Ground engaging & cutting tools
أسنان الدلو, الوصلات, الأغطية و القطع الأسنان
Mining bucket GET systems and mining and road-milling cutting tools
Bucket teeth are part of a system. Tips, adapters, locking pins, bucket lips and shrouds form ground engaging tools (GET). Cutting picks form a different system of hard tips, steel bodies, wear washers, clamping sleeves and holders. Both contact material directly, but their interfaces, loads and material options are not interchangeable.
Bucket GET Teeth, adapters, locks, bucket lips and side, bottom and back shrouds
Cutting tools Surface miner picks, road cold-milling picks and matching holder interfaces
Main Loads Penetration, impact, bending, abrasion, loosening, foreign objects and heat
متطلبات التحديد المعدات, bucket or cutting-drum model, system series, part number, interfaces and operating conditions
System scope
System identification OEM, equipment, bucket or cutting-drum model, tooth system or holder series
Interface geometry Adapter nose, tooth cavity, shank diameter, pin holes, clamping sleeve, bucket lip and mounting face
Working position Centre or corner tooth, left or right, lip, wing, bottom or back
Combined operating conditions Penetration, impact, abrasion, material hardness, particle size, temperature and foreign objects
Confirm the complete tooth system and installation position
Teeth are replaceable penetrating wear parts. Adapters connect them to the lip, while locking pins and retainers secure them. Lip, side, bottom and back shrouds protect the bucket structure. An incompatible interface can cause looseness, uneven loading or structural damage.
Surface miner and cold-milling round-shank picks use different tip geometry, shank diameters, clamping sleeves and holder systems. Carbide or PCD tip selection must also suit rock, asphalt, concrete and peak impact conditions.
Mining bucket GET
Complete tooth, adapter and shroud protection systems
The links below identify individual components. Confirmed OEM part numbers and applicable equipment models are maintained on each product page.
Bucket teeth and tips
Penetrate and cut directly into material. Check tooth system, tip shape, centre or corner position, adapter nose and locking method.
Tooth adapters
Connect teeth to the bucket lip. Match the nose, base, welded or mechanical interface, pin position and tooth cavity.
Lip shrouds
Cover the leading lip edge between adapters. Check lip thickness, position, locks, adjacent clearance and material flow.
Side and wing shrouds
Protect bucket wings and corners. Distinguish left/right and upper/lower positions, and confirm interfaces, profiles and adjacent protection.
Bottom shrouds
Resist sliding wear and impact beneath the bucket. Check layout, orientation, welded or mechanical fastening and bottom-plate condition.
Bucket back shrouds
Protect high-wear areas on the rear wall. Confirm curvature, position number, connections, material flow and used-part wear maps.
Mining and road cutting
Round-shank picks and holder interfaces
Picks, clamping sleeves, wear washers and holders transfer cutting forces together. Even suitable materials can fail quickly when interfaces do not match.
Surface miner cutting picks
Cut rock and transfer loads into holders. Check carbide geometry, tip, shank diameter, clamping sleeve, holder and rock strength.
Cold-milling picks
Used for asphalt, concrete or fine milling. Check drum, holder, shank diameter, cutting depth, tip material and milling objective.
Materials and Properties
Balance penetration, impact resistance and wear resistance
No universal grade is promised independently of model and conditions. Select materials and heat treatment by component position and failure mode.
Failure and mating components
Trace wear patterns through tooth systems, holders and operation
Tooth life depends on materials, adjacent interfaces and how the machine is used.
| Symptoms | الفحوصات ذات الأولوية | Associated Risks |
|---|---|---|
| Loose or lost bucket teeth | Tooth system, nose wear, pins or retainers, installation orientation and adapter cracks | Adapter and lip damage, with foreign objects entering downstream equipment |
| Tooth root fracture | Impact severity, material toughness, heat treatment, adapter support, uneven loading and existing cracks | Tooth-system downtime and bucket structural damage |
| Uneven adapter nose wear | Tooth-cavity fit, locking clearance, tooth selection, left/right position and loading technique | New teeth cannot be securely installed |
| Local shroud wear-through | Material flow, coverage, adjacent gaps, connectors and bottom or side plate deformation | Direct wear of the bucket structure |
| Non-rotating picks or uneven wear | Holder bore, shank diameter, clamping sleeve, dust, temperature, flushing and installation angle | One-sided tip wear and scrapped holders |
| Broken or detached hard tips | Peak impact, tip geometry, brazing, steel-body support, cutting depth and foreign objects | Sharp loss of cutting performance and overload of adjacent picks |
Enquiries and quality control
Information for GET and cutting-tool supply
Prioritise identifiable system numbers, part numbers and mating used parts. Do not infer a model from one appearance photograph.
