METSO · Détails de la pièce

Feed Disc / Distributor Cone

Feed Plate / Feed Cone

Identify parts for Metso cone crushers, check models and drawing, confirm materials and processes, and submit an inquiry.

Équipements et modèles applicables

Identifiez le modèle installé et les dimensions clés, puis vérifiez la révision du plan et les interfaces physiques.

Equipment Series

Metso Cone Crushers

Models and Key Dimensions

Metso HP Series (HP100-HP800), GP Series (GP100-GP550) and Omnicone 1560

Matériaux et procédés

Select the material grade and heat treatment for the operating conditions, processed material and equipment specifications. The options below are commonly used; confirm the final grade against the drawing and technical agreement.

High-Manganese Steel Mn13Cr2

Solution-treated and water-quenched high-manganese steel; surface work hardening depends on impact and contact loading. Verify initial hardness against the material standard and drawing.

High-Manganese Steel Mn18Cr2

Wear-resistant option for highly abrasive feed materials

Hardox 500 Wear-Resistant Steel Plate

Confirm Hardox 500 hardness for the specified thickness against the material certificate. It is a candidate material for sliding abrasion.

Alloy steel 42CrMo4 with surface hardening

Forged option; verify the hardened surface layer and core toughness against the specific part drawing.

Caractéristiques d'usure et remplacement

Modes d'usure et conseils d'entretien courants ; le cycle réel dépend des conditions, du matériau et des données de fonctionnement.

Modes d'usure courants

  • Feed impact causes wear and deformation at the top of the feed cone
  • Uneven loading accelerates wear on one side of the feed cone, further worsening feed distribution
  • A worn feed cone can direct material to one side of the crushing chamber, causing uneven liner wear
Critères de remplacement

Assess remaining feed cone height, thickness and uneven wear against the maintenance manual. Inspect the feed cone when feed distribution becomes uneven or uneven liner wear increases. Use the model-specific wear limits to decide on replacement.

Contrôle matière et procédé

Les exigences matière, traitement thermique, procédés composites et contrôles suivent le plan, les conditions et le contrôle technique.

Material Grade / Substrate

High-manganese steels Mn13Cr2 and Mn18Cr2, Hardox 500 wear plate and other drawing-specified materials

Heat Treatment Condition

Solution heat treatment with water quenching. Final hardness and microstructure must meet the drawing and agreed technical specification.

Composite / Hardfacing Requirements

Weld Hardox wear plate using an approved procedure for the grade and thickness. Select consumables, preheat, interpass temperature and repair limits in accordance with the manufacturer's recommendations and the drawing.

Dimensions and Inspection

Verify critical dimensions against the drawing for the OEM model details, including fits, sealing surfaces and oil groove locations. Select nondestructive testing methods for the material, part geometry and technical agreement; MT applies only to suitably magnetizable ferromagnetic materials. Check copper alloy bushing hardness and uniformity as specified in the drawing.

Des pièces de même nom peuvent ne pas être interchangeables selon le modèle, la révision du plan, les interfaces et les exigences matière. Avant fabrication, se baser sur le modèle complet, le numéro de série et les plans.

Send Your Wear Part Requirements

Provide the equipment model, drawing for engineering review and quotation. If service life or wear is a concern, describe the operating conditions as well.

Demander un devis

Ou contactez-nous directement : +86 156 3797 3199
zzx@anranst.com

Manufacturing Services in China

From Technical Assessment to Finished-Part Delivery

ANRANST provides customers worldwide with engineering assessment, production at certified foundries to drawing, quality control and finished-part delivery for custom wear parts and industrial spares, with scope to support other custom industrial parts.

Veuillez fournir la marque de l’équipement, le modèle complet et le numéro de série, le nom de la pièce, sa référence ou le numéro du plan, l’indice de révision du plan, la quantité, les exigences relatives au matériau et les conditions de service. Si ces identifiants ne sont pas disponibles, envoyez des photographies et les dimensions principales.

Submit an Enquiry