What other names or designations is the Jeffrey Rader known by?
The Jeffrey Rader is also documented under these designations: Waste Shredder.
2012 · 1 model


Select a model to jump to its component table; former and renamed designations are listed under “Historical names / renamings”.
| Model | Historical names / renamings | Period | Components |
|---|---|---|---|
| Jeffrey Rader | Waste Shredder | 2012 | 7 |
The numbers on the diagram correspond one to one with the rows below.
| No. | Component | Location |
|---|---|---|
| 1 | Reinforced frame | Reinforced frame, original item 1 |
| 2 | Breaker plate | Upper-front breaker plate, original item 2 |
| 3 | Frame liner | Internal wear-resistant frame liner, original item 3 |
| 4 | Breaker bar | Breaker bar at the grate, original item 4 |
| 5 | Bearing support | Lower side-frame bearing support, original item 5 |
| 6 | Hydraulically opened rear frame | Hydraulically opened upper-rear frame, original item 6 |
| 7 | Spider-type rotor assembly | Horizontal spider-type rotor assembly, original item 7 |
| 8 | Swing hammer | Four-edge swing hammer, original item 8 |
| 9 | Hydraulic bearing-removal assembly | Bearing-removal assembly, original item 9 |
| 10 | Discharge grate | Discharge grate, original item 10 |
| 11 | Contoured grate support | Contoured grate support, original item 11 |
| Component |
|---|
| Hammer pin |
| Rotor end-disc cap |
| Rotor tooth tip |
| Roller bearing |
Models with the same components are grouped together; select a group to open its component table.
| No. | Component |
|---|---|
| 3 | Housing liner |
| 8 | Model-specific component |
| 10 | Screen bar |
| Hammer shaft | |
| Model-specific component | |
| Model-specific component | |
| Roller bearing |
The Jeffrey Rader is also documented under these designations: Waste Shredder.
The Jeffrey Rader is listed under the TerraSource Global brand. Period: 2012. Status: Historical model.
7 components are recorded, including: Hammer shaft, Housing liner, Screen bar, Roller bearing and more. The full list with locations is in the components table on this page.
Envoyez-nous un plan ou un échantillon et indiquez le modèle d'équipement et le nom de la pièce.
Provide the equipment model, drawing for engineering review and quotation. If service life or wear is a concern, describe the operating conditions as well.
Ou contactez-nous directement : +86 156 3797 3199
zzx@anranst.com
ANRANST provides customers worldwide with engineering assessment, production at certified foundries to drawing, quality control and finished-part delivery for custom wear parts and industrial spares, with scope to support other custom industrial parts.
Veuillez fournir la marque de l’équipement, le modèle complet et le numéro de série, le nom de la pièce, sa référence ou le numéro du plan, l’indice de révision du plan, la quantité, les exigences relatives au matériau et les conditions de service. Si ces identifiants ne sont pas disponibles, envoyez des photographies et les dimensions principales.
Submit an Enquiry