Jaw-Plate Clamping Wedges
Clamps the jaw plate to the frame or moving jaw to prevent loosening and shifting during operation.

Jaw-Plate Clamping Wedges (Jaw Die Clamping Wedge)— Jaw Crushers Wear part, position 10.
Emplacement et fonction
| Material Options | Quenched and tempered alloy steels such as 40Cr and 42CrMo, or OEM-specified cast steel |
| Typical Properties and Acceptance Criteria | Balance core toughness, bolt preload capacity, contact-surface compressive strength and fretting resistance. Typical quenched and tempered parts may be specified at approximately 28–40 HRC according to section size and OEM requirements, but final hardness must account for threads, impact and contact design. Inspect for cracks and control wedge angle and contact area. |
| Principal Failure Mechanism | Sliding or three-body abrasion, localized impact and cracking around fastener holes |
Informations de commande / RFQ
- Equipment manufacturer, machine model, serial number, model details and latest drawing revision;
- Part dimensions, unit weight, key tolerances, assembly and fastening method;
- Current material, chemical composition, heat treatment, hardness and mechanical property reports;
- Processed material, maximum particle size, hardness/abrasiveness, moisture and tramp material records;
- Speed, load, temperature, pressure, process medium chemistry and continuous operating time;
- Failure photographs, wear measurements, crack/fracture locations and current service life;
Équipements, matériaux et installations OEM
Utilisez ces liens pour une présélection technique. L'adaptation finale doit être confirmée avec le modèle complet, le numéro de série, la révision du plan, les dimensions et les conditions réelles.
Équipement associé
Matériaux associés
Informations indépendantes du marché de rechange. Les noms et marques OEM appartiennent à leurs titulaires et n'impliquent ni autorisation, ni affiliation, ni endorsement. Confirmez la série, le modèle complet, le numéro de série, les plans et les conditions avant fabrication.