سلسلة المعدات
Metso Nordberg C Series الكسارات الفكية
METSO · Part التفاصيل
ألواح الخد العلوية
Upper Cheek Plate
حدّد أجزاء كسارات الفك Metso، وتحقق من الطرازات وأرقام الرسومات، وأكِّد المواد والعمليات، ثم قدّم استفسارك.
المعدات, Models and Part Numbers
Upper cheek plates protect both frame sidewalls in the upper crushing chamber from material wear. The part numbers below identify Metso Nordberg C Series jaw crusher parts and require confirmation against the installed machine.
Applicable Models
C80 وC96 وC100 وC106 وC110 وC120 وC125 وC130 وC140 وC150 وC200 وC3054
Part Type
Upper cheek plate
Part identification
Metso equipment and part specifications
Upper cheek plate part numbers
| Model | Part Number | Description |
|---|---|---|
| C100 | 446121 | Cheek plate upper |
| C125 | 949648704900 | CHEEK PLATE, UPPER |
| C140 | 930654 | CHEEK PLATE, UPPER |
418609 | CHEEK PLATE, UPPER | |
| C106 | 570392 | CHEEK PLATE, UPPER,C105/C106 |
| C120 | MM1028794 | CHEEK PLATE, UPPER,XT710 |
| C130 | MM0242228 | CHEEK PLATE, UPPER |
| C150 | MM0586529 | CHEEK PLATE, UPPER,C150 |
| C200 | 917296 | CHEEK PLATE, UPPER,C200 |
917307 | CHEEK PLATE, UPPER,C200 | |
MM1236621 | Upper cheek plate | |
MM1236623 | Upper cheek plate | |
MM1236625 | Upper cheek plate | |
| C3054 | 585352 | CHEEK PLATE, UPPER |
585353 | CHEEK PLATE, UPPER |
أرقام القطع هي مراجع تحديد لماكينات سلسلة C من Metso Nordberg. أكِّد اللوحة الاسمية للمعدات والرقم التسلسلي والرسم قبل الطلب.
المواد والعمليات
Review the following upper cheek plate material and process information when assessing specifications and alternatives.
XT710 manganese steel
Verify cheek plate material against the specific part drawing and material certificate. The XT710 designation alone does not establish composition, hardness or interchangeability with jaw plates.
Mn13Cr2 / Mn18Cr2
Mn13Cr2 and Mn18Cr2 are candidate chromium-bearing manganese steel grades. Confirm composition, heat treatment and suitability against the drawing, material standard and actual loading.
Installation
Cheek plates are bolted to the frame sidewalls; some models use a recessed mounting arrangement.
Wear and Replacement Criteria
Use the following upper cheek plate wear patterns and replacement considerations during maintenance.
Main wear zones
Material flow zones along the middle and upper chamber sidewalls, and around bolt holes. Upper cheek plate wear is generally lighter than lower cheek plate wear.
Replacement Criteria
Assess remaining thickness against the model-specific maintenance limits. Stop and inspect if there is wear-through, cracking or loosening caused by bolt-hole wear.
Recommended Actions
Measure thickness and check bolt tightness regularly. Schedule upper and lower cheek plate replacement according to actual wear and model-specific maintenance requirements.
Information Needed for an Inquiry
المعدات model, such as C106; part number; material requirements; left/right and upper/lower position; and quantity.