ANRANST ANRANSTANRAN S&T · Luoyang
ZH EN RU
Request a Quote

Centrifugal Cleaner

A centrifugal cleaner uses tangential feed to create a high-speed vortex. Dense contaminants such as sand and metal particles move along the cone wall into the underflow, while accepted stock exits through the vortex finder at the top. The ceramic cone, inlet, underflow nozzle and reject outlet are major erosion zones.

Centrifugal Cleaner

Equipment Section View

Centrifugal cleaner sectional reference diagram
Centrifugal cleaner sectional reference diagram

A centrifugal cleaner uses tangential feed to create a high-speed vortex. Dense contaminants such as sand and metal particles move along the cone wall into the underflow, while accepted stock exits through the vortex finder at the top. The ceramic cone, inlet, underflow nozzle and reject outlet are major erosion zones.

Equipment Parts

Part Identification and Technical Details

Explore part names, images, material options and technical requirements. Select a card to open the corresponding replacement part page.

Major Components and Assemblies

Major Components and Assemblies

Individual and Maintenance Parts

Individual and Maintenance Parts

01

Ceramic Cone

Technical Requirements
Confirm alumina and SiC ceramic hardness against the specific grade and material certificate, and protect the ceramics from external impact.
02

Underflow Nozzle

Technical Requirements
The bore size controls underflow; set the wear limit by the permitted increase in bore diameter.
03

Vortex Finder

Technical Requirements
Requires erosion resistance, concentricity and chip-free inlet edges.
04

Cleaner Body

Technical Requirements
Accept 316L properties against the product form, material standard and certificate; finish weld surfaces according to the specified procedure.
05

Feed Inlet Liner

Technical Requirements
Consider ceramics at high-velocity tangential inlets and resilient composite structures where impact is greater.
06

Accepts Outlet Liner

Technical Requirements
Keep surfaces smooth to prevent fibre accumulation and crevice corrosion.
07

Rejects Outlet Liner

Technical Requirements
Consider harder materials in sand-rich reject zones and control steps between adjoining sections.
08

Gaskets / seals

Technical Requirements
Select EPDM, FKM or PTFE for the actual stock, temperature, cleaning media and seal design.
09

Mounting Bracket

Technical Requirements
The support must withstand the weight of the fully flooded bank, vibration and maintenance loads.

Materials for similarly named parts may differ by OEM, machine model and operating conditions. Confirm the machine model, OEM drawing number and measured dimensions before ordering or manufacture.

Materials for similarly named parts may differ by OEM, machine model and operating conditions. Confirm the machine model, OEM drawing number and measured dimensions before ordering or manufacture.

Equipment Manufacturers and Series

ANDRITZ Valmet Voith Paper

Request centrifugal cleaner wear parts

Provide the machine model, operating conditions and target service life so our engineers can recommend materials and prepare a quotation.

Send Operating Details for a Quote

Or contact us directly: +86 156 3797 3199
zzx@anranst.com

Manufacturing Services in China

From Technical Assessment to Finished-Part Delivery

ANRANST provides customers worldwide with coordinated consulting, supplier sourcing, quality control and finished-part delivery for custom parts, wear parts and industrial spares from China, with scope to support other custom industrial parts.

01

Technical Advice

Equipment and part identification, drawing review, material selection and manufacturing feasibility assessment.

02

Supplier Introductions

Match requirements with suitable manufacturers in China and coordinate the exchange of technical information.

03

Quality Control

Drawing confirmation, material and process control, production tracking, inspection and acceptance coordination.

04

Finished-Part Delivery

Coordinate manufacturing, quality confirmation, packaging and delivery of complete finished parts.

Provide the existing model, drawings, drawing or part numbers, materials or operating conditions so we can identify the appropriate technical review and supply route.

Submit an Enquiry