Equipment Series
Metso Cone Crushers
METSO · Détails de la pièce
Counterweight Guard / Liner
Identify parts for Metso cone crushers, check models and drawing, confirm materials and processes, and submit an inquiry.
Identifiez le modèle installé et les dimensions clés, puis vérifiez la révision du plan et les interfaces physiques.
Metso Cone Crushers
Metso HP Series (HP100-HP800), GP Series (GP100-GP550) and MP Series
Select the material grade and heat treatment for the operating conditions, processed material and equipment specifications. The options below are commonly used; confirm the final grade against the drawing and technical agreement.
For abrasive dust exposure; verify hardness against the specific grade, thickness and material certificate.
For impact loading; heat treatment and acceptance hardness must follow the grade specification, drawing and technical agreement.
Select materials and surface treatments for lightly loaded positions according to the drawing and actual wear conditions.
Modes d'usure et conseils d'entretien courants ; le cycle réel dépend des conditions, du matériau et des données de fonctionnement.
Assess replacement against the guard plate remaining-thickness limit in the drawing. Replace if wear penetrates the plate or extensive deformation occurs.
Les exigences matière, traitement thermique, procédés composites et contrôles suivent le plan, les conditions et le contrôle technique.
Hardox 400 wear plate, Mn13Cr2 high-manganese steel, or wear-resistant steel plate specified by the drawing
Specify heat treatment for the selected material. Verify final hardness and microstructure against the drawing and technical agreement.
Weld Hardox wear plate using an approved procedure for the grade and thickness. Select consumables, preheat, interpass temperature and repair limits in accordance with the manufacturer's recommendations and the drawing.
Manufacture to drawings produced from part measurements or supplied by the customer. Critical mating surface tolerances follow OEM requirements. Use UT/MT inspection to assess castings for shrinkage porosity and cracks against the agreed acceptance criteria.
Des pièces de même nom peuvent ne pas être interchangeables selon le modèle, la révision du plan, les interfaces et les exigences matière. Avant fabrication, se baser sur le modèle complet, le numéro de série et les plans.
Provide the equipment model, drawing for engineering review and quotation. If service life or wear is a concern, describe the operating conditions as well.
Ou contactez-nous directement : +86 156 3797 3199
zzx@anranst.com
ANRANST provides customers worldwide with engineering assessment, production at certified foundries to drawing, quality control and finished-part delivery for custom wear parts and industrial spares, with scope to support other custom industrial parts.
Veuillez fournir la marque de l’équipement, le modèle complet et le numéro de série, le nom de la pièce, sa référence ou le numéro du plan, l’indice de révision du plan, la quantité, les exigences relatives au matériau et les conditions de service. Si ces identifiants ne sont pas disponibles, envoyez des photographies et les dimensions principales.
Submit an Enquiry