2026-10-04 · 5 models
Select a model to jump to its component table; former and renamed designations are listed under “Historical names / renamings”.
| Model | Historical names / renamings | Period | Components |
|---|---|---|---|
| Benninghoven RPP 3000 Plus | RPP 3000 Plus | 16 | |
| Benninghoven RPP 4000 HG | RPP 4000 HG | 16 | |
| Benninghoven RPP 4000 Plus | RPP 4000 Plus | 16 | |
| Benninghoven RPP 4000 | RPP 4000 | 16 | |
| Benninghoven RPP Series | RPP Series | 2026-10-04 | 16 |
The numbers on the diagram correspond one to one with the rows below.
| No. | Component | Location | Applies to | |
|---|---|---|---|---|
| 1 |  | Mixer trough liner | Curved inner wall of the twin-shaft mixer trough | RPP Series |
| 2 | Mixer end liner | Inner wall at both ends of the mixer trough | RPP Series | |
| 3 | Discharge door liner | Inner surface of the curved discharge door at the trough bottom | RPP Series | |
| 4 | Mixer arm | Working arm projecting radially from the mixer shaft | RPP Series | |
| 5 | Mixer shaft | Two parallel working shafts inside the twin-shaft mixer | RPP Series |
| Component |
|---|
| Dryer lifter plate |
| Elevator chain |
| Elevator bucket |
| Elevator sprocket |
| Mixer arm wear protector |
| Mixer shaft seal |
| Dust filter bag |
| Discharge door cylinder |
| Gearbox |
| Mixer drive motor |
| Mixer shaft bearing |
Models with the same components are grouped together; select a group to open its component table.
Models: Benninghoven RPP 3000 Plus, Benninghoven RPP 4000 HG, Benninghoven RPP 4000 Plus, Benninghoven RPP 4000, Benninghoven RPP Series
| No. | Component |
|---|---|
| 1 | Agitating trough liner |
| 2 | Model-specific component |
| 3 | Model-specific component |
| 4 | Agitating arm |
| 5 | Agitating shaft |
| Model-specific component | |
| Model-specific component | |
| Model-specific component | |
| Model-specific component | |
| Model-specific component | |
| Agitating shaft seal | |
| Model-specific component | |
| Model-specific component | |
| Model-specific component | |
| Agitator drive Electric motor | |
| Agitating shaft Bearing |
The RPP covers 5 models: Benninghoven RPP 3000 Plus, Benninghoven RPP 4000 HG, Benninghoven RPP 4000 Plus, Benninghoven RPP 4000, Benninghoven RPP Series. Former and renamed designations are listed in the models table on this page.
The RPP is also documented under these designations: Benninghoven RPP 3000 Plus, RPP 3000 Plus, Benninghoven RPP 4000 HG, RPP 4000 HG, Benninghoven RPP 4000 Plus, RPP 4000 Plus, Benninghoven RPP 4000, RPP 4000, Benninghoven RPP Series, RPP Series.
The RPP is listed under the Benninghoven brand. Period: 2026-10-04. Status: Historical model.
16 components are recorded, including: Agitating trough liner, Agitating arm, Agitating shaft, Agitating shaft seal, Agitator drive Electric motor, Agitating shaft Bearing and more. The full list with locations is in the components table on this page.
Send us a drawing or sample and tell us the equipment model and part name.
Provide the equipment model, drawing for engineering review and quotation. If service life or wear is a concern, describe the operating conditions as well.
Or contact us directly: +86 156 3797 3199
zzx@anranst.com
ANRANST provides customers worldwide with engineering assessment, production at certified foundries to the customer technical requirements, quality control and finished-part delivery for custom wear parts and industrial spares, with scope to support other custom industrial parts.
We review mating surfaces and interface dimensions and assess material, heat treatment and manufacturing feasibility.
Material grades and heat-treatment processes are specified order by order, stated in the technical agreement and tracked through production.
Drawing confirmation, material and process control, production tracking, inspection and acceptance coordination.
We coordinate manufacturing, quality confirmation, packaging and delivery of complete finished parts in a workable, closed-loop supply process.
Provide the existing model, drawings, drawing, materials or operating conditions so we can identify the appropriate technical review and supply route.
Submit an Enquiry