Which brand and type of equipment is the Joy AFC?
The Joy AFC is listed under the Joy brand. Period: 2026. Status: Historical model.
2026 · 1 model


Select a model to jump to its component table; former and renamed designations are listed under “Historical names / renamings”.
| Model | Period | Components |
|---|---|---|
| Joy AFC | 2026 | 7 |
The numbers on the diagram correspond one to one with the rows below.
| No. | Component | Location | Applies to | |
|---|---|---|---|---|
| 1 | ![]() | Conveyor chain | Traction chain inside the AFC pan | Joy AFC |
| 2 | Flight bar | Transverse material-carrying bar on the conveyor chain | Joy AFC | |
| 3 | Conveyor pan | Load-carrying and chain-guiding pan of the face conveyor | Joy AFC |
| Component |
|---|
| Sprocket |
| Tensioning device |
| Gearbox |
| Stage loader |
Models with the same components are grouped together; select a group to open its component table.
| No. | Component | Location |
|---|---|---|
| 1 | Chain | |
| 2 | Scraper Blade / Flight Bar | |
| 3 | Conveyor trough body | Material trough of the face conveyor |
| Sprocket | ||
| Tensioning device | ||
| Gearbox | Drive frame transmission position | |
| Transfer conveyor | Conveying junction between the working face and the gateroad |
The Joy AFC is listed under the Joy brand. Period: 2026. Status: Historical model.
7 components are recorded, including: Chain, Scraper Blade / Flight Bar, Sprocket, Tensioning device, Conveyor trough body, Gearbox, Transfer conveyor. The full list with locations is in the components table on this page.
Model-specific components with their own page: Conveyor trough body, Gearbox, Transfer conveyor (3 in total).
Envoyez-nous un plan ou un échantillon et indiquez le modèle d'équipement et le nom de la pièce.
Provide the equipment model, drawing for engineering review and quotation. If service life or wear is a concern, describe the operating conditions as well.
Ou contactez-nous directement : +86 156 3797 3199
zzx@anranst.com
ANRANST provides customers worldwide with engineering assessment, production at certified foundries to drawing, quality control and finished-part delivery for custom wear parts and industrial spares, with scope to support other custom industrial parts.
Veuillez fournir la marque de l’équipement, le modèle complet et le numéro de série, le nom de la pièce, sa référence ou le numéro du plan, l’indice de révision du plan, la quantité, les exigences relatives au matériau et les conditions de service. Si ces identifiants ne sont pas disponibles, envoyez des photographies et les dimensions principales.
Submit an Enquiry