NICO Hydrastroke reciprocating apron feeder

Reciprocating feeder · 1958 · 1 model

NICO Hydrastroke reciprocating apron feeder – Reciprocating feeder
NICO Hydrastroke reciprocating apron feeder – Reciprocating feeder (2)
Pictured model: US3097734A Fig.1-4; commercial model unspecified
NICO
NICOBrand
Reciprocating feederEquipment type
1958Period
Historical modelStatus
NICO

Models and Historical Names in This Series

Select a model to jump to its component table; former and renamed designations are listed under “Historical names / renamings”.

ModelHistorical names / renamingsPeriodComponents
NICO Hydrastroke reciprocating apron feeder(Reciprocating Plate Feeder); NICO Hydrastroke RH550; NICO TR 1100 Hydrastroke; NICO 550 H Hydrastroke; NICO Hydrastroke 54in×10ft195821
NICO

Numbered Components

The numbers on the diagram correspond one to one with the rows below.

No.ComponentLocationApplies to
1Reciprocating feeder deckReciprocating deck beneath hopper
2Support frameStationary frame around feeder deck
3Hopper and inclined discharge wallHopper and inclined wall above deck
4Belt drive and gear reducer (Figs.1-4)Belt and reducer between motor and crank
5Crank and connecting rod mechanismCrank-and-rod drive to feeder deck
6Heavy bearing at crank output (Figs.1-4)Bearing between crank and drive rod
7Paired suspension cables (Figs.1-4)Cable suspension at deck sides
8Cable clamp plate and bolts (Figs.1-4)Clamped lower cable anchorage
9Suspension adjustment bolt (Figs.1-4)Height adjustment at lower cable anchor
10Curved rocker (Figs.1-4)Weight-bearing rocker at cable upper end
Other Components · 11 items
Component
Reciprocating feeding tray
Fig5-7 Differential hydraulic cylinder
Fig5-7 Hydraulic pump, reversing valve and oil tank
Fig5-7 Rigid suspension tie rod
Fig5-7 Disc spring group
Fig8-11 Lateral rigid connecting rod
Fig8-11 Differential drive cylinder
Fig5-7 Upper and lower bearings and rocking blocks
Fig5-7 Ladder feeding bottom plate
Fig8-11 Double arc rocker
Fig8-11 Slotted retainer and load-bearing guide surface
NICO

Components by Model

Models with the same components are grouped together; select a group to open its component table.

NICO Hydrastroke reciprocating apron feeder21 items
No.ComponentLocation
1Reciprocating feeding bottom plateTilt movement plate at the bottom of the hopper
2Plate guide and support frameBoth sides and lower part of the reciprocating bottom plate
3Hopper and inclined discharge wallAbove the patented Fig1-4 feeding bottom plate, the hopper tilts the discharge wall and opening
4Fig1-4 Belt drive and gear reducerMotor to crank output shaft
5Eccentric crank connecting rod mechanismBetween the power end and the reciprocating bottom plate
6Fig1-4 Heavy duty bearing at crank output endOutside the reducer, supporting the crankshaft
7Fig1-4 Pairs of suspended steel cablesBoth sides of the feeding bottom plate, front and rear support on each side
8Fig1-4 Steel cable clamp plate and fastening boltsBracket/frame steel cable fixed end
9Fig1-4 Suspension height/tilt angle adjustment boltUpper suspension point with slotted adjustment bracket
10Fig1-4 Arc rockerUnder the floor beam, in contact with the steel cable for load bearing
Reciprocating feeding trayLucky Friday on-site RH550 mine bin bottom; 3ft wide
Fig5-7 Differential hydraulic cylinderThe lower side of the hopper, connected to the reciprocating bottom plate
Fig5-7 Hydraulic pump, reversing valve and oil tankDifferential cylinder oil supply and return circuit
Fig5-7 Rigid suspension tie rodFront and rear supports on both sides of the base plate
Fig5-7 Disc spring groupThe lower end of the rear support rod; the upper end of the front support rod; both ends cannot be called the same assembly.
Fig8-11 Lateral rigid connecting rodBetween pairs of opposite rocking blocks, end bolt connection
Fig8-11 Differential drive cylinderPower input terminal of ladder base plate
Fig5-7 Upper and lower bearings and rocking blocksBetween the suspension rod end and the hopper/floor beam
Fig5-7 Ladder feeding bottom plateBelow the hopper discharge port, the weight pushing surface
Fig8-11 Double arc rockerThe lower parts of the four corners of the base plate bear the base plate and load
Fig8-11 Slotted retainer and load-bearing guide surfaceThe frame and base plate are arranged upside down in pairs

Frequently asked questions

What other names or designations is the NICO Hydrastroke reciprocating apron feeder known by?

The NICO Hydrastroke reciprocating apron feeder is also documented under these designations: NICO Hydrastroke RH550, NICO TR 1100 Hydrastroke, NICO 550 H Hydrastroke, NICO Hydrastroke 54in×10ft.

Which brand and type of equipment is the NICO Hydrastroke reciprocating apron feeder?

The NICO Hydrastroke reciprocating apron feeder is listed under the NICO brand as: Reciprocating feeder. Period: 1958. Status: Historical model.

Which components and wear parts are recorded for the NICO Hydrastroke reciprocating apron feeder?

21 components are recorded, including: Reciprocating feeding tray, Fig1-4 Belt drive and gear reducer, Fig1-4 Heavy duty bearing at crank output end, Fig1-4 Pairs of suspended steel cables, Fig1-4 Steel cable clamp plate and fastening bolts, Fig1-4 Suspension height/tilt angle adjustment bolt, Fig5-7 Differential hydraulic cylinder, Fig5-7 Hydraulic pump, reversing valve and oil tank and more. The full list with locations is in the components table on this page.

Which model-specific components of the NICO Hydrastroke reciprocating apron feeder have their own page?

Model-specific components with their own page: Reciprocating feeding bottom plate, Eccentric crank connecting rod mechanism, Hopper and inclined discharge wall, Plate guide and support frame, Fig1-4 Arc rocker, Fig5-7 Upper and lower bearings and rocking blocks, Fig5-7 Ladder feeding bottom plate, Fig8-11 Double arc rocker and more (9 in total).

How do I enquire about parts for the NICO Hydrastroke reciprocating apron feeder?

Envoyez-nous un plan ou un échantillon et indiquez le modèle d'équipement et le nom de la pièce.

Envoyez-nous un plan ou un échantillon et indiquez le modèle d'équipement et le nom de la pièce

Provide the equipment model, drawing for engineering review and quotation. If service life or wear is a concern, describe the operating conditions as well.

Demander un devis

Ou contactez-nous directement : +86 156 3797 3199
zzx@anranst.com

Manufacturing Services in China

From Technical Assessment to Finished-Part Delivery

ANRANST provides customers worldwide with engineering assessment, production at certified foundries to drawing, quality control and finished-part delivery for custom wear parts and industrial spares, with scope to support other custom industrial parts.

Veuillez fournir la marque de l’équipement, le modèle complet et le numéro de série, le nom de la pièce, sa référence ou le numéro du plan, l’indice de révision du plan, la quantité, les exigences relatives au matériau et les conditions de service. Si ces identifiants ne sont pas disponibles, envoyez des photographies et les dimensions principales.

Submit an Enquiry