess material, heat treatment and manufacturing feasibility.
Material grades and heat-treatment processes are specified order by order, stated in the technical agreement and tracked through production.
Drawing confirmation, material and process control, production tracking, inspection and acceptance coordination.
We coordinate manufacturing, quality confirmation, packaging and delivery of complete finished parts in a workable, closed-loop supply process.
Provide the existing model, drawings, drawing, materials or operating conditions so we can identify the appropriate technical review and supply route.
Submit an Enquiry