slurryMAX-HP

2026-10-03 · 7 models

KREBS Cyclones and Slurry Pumps slurryMAX-HP
KREBS Cyclones and Slurry Pumps slurryMAX-HP (2)
KREBS Cyclones and Slurry Pumps
KREBS Cyclones and Slurry PumpsBrand
2026-10-03Period
Historical modelStatus
KREBS Cyclones and Slurry Pumps

Models and Historical Names in This Series

Select a model to jump to its component table; former and renamed designations are listed under “Historical names / renamings”.

KREBS Cyclones and Slurry Pumps

Numbered Components

The numbers on the diagram correspond one to one with the rows below.

No.ComponentLocation
1ImpellerRed wet-end impeller
2Wear ringFront of the impeller eye
3Suction linerBlue lining around the suction inlet
4Rear linerBlue rear liner on the drive side
5Volute linerBlue liner of the volute chamber
6Pump casingMetal casing outside the blue liner
7BearingBearing shown in the drive-end section
8Pump shaftShaft running from the bearing frame to the impeller
Other Components · 3 items
Component
Expeller
Mechanical seal
Packed gland seal
KREBS Cyclones and Slurry Pumps

Components by Model

Models with the same components are grouped together; select a group to open its component table.

KREBS slurryMAX-HP 10x8, KREBS slurryMAX-HP 12x10, KREBS slurryMAX-HP 14x12, KREBS slurryMAX-HP 16x14, KREBS slurryMAX-HP 4x4, KREBS slurryMAX-HP 6x6 +111 items

Models: KREBS slurryMAX-HP 10x8, KREBS slurryMAX-HP 12x10, KREBS slurryMAX-HP 14x12, KREBS slurryMAX-HP 16x14, KREBS slurryMAX-HP 4x4, KREBS slurryMAX-HP 6x6, KREBS slurryMAX-HP 8x6

No.Component
1Impeller
2Wear ring
3Model-specific component
4Rear liner
5Model-specific component
6Pump casing
7Bearing
8Pump shaft
Auxiliary Impeller
Mechanical seal
Model-specific component

Frequently asked questions

Which models does the slurryMAX-HP cover?

The slurryMAX-HP covers 7 models: KREBS slurryMAX-HP 10x8, KREBS slurryMAX-HP 12x10, KREBS slurryMAX-HP 14x12, KREBS slurryMAX-HP 16x14, KREBS slurryMAX-HP 4x4, KREBS slurryMAX-HP 6x6, KREBS slurryMAX-HP 8x6. Former and renamed designations are listed in the models table on this page.

What other names or designations is the slurryMAX-HP known by?

The slurryMAX-HP is also documented under these designations: KREBS slurryMAX-HP 10x8, KREBS slurryMAX-HP 12x10, KREBS slurryMAX-HP 14x12, KREBS slurryMAX-HP 16x14, KREBS slurryMAX-HP 4x4, KREBS slurryMAX-HP 6x6, KREBS slurryMAX-HP 8x6.

Which brand and type of equipment is the slurryMAX-HP?

The slurryMAX-HP is listed under the KREBS Cyclones and Slurry Pumps brand. Period: 2026-10-03. Status: Historical model.

Which components and wear parts are recorded for the slurryMAX-HP?

11 components are recorded, including: Impeller, Wear ring, Rear liner, Pump casing, Auxiliary Impeller, Mechanical seal, Bearing, Pump shaft and more. The full list with locations is in the components table on this page.

How do I enquire about parts for the slurryMAX-HP?

Envoyez-nous un plan ou un échantillon et indiquez le modèle d'équipement et le nom de la pièce.

Envoyez-nous un plan ou un échantillon et indiquez le modèle d'équipement et le nom de la pièce

Provide the equipment model, drawing for engineering review and quotation. If service life or wear is a concern, describe the operating conditions as well.

Demander un devis

Ou contactez-nous directement : +86 156 3797 3199
zzx@anranst.com

Manufacturing Services in China

From Technical Assessment to Finished-Part Delivery

ANRANST provides customers worldwide with engineering assessment, production at certified foundries to drawing, quality control and finished-part delivery for custom wear parts and industrial spares, with scope to support other custom industrial parts.

Veuillez fournir la marque de l’équipement, le modèle complet et le numéro de série, le nom de la pièce, sa référence ou le numéro du plan, l’indice de révision du plan, la quantité, les exigences relatives au matériau et les conditions de service. Si ces identifiants ne sont pas disponibles, envoyez des photographies et les dimensions principales.

Submit an Enquiry