METSO · Détails de la pièce

Socket Liner

Socket Liner

Identify parts for Metso cone crushers, check models and drawing, confirm materials and processes, and submit an inquiry.

Équipements et modèles applicables

Identifiez le modèle installé et les dimensions clés, puis vérifiez la révision du plan et les interfaces physiques.

Equipment Series

Metso Cone Crushers

Models and Key Dimensions

Metso HP Series (HP100-HP800), GP Series (GP100-GP550) and MP Series

Matériaux et procédés

Select the material grade and heat treatment for the operating conditions, processed material and equipment specifications. The options below are commonly used; confirm the final grade against the drawing and technical agreement.

C95400 aluminum bronze (ASTM B148)

Aluminum bronze sand casting; verify composition, as-cast or heat-treated condition and mechanical properties against ASTM B148 and the drawing.

Aluminum bronze C95500

Nickel-aluminum bronze; mechanical properties depend on the casting process and heat treatment condition. Verify compliance with the applicable material standard and socket liner drawing.

C93200 leaded tin bronze (SAE 660)

Candidate copper alloy for bearings; maintain the lubrication required by the equipment. The material is not self-lubricating.

Caractéristiques d'usure et remplacement

Modes d'usure et conseils d'entretien courants ; le cycle réel dépend des conditions, du matériau et des données de fonctionnement.

Modes d'usure courants

  • Head gyration causes uneven spherical surface wear, with faster wear in the direction of movement
  • Axial crushing forces cause contact fatigue in the central area of the spherical surface
  • Inadequate lubrication causes spherical surface scuffing and seizure
  • Contaminated lubricant causes scoring of the spherical surface
Critères de remplacement

Assess spherical surface wear, clearance and contact condition against the equipment maintenance manual. If head movement becomes abnormal or copper debris in the oil remains elevated, inspect the socket liner, mating spherical surface and lubrication system. Use the model-specific drawing for replacement limits and installation acceptance criteria.

Contrôle matière et procédé

Les exigences matière, traitement thermique, procédés composites et contrôles suivent le plan, les conditions et le contrôle technique.

Material Grade / Substrate

Aluminum bronze C95400 (ASTM B148), aluminum bronze C95500 and leaded tin bronze C93200 (SAE 660)

Heat Treatment Condition

Select the heat treatment condition for the specific copper alloy grade and part drawing; verify final hardness and microstructure against the technical agreement.

Composite / Hardfacing Requirements

Bronze bushings are not suitable for weld overlay repair. Replace the worn bushing as a complete part; surface repair is not recommended.

Dimensions and Inspection

Verify critical dimensions against the drawing for the OEM model details, including fits, sealing surfaces and oil groove locations. Select nondestructive testing methods for the material, part geometry and technical agreement; MT applies only to suitably magnetizable ferromagnetic materials. Check copper alloy bushing hardness and uniformity as specified in the drawing.

Des pièces de même nom peuvent ne pas être interchangeables selon le modèle, la révision du plan, les interfaces et les exigences matière. Avant fabrication, se baser sur le modèle complet, le numéro de série et les plans.

Send Your Wear Part Requirements

Provide the equipment model, drawing for engineering review and quotation. If service life or wear is a concern, describe the operating conditions as well.

Demander un devis

Ou contactez-nous directement : +86 156 3797 3199
zzx@anranst.com

Manufacturing Services in China

From Technical Assessment to Finished-Part Delivery

ANRANST provides customers worldwide with engineering assessment, production at certified foundries to drawing, quality control and finished-part delivery for custom wear parts and industrial spares, with scope to support other custom industrial parts.

Veuillez fournir la marque de l’équipement, le modèle complet et le numéro de série, le nom de la pièce, sa référence ou le numéro du plan, l’indice de révision du plan, la quantité, les exigences relatives au matériau et les conditions de service. Si ces identifiants ne sont pas disponibles, envoyez des photographies et les dimensions principales.

Submit an Enquiry