سلسلة المعدات
Metso Nordberg C Series الكسارات الفكية
METSO · Part التفاصيل
أسافين تثبيت ألواح الفك
Jaw Die Clamping Wedge
حدّد أجزاء كسارات الفك Metso، وتحقق من الطرازات وأرقام الرسومات، وأكِّد المواد والعمليات، ثم قدّم استفسارك.
المعدات, Models and Part Numbers
Jaw die clamping wedges mechanically secure jaw plates to the frame and pitman. The listed part numbers are identification references for Metso Nordberg C Series jaw crushers and must be checked against the installed assembly.
Applicable Models
C80 وC96 وC100 وC106 وC110 وC120 وC125 وC130 وC140 وC150 وC200 وC3054
Part Type
Jaw die clamping wedge
Part identification
Metso equipment and part specifications
Jaw die clamping wedge part numbers
| Model | Part Number | Description |
|---|---|---|
| C80 | 902723 | TIGHTENING WEDGE,C80R |
| C80 | 902725 | TIGHTENING WEDGE,C80R |
| C100 | 949648703100 | TIGHTENING WEDGE |
| C100 | 949648703200 | TIGHTENING WEDGE |
| C125 | 949647113500 | TIGHTENING WEDGE |
| C125 | 949647113600 | TIGHTENING WEDGE |
| C140 | 927644 | TIGHTENING WEDGE |
| C140 | 418604 | FILL WEDGE |
| C140 | 418622 | TIGHTENING WEDGE |
| C140 | 930763 | TIGHTENING WEDGE |
| C106 | MM0523101 | TIGHTENING WEDGE, UPPER,C106 1P 0861-512 |
| C106 | MM0213251 | FILL WEDGE,C116, C106 |
| C106 | MM1181137 | TIGHTENING WEDGE |
| C106 | MM0246829 | Upper Tightening Wedge |
| C120 | MM1010146 | TIGHTENING WEDGE, UPPER,C120 |
| C120 | MM1019561 | TIGHTENING WEDGE, UPPER,C120 |
| C120 | MM0525059 | Upper wedge |
| C120 | MM0525063 | Tightening wedge upper |
| C130 | MM1081689 | TIGHTENING WEDGE, UPPER MM0512875 WEDGE |
| C130 | MM1081691 | TIGHTENING WEDGE, UPPER MM1095373 FASTENING ITEM |
| C130 | 704100027402 | Fixed Jaw Upper Wedge Hammer Head Bolt M36x400/130mm |
| C130 | MM1024805 | TIGHTENING WEDGE, UPPER |
| C130 | MM1095373 | Tension Wedge |
| C150 | MM1031564 | TIGHTENING WEDGE,C150 |
أرقام القطع هي مراجع تحديد لماكينات سلسلة C من Metso Nordberg. أكِّد اللوحة الاسمية للمعدات والرقم التسلسلي والرسم قبل الطلب.
المواد والعمليات
Review the following jaw die clamping wedge material and process information when assessing specifications and alternatives.
Alloy Cast Steel
Verify clamping wedge material, heat treatment and hardness against the part drawing. The wedge face must fit the jaw plate backing accurately; contact and preload must meet the model-specific assembly specification.
Fastening system
The fastening system includes clamping and fill wedges, hammer-head bolts, spring assemblies, washers and nuts. Metso offers fastening kits; confirm the kit contents for the specific machine.
Installation considerations
Ensure the jaw plate backing faces seat fully against the frame or pitman, with even wedge contact. Tighten bolts progressively to the specified torque.
Wear and Replacement Criteria
Use the following clamping wedge wear patterns and replacement considerations during maintenance.
Main failure modes
Wedge-face wear, bolt-thread wear or breakage, and spring fatigue.
Replacement Criteria
Wedge wear that prevents effective jaw plate clamping, damaged bolt threads, or spring failure causing inadequate preload.
Recommended Actions
Inspect wedges whenever jaw plates are replaced. Check bolts and springs for damage and tighten bolts to the specified torque.
Information Needed for an Inquiry
المعدات model, such as C100; part number; clamping or fill wedge; whether a fastening kit is required; and quantity.