سلسلة المعدات
Metso Nordberg C Series الكسارات الفكية
METSO · Part التفاصيل
مقاعد ألواح دفع الكسارة الفكية
Toggle Seat
حدّد أجزاء كسارات الفك Metso، وتحقق من الطرازات وأرقام الرسومات، وأكِّد المواد والعمليات، ثم قدّم استفسارك.
المعدات, Models and Part Numbers
Toggle seats support the toggle plate at the rear of the pitman and at the adjustment assembly, carrying alternating crushing loads. The listed part numbers are identification references for Metso Nordberg C Series machines and require assembly confirmation.
Applicable Models
C80 وC96 وC100 وC106 وC110 وC120 وC125 وC130 وC140 وC150 وC200 وC3054
Part Type
Toggle seat / toggle seat holder
Part identification
Metso equipment and part specifications
Toggle seat and holder part numbers
| Model | Part Number | Description |
|---|---|---|
| C125 | 949647114300 | TOGGLE SEAT |
| C140 | 418620 | TOGGLE SEAT |
| C106 | MM0571688 | Toggle Seat Holder |
MM0571690 | Toggle Seat Holder | |
| C120 | MM0525649 | TOGGLE SEAT HOLDER,C120 |
MM1064803 | Toggle Seat | |
MM1065194 | Toggle Seat | |
MM1068718 | Toggle seat holder | |
MM0578905 | TOGGLE SEAT HOLDER(UPPER) | |
MM1471471 | Toggle Seat Holder | |
| C130 | MM1005346 | TOGGLE SEAT |
MM1093453 | TOGGLE SEAT HOLDER | |
MM1093476 | TOGGLE SEAT | |
MM0536175 | Toggle seat | |
MM1472500 | Toggle seat | |
MM1393986 | TOGGLE SEAT HOLDER ASSEMBLY | |
| C150 | MM0567825 | TOGGLE SEAT CARRIER,C150 |
418620A | TOGGLE SEAT CASTING,C140FLDIN1017-CK45-80X50X1211 -1 | |
MM1471482 | Toggle seat | |
| C200 | MM0229294 | SPACER ASSEMBLY,C200 TOGGLE SEAT |
917549 | TOGGLE SEAT,C200 | |
MM0214574 | SPACER,C200 TOGGLE SEAT | |
MM1241210 | Toggle Seat | |
| C3054 | 921310 | TOGGLE SEAT |
أرقام القطع هي مراجع تحديد لماكينات سلسلة C من Metso Nordberg. أكِّد اللوحة الاسمية للمعدات والرقم التسلسلي والرسم قبل الطلب.
المواد والعمليات
Review the following toggle seat material and process information when assessing specifications and alternatives.
Alloy steel forgings
Specify toggle seat material and manufacturing method from the part drawing. The material must meet support-load, contact-wear and toughness requirements; a generic alloy steel grade is not an OEM standard for every model.
Surface treatment
Verify contact-face heat treatment, hardness and core properties against the part drawing. Do not add a surface-hardening process without design approval.
Fit and contact accuracy
Verify toggle plate and seat contact profiles, mating dimensions and assembly condition against the model-specific drawing.
Wear and Replacement Criteria
Use the following toggle seat wear patterns and replacement considerations during maintenance.
Main wear zones
Wear on the toggle contact faces and locating-groove sides. Seat wear affects toggle plate life and discharge-setting stability.
Replacement Criteria
Check contact-face wear, grooves, plastic deformation and profile deviations against model-specific maintenance limits.
Recommended Actions
Inspect contact-face wear regularly and check the seats whenever the toggle plate is replaced. Follow the model-specific maintenance manual for lubricated or lubrication-free operation.
Information Needed for an Inquiry
المعدات model, such as C140; part number; front or rear seat position; and quantity. Front and rear seats have different dimensions.