Which models does the Progressive Cavity cover?
The Progressive Cavity covers 2 models: KTPC-NM063-P101, KTPC-NM090-P101. Former and renamed designations are listed in the models table on this page.
2018 · 2 models


Select a model to jump to its component table; former and renamed designations are listed under “Historical names / renamings”.
| Model | Period | Components |
|---|---|---|
| KTPC-NM063-P101 | 2018 | 6 |
| KTPC-NM090-P101 | 2018 | 6 |
The numbers on the diagram correspond one to one with the rows below.
| No. | Component | Location | Applies to |
|---|---|---|---|
| 1 | Stator | Green stator assembly at left | KTPC-NM063-P101 |
| 2 | Gearbox | Gearbox housing ahead of right-side motor | KTPC-NM063-P101 |
| 3 | Drive motor | Motor at right end | KTPC-NM063-P101 |
| Component |
|---|
| Rotor |
| Connecting rod |
| Shaft seal |
| Coupling |
Models with the same components are grouped together; select a group to open its component table.
Models: KTPC-NM063-P101, KTPC-NM090-P101
| No. | Component | Location |
|---|---|---|
| 1 | Stator | Working chamber outside the rotor |
| 2 | Gearbox | Motor-to-pump shaft drive end |
| Rotor | Pump conveying working chamber | |
| Connecting rod | Between the drive and the rotor | |
| Shaft seal | Pump shaft exit point | |
| Coupling | Drive connection between the motor and the pump |
The Progressive Cavity covers 2 models: KTPC-NM063-P101, KTPC-NM090-P101. Former and renamed designations are listed in the models table on this page.
The Progressive Cavity is also documented under these designations: KTPC-NM063-P101, KTPC-NM090-P101.
The Progressive Cavity is listed under the Elgin brand. Period: 2018. Status: Historical model.
6 components are recorded, including: Rotor, Stator, Connecting rod, Shaft seal, Coupling, Gearbox. The full list with locations is in the components table on this page.
Model-specific components with their own page: Rotor, Stator, Connecting rod, Shaft seal, Coupling, Gearbox (6 in total).
Envoyez-nous un plan ou un échantillon et indiquez le modèle d'équipement et le nom de la pièce.
Provide the equipment model, drawing for engineering review and quotation. If service life or wear is a concern, describe the operating conditions as well.
Ou contactez-nous directement : +86 156 3797 3199
zzx@anranst.com
ANRANST provides customers worldwide with engineering assessment, production at certified foundries to drawing, quality control and finished-part delivery for custom wear parts and industrial spares, with scope to support other custom industrial parts.
Veuillez fournir la marque de l’équipement, le modèle complet et le numéro de série, le nom de la pièce, sa référence ou le numéro du plan, l’indice de révision du plan, la quantité, les exigences relatives au matériau et les conditions de service. Si ces identifiants ne sont pas disponibles, envoyez des photographies et les dimensions principales.
Submit an Enquiry