المعدات and working attachment
OEM, complete model, serial number, bucket or cutting-drum model and installation position.
System and part numbers
Tooth system, holder series, and tooth, adapter, pin, shroud or pick part numbers.
Interface dimensions
Nose, cavity, lip, pin holes, shank diameter, clamping sleeve, holder bore and installation angle.
المواد والعمليات
Alloy steel body, heat treatment, carbide or PCD tip, brazing, weld overlay and inspection requirements.
Mating relationships
Centre or corner teeth, left/right shrouds, locks, adjacent protection, holders and drum layout.
ظروف التشغيل وأنماط الأعطال
Material or road surface, impact and abrasion severity, cutting depth, speed, service life and failure photos.
Public technical references: Caterpillar describes teeth, adapters, locks and lip or wing protection as a coordinated GET system, with tips selected for penetration, impact and abrasion. Wirtgen describes round-shank picks comprising carbide tips, steel bodies, wear washers and clamping sleeves. Surface mining and cold milling use different tip geometry and material options.Cat Mining GET · Cat Hydraulic Mining Shovel GET · Wirtgen Surface Miner Picks · Wirtgen Cold Milling Tools
الأجزاء والمعدات ذات الصلة
Related equipment, products, materials and OEM models
المعدات and OEM routes lead to the same product page, where confirmed part numbers and applicable models are maintained.
Electric rope shovels and hydraulic mining shovels Buckets, lips, tooth systems, shrouds and structural protection. Surface miners Picks, holders, cutting drums and rock conditions. Cold Milling Machine Milling picks, holders, drums and project objectives. العلامات التجارية والموديلات الأصلية Check GET and cutting-tool part numbers by brand, equipment and complete model.
Request tooth, adapter, shroud and cutting-pick options and a quotation
Submit equipment, bucket or drum model, tooth system or holder, part numbers, interface dimensions, materials and operating conditions for review and quotation.
خدمات صنع في الصين
من التقييم الفني إلى تسليم المنتج بالكامل
توفر شركة ANRANST للعملاء العالميين تقييمات هندسية، واختيار التصنيع الصيني، ومراقبة الجودة، وتسليم الأجزاء النهائية لقطع الغيار الصناعية المقاومة للتآكل حسب الطلب، ويمكنها أيضًا دعم قطع الغيار الصناعية الأخرى حسب الطلب.
مراجعة الرسومات والهندسة
قم بمراجعة أسطح التزاوج وأبعاد الواجهة، وقم بتقييم جدوى المواد والمعالجة الحرارية والتصنيع.
تحديد المادة والمعالجة الحرارية
تُحدَّد درجات المواد وعمليات المعالجة الحرارية لكل طلب على حدة، وتُثبَّت في الاتفاقية الفنية وتُتابَع أثناء الإنتاج.
ضبط الجودة
يشمل ذلك تأكيد الرسم، ومراقبة المواد والعمليات، وتتبع الإنتاج، وتنسيق عمليات الفحص والقبول.
تسليم المنتج النهائي
تنظيم عمليات التصنيع والتحقق من الجودة والتعبئة والتغليف وتسليم المنتجات النهائية الكاملة لتشكيل حلقة إمداد قابلة للتنفيذ.
قم بتزويدنا بالنماذج الحالية، والرسومات، وأرقام الرسومات، وأرقام الأجزاء، والمواد، أو معلومات ظروف التشغيل، وسنقوم بتحديد التحقق الفني ومسار التوريد وفقًا لذلك.
إرسال طلب